Perfect growing conditions the past week , using heat mat in off cycle to maintain nice warm nights . Started foliar spray today . I did notice some perlite turning green obviously because I’m keeping it too moist , I’m repotting in a week so hopefully it’s only a minor issue .

Nun ist es bald geschafft und ein holpriger Grow geht der Ernte entgegen. In 3 Tagen plane ich die Ernte. Glücklicherweise waren die letzten Wochen für die Mädels nicht mehr so stressig, um so mehr für mich 😜 Die Temperatur und Luftfeuchtigkeit aufrecht zu erhalten war nicht immer leicht. Ich habe viel Zeit mit basteln verbracht 😎 Es hat sich gelohnt! Mittlerweile sind die Blätter schon recht hell und haben sich stark zusammengezogen. Die Trichome sehen milchig bis leicht bräunlich aus. Sie richen appetitlich 😋 wie ein Gewürz

24-07-21 Week 5 Flowering Day 34 🙌🏻 I apologize if I'm not active lately I've been busy and haven't had time to upload any updates. 😬💚 Today we are in the fifth week of flowering! As you can see two plants are missing..😅 That have been removed from the tent due to (hermaphroditism) I don't know what caused this. But I only managed to save the Meringue which is growing outside, she is fine now and in shape! I removed her because I found a seed on her, at the time of the beginning of the general flowering of the plants. While the K-Mintz I had to kill her because she kept growing only seeds without seeing any female sex signs. I didn't have choice. Leaving the latter, the survivors are the Lemon Tree and the Mimosa. I'm really happy with them! They are strong despite having had some problems due to wrong PH value (7.1) now it seems for a week to have corrected the right value bringing it to 6.5 at the drainage of the plants. I will be uploading new updates soon! Thank you all for being here 💚 see you soon!

Wizard Fuel - Wizard Trees Day 98 🚿 She has been watered twice this week, with 3L of RO tap water with nutrients mixed individually, in order and then pH'd to 6.3. Shes a week away from harvest, so Ive reduced her nutrients over the last two-three feedings, so she is just getting the Acti-Vera and BioHeaven at the moment 💪🏻 ✂️ She has been given another round of defoliation this week, mainly focusing on removing fan leaves and larger sugar leaves from around her flower, so that any shaded areas are now exposed to light - this is to ensure her flower matures as much as possible before harvest 👌🏻 🌸 Her flower is looking just how it was advertised, which I'm super happy about! Vibrant light green with the contrasting ambers of the pistils, sat upon fat juicy goofballs, with the trichomes from stem to sugar leaf tips, shimmering in the light - she is so beautiful! Her aroma is also quite striking, very candy meets gas! 😍 Around 90% of her trichomes have turned milky with around 5% amber and clear each, basically all of her pistils have turned amber, so I will complete this week of flush and then she will be harvested 🙌🏻 Notes: I had taken a small sample from the lowest budsite on the plant, dried it for a few days and then tested it in the Arizer Solo IIIv2 - she is definitely leaning more into the Rope Fuel side with the citrus and diesel flavours up front with a lingering sweetness; its very nice! The effects hit pretty much straight away in the eyes getting tight and the smile smaked on my face - I can already tell that this one will be grown again! Very nice so far! 👌

Que pasa familia, puesto que la compañera y yo estamos bajo mínimos, hemos decidido proceder a un lavado de raíces temprano, y un estrés hídrico para limpiar raíces y estresarla un poco. Todo va sobre ruedas , puesto que el Covid afecta al confinamiento, decidimos cortar las gorillas estos días siguientes para secar y en nada tener algún bote para subsistir 😂🤣. -El estrés hídrico es reducir cada riego la cantidad de agua, para que la planta se estrese y escupa tricomas sus últimos días. Esta variedad de sweet seeds es INCREÍBLE, aun cortándola pronto me parece que los resultados son inmejorables, su olor a melón me encanta y se ve repleta de thc. Nos vemos en la cosecha fumetillas, y mucho ánimo para todos.

Wat een mooie week heeft ze weer achter de rug. De toppen zijn aardig dik geworden en sinds ik haar alleen water geef zijn haar bladeren steeds meer geel geworden. Ben echt super tevreden met hoe ze zich ontwikkeld heeft tot deze prachtige dame. Dankjewel weedseedsexpress, echt een mooie strain. Ze ruikt heerlijk. Aankomend weekend gaat de schaar erin. Ik zal de aankomende dagen nog meer foto's uploaden. To be continued...

