Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
@DBoogie
Follow
What's up Dream Team! Coming into week 3 feeling strong. Trying my best to not over water. If you guys have any watering techniques can you please share.
Likes
55
Share
@Xpie77
Follow
Day 18 of flowering! 💚Please Like This Diary and Leave a Comment!💚 This week the flowers start to swell up. The smell is very nice and love this strain to grow🌿💚🍀 Nutrition: not so much, just a quarter of what is asked on the bottle. Smell: plant already have a nice smell, very punchy, skunky, forest fruits Health: nice strong plants, will grow big and flower fast! Red Wine was created by crossing Rozay F2 with Jet A. They are 2 very powerful aromatic Cali hybrids. This exclusive new Cali strain is a very strong and fast flowering indica-dominant strain. It has an aromatic, intoxicating and relaxing effect. That is comparable to enjoying a good glass of wine. Red Wine has an average flowering time of about 7-8 weeks when grown indoors. Outdoors it is ready fairly early, usually around the end of September. The yield is very good. Indoors she has an average yield of 450-650 gr/m². When growing outdoors, 600-800 grams can easily be achieved per plant. Red Wine has an aromatic scent that can be compared to a full red wine. Her full, purple-green buds are very compact with few leaves. This is very convenient when cutting the plants and saves a lot of time. Smoking this weed gives you a nice high with relaxing properties. The taste of Red Wine is very fruity sweet with an aroma of red grapes. Flowering time: 7 – 8 weeks Genetics: Rozay F2 x Jet A 30% Sativa, 70% Indica Plant height outside: 100 – 180 cm Outdoor harvest month: from June to October Yield indoors: 450 – 650 gr/m² Yield outdoors: 200 – 800 gr / plant THC: 25% 💚💚Wanna Try Red Wine from Seeds Genetics💚💚 Link: https://seedsgenetics.nl/product/red-wine-gefeminiseerd/
Likes
3
Share
Aquí está la pequeña banana tirando como puede de manera que pelea por el espacio de iluminación contra las amnesia. Una locura este híbrido entre tantas sativas! E de decir que me gusta 😊 Seguimos subiendo poco a poco la ec este riego en el día de hoy 30/3/26 le e metido un pequeño chute de 70l con un ph6,4 Estamos alimentando a la pequeña con 1800ec Y parece aceptarlos bastante bien!!
Processing
Likes
30
Share
THURSDAY 12/20: Beatrice is still packing on the pistils, but it's a race between her buds finishing and all her leaves all falling off. I watered her today with just bembe, calimagic, bud candy, and terpinator. I'll give her Cha Ching in a couple days..and maybe again once before I start flushing her. FRIDAY: The new evaporative cooler is working pretty well in the tent. High temp was 84f with it running on medium and with ice in the reservoir. That's a win. I suspect that when I need to run the other two 85w bar lights it will be pushing 90f again unless I run it on high. RH is is staying between 38% and 45%, which is another win! SATURDAY: I fed her about a gallon of full-strength bloom nutes and extra bembe/terpinator and cha ching. SUNDAY: Photo session! She's getting closer now...I may start flushing her on next water day.😋
Likes
32
Share
@BigDaddyK
Follow
one is flushing, the otehr ill start next week Starting the flush with DragonForce Sunday 5/1/20
Likes
8
Share
Aquí tenemos el cultivo de la cepa ansiada desde hace ya un par de años de la cual me he enamorado. Para mi, una de las mejores que he probado. El cuarto de cultivo trabaja por norma general con un foco 600w de sodio y unos led COB 50w cada uno de apoyo exclusivamente cuando tengo buena producción solar (por donde vivo suele ser lo habitual). Sistema de cultivo Dutch Pot Hydro. Riego 15 minutos on 15 minutos off (luz on) 15 on 45 off (luz off) El cuarto cuenta con una buena equipacion para tener todos los parámetros optimizados. control del clima y control del agua. Biofiltro y bomba de aire en el tanque. Notas: Esquejes prematuros con poca raiz EC demasiado alta 1.5 n/S por no tener la arlita lo suficiente lavada. Ph con mucha correccion (Ph-) para estabilizar en 6.3 Aplicación foliar aceite de neem el 22/05
Likes
43
Share
