Likes
Comments
Share
The buds continue to get fatter everyday. They look very sticky as well. This really is a fun grow so far and the buds smell wonderful just wonderful Wow!!
Likes
2
Share
Holy Lst. Getting crazy now for just a few weeks from seed. No stopping it now.
Likes
3
Share
@RatmanJR
Follow
December 7th. 68 days post flip Chopped the two remaining purple marmalades today. They still had some white pistals but the Trichomes do not lie. I am really happy with them and they smell amazing. They will dry at 65 degrees and 58% humidity for 10 days and than go into grove bags. Will drop an update on their differences before they go into cure. Will give them an early smoke test. Number 2 smells the most but number 3 is the frostier of the two. The two clones also continue on healthy. I’ll know when I test these girls if I’ll be making use of these clones. Harvest week coming soon As always guys thank you so much for following along and god bless !
Likes
12
Share
Ghost Train Haze Week 6 from seed | 12/12 from seed Marked as: Week 1 Flower (pre-flower transition) Before jumping into current conditions, a quick recap for anyone new joining the diary. This Ghost Train has been through a bit of a transition phase over the past weeks. Earlier environmental fluctuations, combined with changes in nutrition and irrigation style (Autopots), slowed her down compared to the rest of the room. Nothing dramatic, but enough to leave visible signals on the older leaves. The good news: conditions are now much more stable, and the plant is clearly responding. ⸻ Current Environment (now stabilized) • Temperature: ~27.5 °C • Humidity: ~65% • CO₂: ~900 ppm • PPFD: • Smaller plants: ~600–700 • Taller plants: up to ~800–850 Light intensity is intentionally staggered. Plants are allowed to grow into the photons naturally, rather than being forced under a flat PPFD across the canopy. This helps accommodate different genetics and growth speeds in the same room. Despite cold weather outside, internal temperatures are now stable, which was one of the main goals this week. ⸻ Root Zone & Irrigation • Root / reservoir temperature: ~17 °C Slightly cold, acknowledged. This contributed to slower uptake earlier, especially in Autopots. Not ideal, but manageable, and already improving. • Watering parameters: • pH: 6.5 • EC: 2.4 ⸻ Nutrition — what changed and why This week marks a clear nutritional transition: • Switched from Plagron Terra Grow → Terra Bloom • Following the Plagron feeding schedule • This was the only intentional change Additionally: • CalMag Pro has now been added (started last week) About the leaf symptoms The older leaves show signs of undernutrition and stress. This is not a single-cause issue, but a combination of factors: • Cold root zone limiting uptake • Autopot system still running a lighter recipe • A sudden stop of organic inputs • A rapid switch to a fully mineral approach In short: the plant was used to one rhythm, and that rhythm changed fast. She didn’t like it — and she showed it. Important note for newer growers: 👉 These symptoms are on older leaves. They will not “repair,” but new growth is the real indicator, and that’s already improving. By increasing Terra Bloom, adding CalMag, and stabilizing the environment, the plant now has what she needs to push into flowering properly. ⸻ Flowering expectations This Ghost Train Haze is currently the most delayed plant in the room, and that’s okay. • Haze-dominant genetics often: • Take longer to transition • Stretch later • Flower later than hybrids She will likely be: • The last to fully enter flower • The last to finish That’s normal — and usually rewarded with excellent medicine in the end. What to expect next: • Gradual improvement in new growth color • Clear pre-flower expression • Stretch beginning once roots and uptake fully sync What not to expect: • Instant cosmetic recovery on old leaves • Overnight flowering just because the schedule says so ⸻ Final thoughts Conditions are now stable, inputs are clear, and the plant is responding. From here, it’s about consistency, not correction. Thank you to: • The newcomers • The OGs • The supporters and the critics • The sponsors • The community • The platform itself It’s truly an honor and a privilege to share these humble diaries with everyone who chooses to follow along. We move forward 🌱 Week 6 from seed. Week 1 flower — let’s go. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it.GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
22
Share
@Slobasian
Follow
Overall diesel smell great frost beautiful waiting on one more of this strain looks like some indoor gas super excited some of the best outdoors I’ve had yet
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......
