Likes
Comments
Share
Day 29 - Second day of light defoliation only at the base. LST continues along with regular tucking Day 30 - flowering is kicking in for two of the girls and they are starting to get some stretch going on. They are not very tall but sure seem happy. Day 35? - Final pics posted for end of week 5 and week 1 of flower is killing it. Got the light dialed in after researching the par output on my light and watching some reviews. It’s now at 18 inches running 100%. 335 watt draw at the outlet. They seem to be loving it. Day 32 - finally finished the watering system. I can travel now if I have to.
Processing
Likes
6
Share
This week I defoliated slightly for better air circulation and improved light penetration, mainly removing leaves blocking budsites that had purple petioles. They seemed to respond good. Also foliar sprayed with light potash solution, upped pk with guano and provided micros with seaweed extract. Feed EOD and water with silica in between feeds. RH now around 50-50% most of time. Improving air circulation is now top priority on to-do list
Likes
1
Share
@RezaM
Follow
Everything was going well in the first week, but unfortunately, a mistake caused stress in the plant. The distance between the lamp and the plant was too short. This week, I gave the plants a small amount of root growth stimulant
Likes
24
Share
Woche 5 hat gestartet und ihn geht es prächtig sie verändern sich täglich, eine zeigt Mängel auf aber nur minimal. bin gespannt noch circa zwei Wochen Wachstum dann in die Blüte. Die Girls wurden langsam LTS gebunden und topping wurde gemacht bei jeder Purple Punche wurde durch random seid ersetzt sieht bis jetzt gut aus
Likes
43
Share
Medium: Yep - still gonna beat on the DWC drum. It just gets better and easier every run. Almost religiously changed out the res. every week and this was definitely overkill. Could’ve easily gotten away with every 10 days to 2 weeks. Stuck with peroxide this run again instead of going with bennies via hydroguard or hygrozyme. The results speak for themselves on a 6 week veg. That’s for sure. Still save’n them dolla bills on the nutes too. Minimal nute mixing (as well as simplistic regime) and for what we’re using in each res. - gotta be easily a 50-60% savings on nute consumption vs. more traditional methods. Honestly makes one wonder why organic soil grows are seemingly all the rage. I’ve found terp. Profiles, structure, plant health and of course yields to all be just that much better in straight water. What more can I say, we love our DWC. Method 🎚️🎚️🎚️ The dueling methods were the whole point of this grow. Our best attempt to illustrate the differences between LST vs. LST/Topping ie. just how significant is the difference in terms of overall production? The truth of this test is a bit of a double edged sword. On the one hand, topping does have a significant effect on overall yield. This fact is regardless of whether or not from seed or clone.That said and when it comes to clones, you still have to be mindful of the drawbacks of further dividing (and thus reducing nug size for) main branches. Our topped clone #2 is a perfect example of this. While the structure demonstrates significantly more branching, the nug sizes are also significantly smaller. As you’ll see in the yield details it does somewhat make up for this through a higher overall weight but it was also a much less manageable plant than #1. Root mass on the topped plant was heavier and bulkier, drinking much more water than its counterpart. And in late flower half the plant was pretty much falling over. While some of this is attributable to the extremely hollow stems (and thus a carbon deficiency), making the most of the grow light proved difficult with the topped plant as bushy as it was. Basic summary - if ur cloning for profit or efficiency, stick with straight LST and grow a whole bunch of em. If I had to do it again I don’t think i would’ve bothered with topping - just for the sake of greater ease🤔🤔🤔. Then again, I’m greedy as fuck when it comes to my yields so I Could totally see myself trying to max everything out and go for broke🤙🤙. 3/5 volume bars for the rating - we accomplished what we were trying to. Yield/Harvest🌴🌴🌴🌴 Awwwwwe yeah - down to where it counts and these girls were champs💪. While internodal spacing was longer than necessary and overall bud size was smaller than average; these plants pushed out some solid weight👍😎👍. Ran er through a 7 day dry and all jarred up on a slow cure. Final numbers: Total yield - clone #1: 5.14oz = 143.92g Total yield - clone #2: 6.01oz = 168.28g Approx. est. yield: 600g/m2 divides by 4.8, multiplied by 2 (approx. for 2/3 the cabinets sq/ft) = 250g per 0.41m2 Actual yield: 11.15oz. per 0.41m2 = 312.2g per 0.41m2. That is some seriously good production right there😎👍😎. The high end avg. for this strain is 650g/m2. When you crush that out to my space and the numbers above, it works to about 270g per 0.41m2. Our actual yield still destroys the high end avg. by almost a zip and a half👍👍👍. The cree cob does it again. Fuck’n jazz hands y’all🙌! With results like these you could really give the whole grow a 9/10. It’s only an 8 in my book because it’s not my preferred high. Otherwise, any time you’re north of 5+ oz. per plant, it’s a good day at the office👍👍. Props👊👊👊 No choice but to shoutout Humboldt genetics. These beans have treated me so well and I can’t say enough Good things about the strains this organization puts out👌👍👌. Other than that, thanks to everyone who dropped by for a look and a comment. The convos always good and of course - any questions or enlightened conversation are welcome. Every time I try to take a break from documenting a grow, I end up growing something worth documenting. If your as high as I am right now, you should still be trying to figure out that last sentence.... stay lit y’all. See ya soon on the next one👊👊👊.