~Entry for the 'Best Rarest & Smallest Pot by Seedsman' contest~ Starring 🤩.... ~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 1/24- Well, here we go into the Seedsman Zkittlez Auto's 9th week of flower which will be her last! This fine looking lady has been growing for 80 days since she broke ground and has turned out simply AMAZING! 🤩❤️ I'm flushing every day now with well water that's ph'd to 6.5-6.7 @ 71℉ until I have good runoff and that's exactly what I did today in addition to giving her pot a 1/4 turn. 1/26- Today I flushed the Zkittlez Auto for the last time and I'm going to put her in the dark for 72 hours today after checking her trichomes one last time. 1/30- Yesterday the Seedsman Zkittlez Auto was released from 'Dark Jail' and looked absolutely amazing, covered in frost and sporting some gorgeous coloration on her flowers! After snapping some pic's I chopped and hung her to begin the drying/curing process. She's hanging in total darkness with a fan, de-humidifier and humidifier to keep the air circulating gently and the RH at 60% (I usually run the RH down to 50% for the first 24hrs, then up it to 60% for the remainder of the hanging time). The air temperature in my drying room stays a constant 53-60℉ which I find ideal for getting the drying time to the 12-14 days I like it to be to ensure a nice S L O W drying which, I've found, ensures a super delicious product after it's finished curing for 3-4 months in jars! This has been such a fun grow to participate in, and as always, I learned a few things I didn't know previously as I've always grown in much larger containers which made this grow that much more interesting to me! I hope you enjoyed following along half as much as I did growing this little gem from Seedsman Genetics, I truly appreciate all the love and positive comments that I've received throughout this run.... THANK YOU!❤️❤️❤️ See you at the Harvest! 😎🤙 ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! 💚What you grow - Grow what you💚
Likes
37
Share
@Ferenc
Follow
Last couple of days... No watering from today, (Day 129) and the light will be switched off as well from tomorrow (Day 130) so I will harvest them approx on Day 132 or 133 on the 18th week :)
Likes
14
Share
Last of the 5 Papaya Cookies still going strong.Ive given her just plain water when the pot is dry.She is still showing some signs of new growth and has more time to develop.cut the last Papaya down trichomes were cloudy. I’m going to dry her a little differently than the rest.Im going to hang in small branches on hangers as I’m trying to avoid any molding on the big center cola.Drying at 67 degree and 62 percent humidity and she smells amazing.
Likes
7
Share
@Tazard
Follow
She’s still stretching! We are at 57” and growing. I’m not sure how much more she will stretch but if she gets over 65-66” I’ll have to bend (supercrop) her over so she’s not blocking the light.
Likes
107
Share
@Natrona
Follow
Auto Purple Hulk Auto by MSNL Outside 👉Sponsored Grow👈 W11F7 8/24-30 After the hurricane, I decided to finish growing Auto Purple Hulk inside the tent. I watered twice this week, once at the beginning and today at the end. CalMag 10ml/g Green Sensation 4ml/g Recharge 2,5ml/g PPM 826, PH 6.2 temp 69.8. I brought Purple Hulk on August 19, 2 days before the hurricane. Let me warn you right here. First, do not be so anxious to grow outside. Before moving four outdoor plants into a tent, they were inspected for pests and mold, but none were observed initially. After relocation, the heat and lights in the tent created conditions for caterpillar eggs to hatch. Caterpillars began to appear gradually over several days, with 20 to 30 found during one inspection. Caterpillar coloring matches the parts of the plant they consume, making detection difficult. As a result, Purple Hulk will be harvested due to significant pest activity; trichomes are mostly milky with few amber tops. Second, it is also advised not to bring plants indoors without proper quarantine procedures, as caterpillars can migrate to neighboring plants via webs. This was observed with Tropicanna Poison XL, which was next to Purple Hulk in the tent. Finally, for plants grown outdoors at any stage, bud washing at harvest is suggested, as demonstrated in Jorge Cervantes's video: https://www.youtube.com/watch?v=kkEYz8-YeUA. The proximity of Purple Hulk to other garden vegetables such as broccoli, cauliflower, and cabbage—primary targets for white cabbage moths—may have influenced the number of eggs found. Previous outdoor growing seasons did not experience similar caterpillar issues, though bud rot has been common due to humid summers in Virginia. Auto Purple Hulk buds developed beautiful purple hues from mauve to purple. They are big, dense ands sticky. Thank you all for your continued support and encouragement. Your likes and comments motivate me to keep sharing my journey. Let’s continue to learn to grow together! Stay green, growers love 💚🌿, 💫Natrona💫
Likes
24
Share
Bueno esta genética es una maravilla, es súper fuerte no a tenido por ahora ningún tipo de carencia ni de plagas es una planta muy sana y fuerte.
