Week 8 of flower 9/27/24 Stopped giving T.A. FinalPart after a week because plant showed sings of nutrient burn. Started watering with only water to leech out nutrients from the media to get the plant to cannibalize itself. Hand watering ones a day at the beginning of the light schedule. You can see in the video, one of the colas and the area near it got heavily burned from excessive nutrient salts in the media, I attribute it to the 3 days I watered the plant without runoff in mid flower. A couple more days and it is time to chop :)

June 26, day 98, the Euforia is in it's final ripening phase, and will be harvested soon! I am dialing down the EC, although I do not do any major pre harvest flushes. June 28, day 100, emergency harvest time! I was going to push it another 3-5 days, but when I was examining my fattest cola I noticed the physical manifestation of my nightmares: early stage bud rot. I should have harvested days ago in hindsight, as days of rain pushed my RH up into the mid-high 60s. I only noticed it because I was bending bud tissue away from the stem, but there was clearly some white fluffy buildup around the base of a dead leaf stem. The good news is that I caught it very early, no bud tissue has died anywhere on the plant and what mold I could find was still white and fluffy. I had to immediately cut down the whole plant as a result. I cut away bud material around the few moldy spots, and put the rest of the buds from those colas into my pile for edibles/oils. 95 percent of the colas seem totally unaffected. Nevertheless, I have had to totally switch up my dry/cure technique by doing a wet trim of the large buds and a quick dry/cure to start to make sure no spores can spread elsewhere. My priority is really saving what has been accomplished so far. The good news is that early wet weights are very heavy, even with the bit of bud removal. 600g wet for the top colas, another 350g wet for the mid grade buds, and finally 1000g for the low grade buds left of stems for slower drying. This means I will hopefully end up with 200g+ dry bud for vaping and smoking, and much more for edibles, rosin, etc. I will have more details next week with the full harvest update!

It was a good, busy week. The clones are down, dry, and now jarred. Total weight from them was 5oz. I didn't think I was going to get more than 2oz because I didn't put much effort into them. However they all turned out pretty solid for growing led and soil 😎 The mothers come down in 9 days and I'm definitely looking forward to seeing how dense those will be! I'm pretty sure a certain someone is going to be donating to some polar bears 😏 because I'm damn sure getting more than 2.5oz per plant 😎 That's about it for now, happy growing everyone ✌️🍀✌️

Hello guys, I would like to share some thoughts with you. In this cycle I messed up with: - light bleaching This is the main reason why the plants slowed down in flowering cycle, everyone who would like to try this strain MUST keep in mind that it's TALL and STRETCHY, and in my case one of them grew up almost to 80cm with just 9L pots. Moreover, they should have done more flowering weeks to fully develop their buds, but with the first two plants I messed up, and with the third, even though I would have let her go up to 90 days, I didn't have time left due to other reasons. Anyway, I vaped and smoked the first harvested plant, guys... it's DEVASTATING!! Who did ever say autos aren't potent?? A fool! This weed gives you an instant headbang which then turn into a really creative high. Every plant in my grow has different aroma (in addition to the size and plant structure), in fact my only complaint is: Strain behaviour inconsistency, they were so much different from each other. On march I will run Skystompers, but I will supercrop them and maybe buy a grownorthern telos :)

Looking good I can see the lit og genetics in the way the hairs are forming

Alors aujourd'hui je fais du BHO et pour vous remercier de votre fidélité je vais vous montrer ma méthode (que j utilisé dans le passé (j ai depuis acheter du matériel un peut plus professionnel ;) Alors pour tous sa il vous faudra =1..2 seringue de 300ml ou plus dispo sur mamazon = des filtres à café (NON BLANCHIE !!!) =des colier de serrage pour fixer les filtres. = et bien sûr du gaz (butane et en général je prend du gaz filtrer 12x pour éviter les saleté qu il peut y avoir dans certain gaz . =et enfin il vous faudra un bol pour récupérer tous le nectar^^ (J UTILISE DES MOULES A GÂTEAUX EN SILICONE (rien qui accroche) Mais si vous utilisez un extracteur en plastique et ou un moule en silicone il faudra absolument prendre du butane et non pas DME =CAR LE DME ENMENE DES PARTICULES DE SILICONES EY DE PLASTIQUE LORS DU GAZAGE Voilà voilà je vais commencer et prendre des vidéo au fur et à mesure que je vais poster pour vous montrer . Après 1heure de dégazage vous aurez une fine couche ai fond qu il va falloir travailler pour y faire rentrer de l air (ne t inquiète pas j vais poster une vidéo se soir ou tu pourra voir comment faire..) Le crumble est je pense la seul sorte de bho que l on peut faire sans trop d équipement (pour le reste il faudrais evaporatrice rotative ou autre etc ) Avec le crumble c est votre main qui fais le travail = l objectif est que l air touche toute les partie de la patte comme sa le gaz sort et l air oxyde les trichome etc etc

Anche queste albicocche crescono molto bene.....sempre complimenti a fast buds e a me🤣😂💪.sono robuste e anche lei con tanti punti dove fiorire....

Tricomes telling me she's pretty much done.. gonna let her go maybe another week.. she's super dense, Budd are hard as a rock..

