I cut another part of the girls, and the total is even greater than the first part! We wait another week for the final sums, but right now the flavor is unique.

All is good this week I'm just keeping a close eye on this lady and hopefully if all goods well she will bless me with her fruits from heaven 🤔😂😂. she's out of control for real. white widow autoflower is really a monster of a plant big ups to Dutch passion 💯 anyway guys peace ✌️

Fruity Pebbles autoflower is growing great I the Athena blended line nutrition. She is starting to go into a bulking stage. She has a layer of frost started. Everything is looking good. Thank you Athena, Medic Grow, and ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

420Fastbuds FBT2309/Week1 Week 1 update on these new sprouts. Been a week since they sprouted and so far seems good. I did switch from misting the top soil with my sprayer to feeding 500ml of water and 1/4tsp/gal strength General Hydroponics Calimagic. Started to get some rust spots on the leafs so I'll keep a close eye and see what happens this week and decide the appropriate action to take. Over all Happy Growing

Starting my flush this week using 10ml of Clearex per Gallon of water flushed down to 450EC or 225ppm, going to now continue watering with ph'd balanced water when dry with about 10-20% runoff. Going to keep an eye on the trichomes but I'm thinking I'm gonna harvest early to mid of next week. I'm going to try and bring out even more of the colors in the flowers this last week or two and I'm going to start watering with ice cold water not sure if it'll help or not but I'm gonna give it a shot. End of Week 13/Week 8 of Flower it went well the plants are flushed and are fading, going to chop in a few days.

She‘s doing okay. Buds are building pretty nicely. Top leaves are yellowing just a bit.

It’s growing well. The first pistils are visible. hey ho let´s go..... 💪

Upgrade: the main cola is getting pretty dense, so I got a clip-on fan to control humidity! Another upgrade: grow tent!

Lots of popcorn buds because I really did not understand defoliation or lollipopping and was too scared to try. I have since become a much better judge of what leaves to pull and when. This diary was just to create a record of every grow I have done so far. Thanks!

Week 27 december - 2 January Happy new year

Hey guys started flush on 17/11 run 8litres through her and will be watering with terpinator 2ml/l 2 litre a day for the next 10/14 days trichs are majority cloudy some ambers smell is strong skunky smell its a competition between the gorillas and her for the frostyness there both absolutely covered in trichs shes stacked to the roof should be a nice yield of quality super dense nugs shes beautiful just watching her finish ...put some better pics up thanks for reading happy growing guys

Día 15 (04/11) Las plantas se muestran esplendidas después del 1er riego e introducir la 1ª Bio Tab! 😍 Subo a DLI 35 Día 16 (05/11) Las plantas se muestran espectaculares y radiantes! Un color verde intenso y sano! 😍 Día 17 (06/11) CBD Auto 20:1 #1 tiene un crecimiento increíble! El resto tiene un desarrollo perfecto para sus días 17 días de vida! Día 18 (07/11) Mudanza y riego! Las plantas se mudan al armario definitivo de 60 x 120 cm por varios motivos: - CBD Auto 20:1 #1 está empezando a tocar las paredes del armario pequeño - CBD Auto 20:1 #2 ha tenido una ventilación menos adecuada que sus compañeras, ya que el ventilador quedaba justo encima de ella, y el flujo de aire era inadecuado Esto ha provocado que la maceta de CBD Auto 20:1 #2 no se seque a la misma velocidad que el resto. Espero que no afecte a su crecimiento - Las plantas pasan a tener dos lámparas a su disposición (230W + 100W) ajustadas con el regulador al 60% - Mantenemos DLI 35 tras varios ajustes (tener 2 lámparas simultáneamente es más complicado de ajustar!) - Colocamos dos ventiladores oscilantes para que el flujo de aire sea adecuado dentro de la carpa Riego: 4 días después del 1er riego, las macetas se muestran "ligeras" excepto CBD Auto 20:1 #2 por la falta de ventilación comentada arriba Riego con 750 ml de H2O RO excepto CBD Auto 20:1 #2 Día 19 (08/11) Las plantas se muestran esplendidas y creciendo mucho! Día 20 (09/11) Macetas poco pesadas, pero no lo suficientemente ligeras para regar Día 21 (10/11) Introduzco la 2ª Bio Tab a 5 cm de profundidad, lado izquierdo Riego con 750 ml de H2O RO a todas excepto CBD Auto 20:1 #2 que se riega con 1 Litro Aplicación foliar de Boom Boom Spray 5 ml/L. Aplicar justo después de encender la iluminación. Aplico LST a CBD Auto 20:1 #2 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/

Day 22 everything seems to be ok 😃👌 Day 23 still growing good 😃👌 Day 24 there is an upgrade with LED light... Spider Farmer SE1500 😃👌 the old light wasn´t good enough 😛👊 Day 25 the ladies are in well shape and a bag of CO2 also added 😂😃👍 Day 26 need to cut some of those big leaves... wish me luck 😲🙏 Day 27 alot of leaves cut off... 😵 but the ladies are in good condition 😃🙏👍