Likes
307
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Let's go for the flowering, stretch Started, hope can stay under control, we can start to see the first pistils, Plant look happy. Weather start to be really cold, and worst next weeks, we'll see how turning. 💪 Keep Working on the canope, removing leaves and under buds site. 🕑 Now 12/1 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 43 cm. Mars Hydro Fan kit Setting 5 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/
Likes
34
Share
Today is day 8 of flowering. I returned yesterday from a 7-day vacation. For this reason, there are no pictures from the first week of flowering. The AutoPots did a good job, and the plants drank 25 liters of water. This week I'm using compost tea and Rootinn foliar spray (MG12).
Likes
10
Share
@Prilyfe13
Follow
11/25/2025 New week and new water. I can't figure out why my pH is so messy. Always swinging super wide. This morning for example was 4.6 pH on both plants. The mix concentration went up to 1000 ppm on both as well. The big difference I'm seeing is what's in the water. Papaya Cookies has clean nutrient water while Lemon Cherry Cookies has root debris in it. No clue why it's happening. Hell I don't even know if this is a thing. But it's happening. Hopefully with the water swap, it'll go away. Maybe I'll have to dunk the roots in a different bucket to try and clear the stuff off. It's too bad I can't bring the whole plant to the sink. Lol. I could spray the roots down. As it is, that's never gonna happen. So aside from having my cousin come over and hold the plant up while I clean out the roots, I think I'm stuck with this and have no idea what it is or how to fix it. Personally I think the roots are self pruning. Why? Maybe the concentration is too high and it's eating away at the roots. I doubt it, or it could be not enough oxygen. Don't know how to fix that. My air stone is bad ass. But it's the same air stone and setup in Papaya Cookies, but no debris or old roots. Could it be because the size of the root ball? The one in Lemon Cherry Cookies is massive while the other one is big, but not massive like this one. Could that be it? Who knows. All I know is I need to figure it out. Any ideas anyone? Other than that, it's a new week and a new bucket of water. I think I'm gonna cut the nutes back a little bit from last week. Maybe they will actually show issues if there are any. I'm only cutting back a little bit. Just the bloom nutes. Instead of 1.25 teaspoons per gallon, I'm gonna cut it back to 1 teaspoon. If it shows signs of deficiency, I'll add a little bit more. But I have a feeling they will be happier with a lighter dose. Now I can't tell when these ladies will be done. I'm saying another 2 weeks. I said the same thing last week, but I'm not so sure now. They still have tons of white pistils. Especially Lemon Cherry Cookies which is odd. That's the one who should be done first. However, Papaya Cookies has more orange pistils and denser nugs. I really hope both plants come out masterfully. And I really hope they finish at the same time. I'm using this tent for drying. I don't have space for my 2x2 anywhere. Small apartment. Anyway, so yah, drying on the 3x3. Speaking of 3x3 tents. I'm pretty sure either one of these plants would have filled this tent out. They both filled out wide and deep. Luckily they aren't too deep where I can't access the back, but one of these would have filled out the tent. Especially with the training I could have done with that much room. I think they stopped growing where they stopped because of the size of the space. I bet if they were in a 4x4, they would be much bigger. Because they grow to fit the space. Or at least that's what I'm discovering. Of course there's the one off that grows to be a beast, but that was a one time thing. And I'm pretty sure the seeding had something to do with it. Anyway, I'm getting. A 4x4 eventually and will find out if my theory is correct. At least with autoflowers, that is. Photoperiods may be a whole different story. Actually based on how they grow, it's a completely different story. We can manipulate photos in how they grow and even when they get switched to flower. It would make perfect sense that a photo grow as big as they can in in a smaller space with manipulation. Anyway, rambling over. Alright everyone. I have changed the water and this reads. 5.85 pH for both. Papaya Cookies has an EC of 1.458 and TDS 725 ppm Lemon Cherry Cookies EC 1.65 and TDS 809 ppm We'll see what it's at in the morning. Don't really know why the mix is higher in Lemon Cherry Cookies, it's still low enough though. I have a feeling I should dunk both of them in plain water just to get the rest of the debris off. And maybe some of the nutrient buildup off. At least I think that might be the problem. 