Processing
Likes
17
Share
Day 7. we will now move the cuts from under the t12 lights on the clone table to underneath the shade leaves of the mothers under a Mars 300 (150 hps equivalent). They will remain in the propagator until day 14 as they must wait for the girls currently occupying the pre-flower area to graduate to the flowering tent. We will still spray Clonex mist once every day until roots are visible
Likes
8
Share
I don't have much to show or say for this week.. It was incredible to notice the radical differences in the plants appearance in just sever days but it was also quite nerve wracking!!! Once I got the plant transferred I decided to go ahead and feed her with Green Planet's Medi-One (an organic bottled nutrient that I still had lying around). The original plan was to attempt a dry amendment grow but as the dry amendments where no where to be found after placing my order, I opted to use what I had handy. I went ahead with a water soluble nutrient that would immediately activate the roots and supply nutrients to the sterile medium and I am happy that I did. The very next day after the 1st feeding the plant already started to look different and just "perkier"
Likes
Comments
Share
@The_Mira
Follow
16.-23.12.2025
Processing
Likes
13
Share
Another week done, finished up week 6 of flowering, week 10 of the whole grow. The buds are continuing to fatten up, inching closer and closer to harvest. Noticed the first few Amber tricombs on some of the upper buds, going to be leaning off the big bud and switching to overdrive to help aid in ripening and the final bulk. I’d like the run them another 4 weeks giving them a full 9-10 weeks in flower. But will judge harvest on a near 45/55 or 50/50, Cloudy/amber tricomb production.
Processing
Likes
5
Share
@ladyjane
Follow
8/12 - Dropped 3 seeds into RO water to germinate 8/13 - Placed seeds into moist paper towel and into plastic bag to germinate on heat mat. 8/15 - All three seeds sprouted. In the morning I prepared three 3-gallon pots with Roots Organics Original Soil and Nature's Living Soil Autoflower mix. I will be doing Super Soil method for this grow. I filled the bottom one third of the pot with regular soil, then added 1 lb of Nature's Living soil and mixed it in. Then filled the rest of the pot with the regular soil. I topped it with Mosquito Bits for added BTI for pest prevention. Finally, I wet the pots down with RO water and Organic Black Strap Molasses. After about 8 hours, I planted the three seeds and placed them in the 4x5 tent with a humidity dome to keep in moisture. 8/16 - Two of the three already have their true leaves. So, I have removed the humidity domes from those two. 8/17 - The last of the GSCs have sprouted her true leaves so I have removed her dome. I sprayed them lightly again today with RO water and molasses.
Likes
150
Share
Ras ! Que du bonheur cette montée en l'espace d'une semaine ! Tout ce déroule bien !!! Pour rappel : Black Domina 0 (en pot) Black domina 1 Purple 2 Big Bud 3 Big Bug 4 Blzck Domina 5 Purple 6 Blzck Domina 7
Likes
16
Share
@Momentum
Follow
hängt oft ab, verträgt die Hitze nicht so gut, wie die Oreoz
Likes
13
Share
This week she got the works.😎👍 going for max buds. Had to put sand in so i could kill of the little black fly's that lived in her soil...and the soil of the other plants. Got rid of them for 80%! I water her from the bottom now. The sand gives it a nice looking pot😎👍. This week will LST the tops too. Going for big!😉😎 9/5/21 : new LST for the queen.😎👍
Likes
35
Share
@Zengrower
Follow
The Frosty Tooth germinated within 2 days after placing it in the seedplug. I immediately placed the seedplug in the final 11L container. The soil is Plagron Allmix so I don't have to add nutrients for the first six weeks. I will add some Plagron Power Roots in the next few days to stimulate a strong root system. Let's see how this little seedling will grow in the next few days. Stay tuned for more updates and pics later this week ✌️ After the little seedling germinated it barely seemed to grow at all. My first guess was that it had to do with the low humidity (45%). In my GTools I have a humidifier, but that's not an option in the Minigrow. So I gave the seedling a mini plastic bottle greenhouse and she immediately recovered!
