Likes
Comments
Share
@R2d2420
Follow
Good week , no issues to report. The Gelato glue are almost there. Starting to see a few amber ones & 90% 9f the rest are cloudy. The 5gallon are fatter & a bit more advanced than the 7gallon one. The Gelato are bigger but are a few weeks behind. The plastic pot stayed wetter and is more leafy than the fabric one. Still to early to say which will produce more or better buds
Likes
5
Share
@Naujas
Follow
I came back after vacation, the girl is ready for cutting, the rainy weather has started, so there is a threat of rot, you can say I managed to find just a few small pits in time and removed them and threw them away, the big and stiff flowers look fantastic:) but after a long trip I was tired, so I didn't take quality photos :( no everything else, I am very satisfied with the result I got:) its smell already lets me know that it will be good:) a lot of sugar leaves from which I will make bubble hash:) I will update the weight when it dries.
Likes
48
Share
Chopping these little ladies was pretty simple because of their size but trimming was a sticky mess I had to clean my shears after every buds because of the amount of resin. I will be growing this strain again with an actual veg so I can see how great it really is and I definitely recommend you try it as well
Likes
22
Share
Hopefully I haven't left it too late to fix, added nitrogen fertiliser (liquid) 1ml/1ltr with their nutrient mix, waiting a few days to see if they get back that lovely green colour again, probably should of left the damaged leaves on until I see healthy new growth but I cut a few of the worst looking ones at the bottom.
Likes
2
Share
This phenotype #4 was removed from the grow tent after 2 weeks of veg due to a deficiency I'd never seen before. From what I've researched, it could be sulfur; it didn't seem to be a disease, but it produced excessive resin.
Likes
26
Share
@MG2009
Follow
03/05/2021 Beginning of week 4 looking good, I think she will start flowering in week 5-6, so I might top her, she is growing fast so I hope it will not harm flowering time. Ps. I did top And 24 hours later I can see all is well, where I topped her is healing, and side branches responding! I know she will be ready for flowering. Check out video and see.
Processing
Likes
52
Share
Likes
4
Share
Hola a todos ,ya desde la semana pasada que vengo regando solo con agua porque no falta mucho para el corte aproximadamente 10 días. Los cogollos no han engordado como lo que esperaba, en comparación a la misma "genética " del año pasado.Tambien he notado que el tamaño de los cogollos es menor, pero si son más compactos y más densos. Esta semana empezaron a tornarse la mayoria de los cogollos en un tono purpura, como así también algunas hojas, también indicadores de que el final ya se aproxima, a todo esto hay que sumarle el descenso de la temperatura también es un factor para que los cogollos y hojas se pongan de ese color. Así que de aquí a que llegue el día del corte solo regare con agua.
Likes
89
Share
@nonick123
Follow
Antes del resumen, decir que el controlador Tent-X de TrolMaster es una pasada. Puedo ver y controlar la VPD en tiempo real con la app de mi Smartphone Una maravilla en esta fase de floración avanzada! 😍 _______________________________________________________________ Día 69 (25/03) Su hermana Gorilla Cookies FF muestra una ligera necrosis... me preocupa... Día 70 (26/03) Necrosis en Gorilla Cookies muy avanzada en solo 2 días. Hablo con el gran @dogdoctorofficial y me hace ver que estoy regando mal... He dejado que se seque demasiado el sustrato! (como en la fase vegetativa) Y la Gorilla Cookies FF al ser la planta más grande y que más agua pide, está demasiado sedienta... Voy a modificar los patrones de riego para que el problema no persista en Gorilla Cookies FF ni aparezca en las otras plantas! Riego 0,5 Litro H20 sin nutrientes. TDS 225 PPMs - pH 6,6 Día 71 (27/03) Riego 1,25 Litro H20 + Wholly Base 3 ml/l + Solid Green 1,75 ml/l + Early Flower 0,75 ml/l + Big Bloom 1,5 ml/l de Gen1:11 TDS 1150 PPMs - pH 6,2 Día 72 (28/03) La necrosis en Gorilla Cookies FF se ha detenido 😁 y las flores siguen creciendo Observa alguna mancha de necrosis también en Wedding Cheesecake FF y decido a subir un poco la lámpara Ahora el PPFD en apical es de unos 830 PPFD Día 73 (29/03) Riego 0,5 Litro H20 sin nutrientes. TDS 225 PPMs - pH 6,6 Día 74 (30/03) Riego 1,25 Litro H20 + Wholly Base 3 ml/l + Solid Green 1,75 ml/l + Early Flower 0,75 ml/l + Big Bloom 1,5 ml/l de Gen1:11 TDS 1150 PPMs - pH 6,2 Día 75 (31/03) Detecto una ligera necrosis en Purple Lemonade FF y en Wedding Cheesecake FF. Voy a aumentar un poco la distancia de la lámpara para tener un DLI de 37, por si fuese estrés por luz. 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae 🎚️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1
Likes
4
Share
Learned a lot from this grow and am very happy with the results. Pulled 2.8 Oz and 1.1 Oz of trim/popcorn buds in a one gallon pot. Definitely wont be doing that again, but had a lot of fun throughout the entire process. Going to be starting another grow soon! Very excited for that.