Semana 7 de flora,pegou muita chuva e perdi alguns tricomas mas estão se recuperando,as flores estão gordas e densas,com muitos tricomas, cheiro doce com notas cítricas e terrosas

Very happy and healthy plant.. i look forward to flipping her to flower with the other two I have going in the next couple weeks.. I like variety.. I'm excited for this one Atlas seeds has not let me down yet..Happy Easter to everyone God bless and happy growing 🙏

Day 114. Gorilla Max is totally ready, maybe she would bulk up, but last white pistil went brown at least a week ago. Time to trim. Bud not solid, but kinda hard, bottom all airy and small, but she smells and sticky like hell, so fruity ... Had to chop her, because got tiered of seeds everywhere, so cleaned my draws and fridge, from 45 found bag seeds started new diary, had to make space for them. Want to try out 12/12 from start and even if i would leave them under natural sun , they would stretch too much in first stage of grow and would repeat that grow patern indoors. Scissors hash was nice, super soft, hard to roll, all stays on hands. On this plant found two seeds, maybe some hidden in colas, but its not even close to bad that i was imagining at the beginning. My watering damage is obvious, Gorilla Max and Bunny were best plants, now - they are smallest... Last weeks very important, till week 5 of flower and that incident they were leaders, overdrying don't work . Hope i will learn this lesson. Day 120. Last 3 girls are down. Gorilla Max - 88 g. Of dry bud. Think she and Bunny will be smallest of them all. Buds are airy, but very sticky and all calaxies went pink. So in spliff it looks really funky. Needed to lolitop them higher, maybe overall look and cola structure would be better then. Lanky Gorilla is a champ, no doubt. Think this girl should beat 4 ounces easy. Day 126. So total of all 4 plants is 401. A bit less than was hoping, but target achieved. Update will follow.

Very good strain with big yield in short time 7week bloom Bushy with big nugs everywhere Smell a litttle skunky and strong genetic Made some clones with stems forgotten in a glass of water in one week Not a lot of resin on buds like an old strain Full of pistil cool high0

Cali smoke on and off lately- plants don't seem to mind too much. They've been flowering for more than about a week now - I've up'd my nutrients a tiny tiny bit - fairly consistent though. A couple of pests - leafhoppers - have been spotted tearing some small holes on a couple of my leaves Just have been flicking off about two or three everyday, nothing to serious to worry about I think. Also, I sprayed a foliar spray 'Diamatacious Earth' about a week ago - all over the bottoms and under sides of my plants - I'm hoping to not have to re apply another spray but might in the next couple of weeks if pests continue to infiltrate! I went overboard on the tablespoons I used in my hand sprayer, applied a thick layer haha. OVERALL - Plants maintaining healthy growth. Might look to lollipop or remove some unneeded giant fan leaves soon!! THANKS FOR READING!! AUGUST 26, 2021

Están creciendo bien! he aumentado la potencia de la pantalla a casi el 50%. Estaban en 25%. Están comiendo muy bien y asimilando el producto de lujo. Dos de las tres ZKITLLEZ salieron con un solo cotiledón una de ellas está bien y la otra está mutante jeje. La otra nació sana con sus dos cotiledones y va perfecta. 🌴💚😎 Las Runtz dos de ellas no salieron y tuve que germinar dos mas un poquito más tarde🤦🏽 La única que salió bien está de lujo! 😄 Y las banana green están tirando como si no hubiese un mañana han salido perfectas y germinaron muy bien!☀️😃🤟🏼 🛑Esta semana empezaré a echarle el Tripart de Terra acuática, en el enraizamiento he utilizado deeppeer underground, Rhino Skin y 1GR de Bactohemp por 1L de agua.

Green Crack: Afghani x Skunk #1 x Ruderalis Grown under 1000 Watt Phlizon LED lights. Actual Power draw is 245 watts Oct 4, 2019 : Planted seeded at 8:30 pm in 80% Canna Coco Coir, 20% perlite, with Gaia Green slow release nutrients Oct 13, 2019: First day - sprouted early evening. Slow to sprout at 9 days later. Oct 18, 2019: Day 6 - replanted in a 4 gallon presoaked pot 60% Wiggle Worm Castings 25% Miracle Gro Perlite 15% Canna Coco Coir 9 tablespoons of Gaia Green 4-4-4 3 tablespoons of Gaia Green 2-8-4. Topping with 5-7 or so tbsps of nutrient amended Canna Coco every few days

flush!

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Not a whole lot is happening this week, still having some PH issues in the medium, I believe this is from the microbial mass I added a while back. A microbe product, PH going into the medium is around 6.5-6.8 and coming out is between 5.5-5.8, so something is acidifying it up. Also noticed the runoff last week was a bit higher at times. So lowered the feed down quite a bit, going in at 1.4EC vs 1.8 will bump it up to 1.5 and 1.6 in the next few weeks. I also added in a bit of a PK booster. nothing to crazy only 60ppm worth on a total allowance of 700PPM Lights now running at 100% with V1 spectrum, decided to go with 100% now vs after stretch, will see how it works out. Till next week. https://medicgrow.com/ + https://seedstockers.com/ Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/SeedstockersBarcelona/ Twitter: https://twitter.com/medicgrow + https://twitter.com/seedstockersb Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/seedstockers_seeds YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/channel/UC4GiFYrIWeNtwtXjcivCmfw Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/seedstockersofficial https://growdiaries.com/seedbank/seedstockers