Likes
9
Share
Ahoj všem, roste krásně a myslím že bude i krásná sklizeň. Ještě nikdy jsem neměl gen co by takhle sladce voněl.❤️🥦👌
Likes
14
Share
COMING SOON!!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
4
Share
@cwgrows
Follow
After finding a couple of unseen spots of mold while chopping I meticulously went through every single crevice of each nug from both plants and removed the few spots I found, this took about 10 hours straight (not including light trim and wash). Absolutely stoked with the results of this grow and so proud to have gotten both these girls all the way to the finish line!
Likes
21
Share
@GRow_M8s
Follow
* All good this week, pistils coming out, smells too,humidifier brings down humidity at 45%. * A 1st defoliation-clean up, down side mainly and the next one in 7-10 days on the main canopy. * Gemma crystalize NPK every 7-10 days. * 💧 Crucial to Keep moisture in soil cause Gemma crystalize nuts are too strong, if soil drys we have to water with tap water before feeding. All the others products are in every watering. 🍼 1000ppm when feeding nuts. ☆ Photos are right after defol and lst under net.
Likes
18
Share
@Ironblimp
Follow
For this week, plants are still looking healthy, followed the usual regime of normal water and nutrient feed pattern. I didn't fill the need to defoliate, so I mostly did some leaf tucking. At his stage, the two plants have filled up the box, and they still have room to grow horizontally, so a note to self to flower 2 clones a week early next grow.
Likes
9
Share
Buds are dense..let's see how she weigh after drying
Likes
10
Share
@MG2009
Follow
12/23/2020 Coming into week #5 flower will add overdrive this and next week. Should be bulking up soon I'm still resistant to defoliating but I must clean up some older leaves. 05/27/2020 Finally got to defoliating a little today buds everywhere! Holy crap! Gave her some overdrive in her reservoir bucket swap, also next week I believe.
Processing
Likes
13
Share
@MG2009
Follow
Flushing begins week#8. Water only now, looking for the fade. Will veg longer next time and defoliate. Last pic is a leaf I took of it has 2 calxys on its stem. Next run with 2 plants in this tent should be good. ( plenty of room ) I think the curling up of leave's from low humidity? 48% because I feared getting mould, any thoughts? 02/04/2018 Lost power for about 30 hrs, she has been in the dark with no aeration. Hope she did well update tonight,
Likes
16
Share
Dam we got some frosty ladies developing here! Crazy sweet, jelly berry candy aromas busting out the tent. Had to lower the one light because of issue with power setting. The canopy is a bit of mess, but its expected when growing 7 different phenos. The plants also couldve gone into flower about week earlier. We just installed UVB bulbs for the last weeks, cannot wait to see what that does! Happy days, check yall next week.
Processing
Likes
11
Share
@Ecogeek
Follow
Starting running into problem with gnats during flowering but I've adjust the fans and temperature increased to calm the precipitation in the tent. The 3 seeds I germ'd & planted in 1pot that mistake cost me 2 well rooted ladies leaving me 2:6 (2Ws 4Ls) of successful STILL growing plants. All in all I'm getting good with this. Tweeking and creating self methods learning frm this community have turn'd me good looking & promising yields.
Likes
7
Share
@InsideAz
Follow
Make sure to check out the videos! Not much growin on this week just watering and letting them grow. No smell yet Increasing light to 80% Nutrients in previous week and next week Sunday morning video 10/6
Processing
Likes
1
Share
So This week was the same as the last really, It seems all I have to do is sit back and watch these ladies do their thing! Ive not gone full on with the bloom supplements or PK yet as only 2/5 of the GG are seriously flowering. The other 3/5 GG are now Finally showing some signs of flower and some tops are starting to build and lowers producing more pistils each day! The Stardawgs continue to explode, even some friends who were sceptical about the performance of the Quantum board LED's have been flow away by the results. All of the buds seem to be building dramatically top to bottom which no shortage of frost! Macro shots on the way!!
Likes
3
Share
@PapaTerps
Follow
Glue31 - Compound Genetics Day 19 - watered with 0.5L of water with defined nutrients, mixed in order and then pH'd to 6.3... She is growing vigorously and is already the same hight as the other plants in the tent! I removed one fan leaf to improve light, but other than that, I'm just letting her grow 🙏🏻