Likes
6
Share
10/13: I fed her about 24 ounces of compost tea today. I had brewed 5 gallons of tea using 90% rainwater collected the day before, and 10% aquarium water. My tea contained about 2 cups of very rich compost a handful of biochar, a tablespoon of 7 diff species of endo-mycorrhizal fungi + 25 species of beneficial bacteria, 8 tablespoons of big bloom (mainly for the earthworm castings), 2 tablespoons of liquid molasses, and a tablespoon of kelp me kelp you. It had been brewing for 48 hours and was very frothy. I'm seeing signs of calcium deficiency on a few plants today, but the tea should correct that. I'll add cal/mag to the watering regimen anyway. 10/14: With so much light and airflow, she's drying out very quickly. I fed her about a half-gallon of water with grow big, big bloom, kelp me kelp you, boomerang, cal-mag+iron, armor si, and soluble humic acid. I also foliar fed her a few times with humic acid and big bloom. 10/15: I foliar fed with big bloom and a little kelp a few times today and peeled back the insulation in the attic above the closet now that it's getting colder outside. It brought my daytime temp down to 81f! 10/16: I fed her about a quarter-gallon containing all the good stuff, at full strength for the first time. I also misted her really well with Ph adjusted spring water a few times throughout the day, just to rinse off any built-up nutes. She never showed any signs of a calcium deficiency, but I dosed her heavy with cal-mag with this feeding anyway. I did some leaf-tucking today, but have decided not to FIM her. I really don't want to increase her individual footprint since she has so many neighbors. 10/17: I rearranged the garden a little bit and sprayed her down with ph adjusted tap water a few times today. She's looking great! 10/18: Today, I did a myco root drench, with a little added boomerang for all the aminos, vitamins, and earthworm castings, and some cal-mag. I soaked her thoroughly with about 3/4 gallon and let her sit in her tray to soak it all up. I'll let her go completely dry before I feed her again so that she really drinks it all in next time. I lowered the lights to 20 inches above her right at dark, so she'll wake up to an especially bright sunshiny day! 10/19: I was gonna rearrange this morning and had no space to work with, so I moved the 4 smallest plants in the garden into the "upper deck." Now she has a little more elbow room. It's the last day of week 3 and I'm really impressed with her progress. If I had more space to work with, I'd definitely be doing a little training to try and maximize my yield from her.
Likes
12
Share
@ktkoi
Follow
Day 48: Just finished my video from seed ordering to flowering. Mexican & CBD are in size 0.8L pot, while Green is in a 2L pot. Green was the first to shoot up so I put her in a larger pot but bent her stem under the soil which stunted her growth for a few days until her stem toughened up. CBD is now the tallest. Mexican was a runt to start with.
Processing
Likes
7
Share
@Mrg7667
Follow
FUCKING FINALLY!! cant believe there tranplanted and about to be flipped its been about a total of 40 weeks since the two bigs have started and maybe weeks 25 since another 1-2 and the the rest about 15 weeks WAYYY to dam long but thats how it goes its all learning curve, and life happens for sure! There roots are absolutely massive they where so ovegrown for the 2 gal once again so thats all on me. Only snagged 1 root on one of the bigger guys, got caught on my LST hole i made on the pot. Took of all LST training stick because im going to use a trellise to train all down for ecen canopy before i flip! Next post will be day 1 flower! WHOOO 🕺🤦‍♂️ Added great white to soil when transplanted 2 teaspoon for 5 gal pot
Likes
22
Share
Well she has grown that's for sure. She needs to be transplanted to a bigger pot. Also defoliated... I will attempt this tomorrow. I need to acquire a bigger pot. Worse case scenario I use a 5 gallon bucket, and drill some holes. I'm switching to flower 12/12 this week. So she is going into a 15 gallon pot now and getting a good trim. Go check out Viparspectra products they have what you need. https://www.viparspectra.com/collections/xs-series/products/xs-series-xs4000 Use code, "GDVIP" for an extra discount.🤗
Likes
14
Share
@suchydog5
Follow
2-3 buds were moldy so i had to cut them hope it doesnt spread further😳 to be honest i havent seen more beautiful flower than this purple one❤️