Likes
21
Share
@Whitebelt
Follow
Beginning week 9 Plans this week: Make a long time lapse while away this weekend - post more photos too Lollipop Tuck and tie a bit Possibly build a second scrog level?? Thoughts anyone?? Research and purchase or build a “grow room controller” - tent: temp, rh, light(?), co2(?) — rez: ph, ec, temp, water level - maybe more stuff like tie in the cameras, also basement temp and rh, fan and lights and pump contro. Nutrient dosing and ph control would be awesome but likely too pricey— but I’m a geek and this will be fun! I’d prefer a prebuilt system but I’m not totally opposed to building an Arduino/pi style solution (reliability and time to get it right are concerns tho - plus I have an arcade cabinet project I’d like to get to soon) — **ANY THOUGHTS OR ADVICE ANYONE??? To do list: I picked up some angle aluminum and I plan to finally make a single frame for the numerous LED lights Mount things to the wall (temp and humidity sensors, timers, utility light, etc) General cleanup and house keeping - wire management etc Install new portable air conditioner in the basement - this will be a bit of a project - casement windows and other issues Hopefully this week: install a utility sink in the basement and tie into the water lines and waste lines of the house (no more carrying water and waste upstairs!!)
Likes
11
Share
My suspicions of some kind of infection with the plant on the right was confirmed this week and I learned a new word "fasciation"...it's all over the internet but i've never heard of this before now...the plant continues to look worse and worse no matter what i do, a few of the older clones are starting to do the same thing so i threw them all out...The plant on the left looks on track with maybe 2 1/2 weeks to go..
Likes
4
Share
What can I say mimosa cake auto stole my heart truly an amazing plant gave me a run for my money trying to get the environment down in and give her what she wants but towards the end I got her figured out and she became one of the most dense Bud got on a plant cannot wait for my next run with her now I know what she needs and what she doesn’t like🔥💯🍻
Likes
15
Share
@SamDo
Follow
Hello, nouvelle session, et 1ere expérience cette fois ci en coco. Avec une nouvelle gamme d’engrais de chez Canna, ainsi que le substrat en coco de chez Canna aussi J’ai constaté que les graines de Quick Critical+ ont germées très vite par rapport à la terre, ici, à peine 72h pour les 1ères. Et un joli 100% pour la germination!! Merci dinafem!👍🔥 J’ai pu aussi constaté que le réglage du PH et de l’Ec prennent ici toute leur importance,, puisque pour mes 1er arrosages j’ai oublié de contrôler l’Ec, résultat, légère brûlure sur le bout des 1ères feuilles,, j’ai immédiatement corrigé en contrôlant et en ajustant l’Ec,, les choses devraient rentrer dans l’ordre maintenant. Voilà pour cette 1ere semaine de découverte de la culture en coco,,, A la semaine prochaine... Happy grow...😎
Likes
12
Share
@Arcadium
Follow
Smooth sailing this week, caterpillars have slowed, they will burrow into the soil to pupate from now until first frost. Next year I'm going to put bands of sticky tangle foot around the cherry tree in Oct, canker moths will emerge in Nov and have no luck getting back into that tree to lay eggs for next year. Top dress of a couple cups of home made compost with 20tbps of Gaia Green AP/PB, 70/30, 10tbps for smaller airpot. Fungus gnatts are always annoying in my smaller pots. Airpots make it fun because now they go in the sides, trying shade cloth which I normally use anyways around the pot. Did some super cropping of the small plant as well, looking good, no signs of flower yet, but I'm sure the pots maxed soon so we'll see. Witnessed the brood of Chickadees in my nest box take first flight, what a sight. Now I have a family of 7 eating those damn caterpillars. Half dose of silica / diablo maxx, and some drip, weekly LCPT spray and that's a wrap.
Likes
44
Share
@UKauto
Follow
Last week for her now. Had her last feed other day and starting her flush tomorrow. She's put a bit of weight on like and stinking more and more 👌🏻 Looking like a lush fade coming in over this last week too. Next entry will be the harvest ✌️🏻
Likes
3
Share
Now it needs to dry and then i can test trim leawes and take weight before cure. hang dry in the middle of dark 60x60 tent w/semi good airflow. around 60% hum. After 4 days of hang drying nugs are feeling dry but stems are not yet snapping. Allmost ready for trim and cure. hum. has dropped to 55% Day 6 of drying desided to chop away the stems and branches to get the flowers sealed in bonnebag. timelapse of the trim added to gallery.
Likes
99
Share