✋Wk 7: Will the size difference begin to fall in line with the predictions, and rearranging the wind. 👉 This week is Day 48 thru Day 54 total. (Feb 16 thru 22). Today (day 54ttl) the 1 gallon plant is at day 21 flower and the 3 gallon is at day 9 flower. 👉 This week has shown some interesting things. The 1 gallon plant is still ahead in the physical timeline, and has also started to demonstrate how the smaller pot is limiting its size. The 1 gallon has been ahead of the 3 gallon plant in size and stature, until this week. The 1 gallon has stopped stretching and is beginning to develop its flowers. I was worried it would continue to get bigger and may become an issue vertically as well as horizontally. The 3 gallon plant has grown a few inches and isn’t really stretching up yet, but it is growing overall in size. It’s a big dome of leaves right now. Its main cola is same height as a couple of the secondary branches. I doubt the main cola will remain the same but this plant hasn’t been typical from its germination so only time will tell. 👉 The other interesting thing has actually been trending this way for a couple of weeks…the run-off for both plants has been lower than the inflow and no low EC fertigation has been needed. The 1 gallons roots are undoubtedly densely packed in the pot. It takes several minutes to apply the nutrient solution. The volume needed has also increased. The 3 gallon still readily accepts the solution, but it takes more every day and the run off takes longer to start running out of the bottom. The saturation level of both pots has increased, and the 3 gallon especially. The EC for both has stayed below the inflow EC. This is unusual because part of the volume of water in the pot when saturated isn’t absorbed by the plant, it evaporates on all sides of the pot and the top of the media. This would leave the dried nutrients wich would rinse off at each fertigation adding to the TDS. The reduction of EC in the run-off means the nutrients are being utilized by the plant. I have dropped the inflow EC of the 3 gallon a little because I was worried about burn. I have kept the EC of the 1 gallon plant at the low end of the recommended EC range of the General Hydroponics drain to waste nutrient schedule chart for the Flora series of nutrients. I use the entire line of these nutrients. For the one gallon I had been giving it only the “simple program”, and the 3 gallon the “expert” (entire line). This week when I noted that the stretch has pretty much ended for the 1 gallon, and decided that I will go ahead and give it the expert mixture as well but given at the low end of the EC range still. Ive included the Fertigation log for the week. It shows the tent temps, the outdoor temps and HVAC setting. Also, I note when a fresh batch is made and what week on the schedule it is. Each pot has the recorded time of fertigation, volume, pH, and EC of the solution given and the corresponding run-off. I mix the solutions at full strength and use a solution with just silica and Cali-magic to reduce the EC to the desired EC. I mix that in at fertigation time. I also adjust the pH if necessary at this time. 👉 The structure of the 1 gallon is very stout main trunk, and each branch is very sturdy. The bigger fan leaf production has given way to smaller leaves. The structure of the 3 gallon also has a very stout main trunk and each branch is very sturdy. The 3 gallon has some very large fan leaves and it has lots of vegetation. Its very dense and hard to peer inside. For both plants I have begun to selectively remove branches that would not be producing anything but larf. The 1 gallon only needed the lowest main branches trimmed. I also removed some of its smaller shaded secondary branches and leaves inside the canopy. The trimming on the 3 gallon is similar, however its much harder to get inside. I just do a little at a time at each fertigation. Im not sure if the first set of branches on the 3 gallon will be tall enough to keep but I want to wait till the plant starts stretching to see what they will do. Ive left as many leaves as possible in the 3 gallon…a lot of really nice fat food factories. This plant may go very large, or it may stay somewhat stunted as it did during the early veg phase. 👉 I positioned the plants I closer to the back wall. I bought a oscillating tower fan and was hoping it would be a good addition to the tent. Alas, it had too strong of a wind current (on the lowest speed) and the 1 gallon was showing signs of wind stress after 2 days. So I removed the fan and re-positioned the smaller fans I had clipped up top of the tent. Both fans are now hanging lower on adjustable ropes and point toward the plants. They are working well like this and the air flow is good. I may modify the oscillating fan and install a variable resistor to the fan motor to reduce the flow. I have added the branch support to the legs of the stand the 1 gallon is on. These posts will be used to support the weight of buds or position them as needed. I will add the support posts to the 3 gallon plant after it has gone thru its stretch, maybe another 2 weeks for that.

This week is great the smaller one is growing. They both self topped and have branches going everywhere! I'm using lst clips to help direct them. Video will be added. Did use some soul nutrients as a booster to the dots.

Thought id take pictures as video isnt the best Removed a blue sherbert out as it had some issues, low yielder, top randomly died. Also on one of sundae punch the top died as i was moving Found out my double Ds plant was a male moved her out for a week in a 24hr tent to slow its growth, back in 12 12 soon. End of week 5 photos. Harvest time expected to finish september 13th

Heute geerntet und wow! Tag 83 und sie riecht so fruchtig ! Die trichome haben eine schöne gelbliche ,milchige Farbe. Sie hat nass 352g auf die wasge Heute den groben Trimm gemacht und gewogen. 105g und sie riecht so brutal gut und voller trichome

Many colas and hard buds here! Hope to get good results, even if i got some deficiencies. One of the three had some issues and didnt flower properly, the buds are airy and there is little resin production, while the other 2 have frosty and well stacked buds. I think they will need an extra couple week to finish off. As soon as i see 100% milky trichomes with 10/20% amber i will cut them down. Gonna keep u up to date