Now I'll show you how to do LST & Defolation on Autoflowering strain You should do all this in the third week of vegetation, after which 90% of the plants will continue to vegetate for another week (5 weeks instead of 4) and grow very large autoflowers

I think there’s been some sort of salt build up / nutrient lock. The lower leaves have been turning a lighter green and some even yellow on SL plants. Most stems are red. Seems like it’s a pH problem. I flushed them with 4-5 litres of water to reduce the nutrient concentration in the roots. Going to introduce molasses in next feeding! Organic Unsulphered And also stop the Micro (nitrogen)

Que pasa familia, vamos con la segunda semana de vida de estas GG4 Sherbet Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. Vamos al lío , las 2 plantas se colocaron en macetas de 0.6 litros y asomaron 2 El ph se controla en 6.2 , la temperatura la tenemos entre 21/24 grados y la humedad ronda el 50%, esta semana siguiente seguro que les realizó el correspondiente trasplante. Iremos viendo cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

My Skunk Apple plant's a little behind the others. I think it started flowering a couple weeks later. It's a smaller plant, but it's finally starting to fill out. I'm guessing I've got maybe two weeks left before it's ready to chop. The past week has been awesome for drying my plants. The weather's been perfect – nice and dry, with just enough breeze to keep things moving. I finally got around to chopping down those two big plants I've been meaning to trim. They're almost ready, just need a little more time to dry out completely. I can't wait to see how they turned out.

En su Nuevo suelo y con los microbios ganaron vigorosidad, las hojas están frondosas, y sus tallos engordaron, la verdad siento que prometen mucho 😈

05/03 - (C) - All the babies are coming along amazingly - They are in week 2 of early pre-flower and white hairs are setting in accordingly - Since the addition of the drip lines and keeping their feeds consistent they are thriving and coming into flower without any issues. 05/03 - (M) - The mother is also coming along nicely - Dense nuggs with heavy trichome build up on all the colas - I have increased her feeds to twice a day at 1 minute feeds per cycle. 05/07 - Disclaimer - Please disregard the weeks on the grow calendar as I am now they are offsetted for Mother - Clone harvest. 05/07 - (M) - Cutting down the mother this weekend, She seems to be suffering a bit from being ran so long (Lessoned learned) - Her buds are dense and frosty af!!😎😎😎- Her dry run will be as much as 60-60 can be (Low and Slow). 05/07 - (C) - Clones are in early flower running accordingly - since hooking them up to the Vivosun Drip system their feeds have become more consistent allowing them to feed on schedule - the feeds are offsetting clean water and nutrient feeds - They will continue to run in the 3x3 until the mother is dried out and harvested then they will be moved into the 4x4 - I will also increase "Cane Molasse" dosage to increase trichome production and facilitate and more robust terpene profile for all of them. 😎😎😎😎.. Peace and Bud..

Week went smoothly cant complain....cutting are doing well also took 4 cutting of seed(think it's from applelicious) they already rooted n transplanted going to veg for a lil n send to flower to see if it's worth

This week has been one of great gains in both size and vegetation we have seen a vertical leap in two plants that is astronomical almost 4 inches in a week! Had to do some pruning to expose new bud and a little bit of low stress training on to plants to see if we can expose light to the underside and perhaps get a little more love out of our lower buds The stalk size on almost all of these plants is almost as big as your thumb but on one it is actually relatively skinny that is the one we’re doing the low stress training on we just started the low stress training and it is taking very well to it One of these plants is extremely dark in color on the vegetation and has typically about 11 fingers per leaf! Not sure what that means yet

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 61 since time change to 12/12 h. Hey everyone ☺️. Today the time has finally come and the last week of flowering has begun 😍. She looks beautiful and her buds smell very tasty 👍. The trichomes are 70% milky and 30% amber. The lady comes in complete darkness for 48 hours before the harvest. Of course, as always, there will be a small interim update of the harvest before the last major update. Until then, I wish you all a lot of fun and stay healthy 👍🙏🏻 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Week 7

(Log date week 7, day 49) So this week was a mixed bag, Tuesday started off with me finding a spider web on one of the lower fan leaves on my Hulkberry plant and noticed some bite marks on some of Fat Banana. In my haste to give rid of the spider mites, i caused some minor wind damage to some of the fan leaves on Hulkberry which caused some copper spotting and a stunted Fat banana cola. After i correctly treated both plants for spider mites and wind damage, they both bounced back and started to recover quite nicely. I also noticed a difference between topping these plants at different times; i topped fat banana when it had 4 cola's but i waited until hulkberry's roots reached to the bottom of my 5gal bucket and she had 8 cola's. A BIG difference in their recovery and overall structure, where fat banana jump out the gate with explosive veg growth and hulkberry struggled for two weeks just to develop it's first set of fan leaves. To now whereas hulkberry is much bigger, greener and bushier than fat banana. Hulkberry has responded much better to the additional stress whereas fat banana has struggled or stalled due to the stressful conditions. All in all wasn't too bad of a week, except for the power going out for a couple of hours on Saturday which raised my grow-room temperature to 90f, i was able to put out a couple of fires this week without any adverse long term effects. I also topped hulkberry on the last day of the week and I'm going to continue to feed them Technfloa at the full recommended strength since they have both responded very well to last week's formula. as always my pic are in chronological order Mr. O.G.T

This week was great took some more cuttings .....testing wich method is more successful .... airoponics vs coco perlite mix Same light same hours ...no nutrients ....lost 1in the coco perlite dome

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....