11/26/2025 2 days over the deadline, but whatever. I'm gonna get some damned good bud if I can fix this issue I'm having. Specs: Papaya Cookies: EC: 1.701 TDS: 838 pH: 5.5 pHed to 5.85 2 hours ago now it's 6.1 (ummmmmm?) Lemon Cherry Cookies: EC: 1.765 TDS: 885 ppm pH: 6.1 Well that's not good. I changed out the water and cleaned the buckets out. It has to be the roots. How the hell do I clean the roots? Or well, rinse the dead stuff off? I changed the water. I made sure the water they went into was clean as well. I have questions. Questions that need answers. To the forums! Hopefully I find a solution. Good morning. Afternoon for us. Lemon Cherry Cookies: PH: 6.05 EC: 1.77 TDS: 885 After pH: 5.8 EC: 1.80 TDS: 888 Papaya Cookies: pH: 6.44 EC: 1688 TDS: 837 ppm After pH: 5.8 EC: 1.70 TDS: 848 ppm 11/27/2025 Papaya Cookies: Before: pH: 6.35 EC: 1.955 TDS: 977 ppm After: pH: 5.75 EC: 1.634 TDS: 829 Lemon Cherry Cookies: Before: pH: 6.5 EC: 1946 TDS: 967 After: pH: 5.85 EC: 1.693 TDS: 843 ppm Lost power last night while the lights were on. 11 hours of no light and now it's lights out, so another 4 hours of dark. Not too sure what I should do. Should I turn the lights on? Or should I leave them in the dark until lights on? I feel like turning the lights on now when it's not lights on time would really mess with the light schedule and possibly cause some issues. I'm gonna leave them off. As we can see above, the concentration of the mix is still rising. But the plants aren't showing any signs of real stress. Or at least stress that could be seen. Still not sure what to do. I'm hoping the top off of plain water will help. But I think I need to dunk them both in a bucket of clean water a few times to get all the excess salts off the roots. That's what I think is causing the problem. The roots somehow have buildup in them and it's releasing it in the water. Or something like that. Maybe? I dunno. I think I figured out the debris in the buckets. It's from handling the roots when I remove the plant for pHing. Only Lemon Cherry Cookies though, her root ball is so large I have to lift half of it out of the bucket to put it in the reserve tank. Maybe the oils on my hands are causing issues? Maybe? So the two issues combined today with the power outage and the water mix still out of whack, I'm afraid there will be some sort of stress that we can see when the lights turn on. Let's hope it's mild. The environment was also pretty bad this morning. It was 56° in the house this morning. Apparently I lost heat and power last night. So it was cold and without the fan on, it was really humid too. Like 74% humid. But I think it was cold enough for nothing to start to grow. At least that's what I hope. I might have to change Lemon Cherry Cookies water though. There's a subtle smell about the water. I might change it today. We'll see how it turns out when lights come on. If I'm having the same issue with the increased EC and TDS I'm swapping out the water. I might have to buy some hydrogaurd or something. Maybe that will help clear out whatever is going on. I was thinking peroxide, but I'd rather use things that are designed for Hydroponics. I might change Papaya Cookies water as well, there's nothing funky about it, but the concentration is still rising. I'll pump a gallon out and replace it with plain water... Again. Maybe I'm just giving them to much to start. It's about 20% lower than the regular dose. Now that I think about it, that's pretty high. And these plants aren't big. Maybe I still need to drop the bloom down. Maybe the boost as well? I dunno. I'm gonna drop the Bloom nutes to 0.75 teaspoons per gallon. Should be 3 teaspoons for the 4 gallons of water. Let's see if I can get it to drop below 800 ppm and stays under there. 11/28/2025 AM readings. Papaya Cookies: Before: pH: 4.9 EC: 1.857 TDS: 945 ppm After: pH: 5.8 EC: 1.816 TDS: 934 ppm Lemon Cherry Cookies: Before: pH: 6.35 EC: 1.865 TDS: 934 After: Didn't do anything. Will top off with pHed water this afternoon. I want to see if they will do their thing with the higher concentration. Still, I know it's not good, but I really don't want to keep pulling Lemon Cherry Cookies out and mess up the roots. Btw, I've decided the issue with the debris in the water is because of me handling the roots when I pull the plant out of the bucket. I have to left about 2/3 of the roots by hand. So if I leave it alone in the bucket, and pH with top offs, I should be fine for the rest of the week. If the mix reads any higher, this afternoon, after lights out, I'll pull a gallon and replace it. But that means I have to handle the roots. I guess we'll see. 11/29/2025 I forgot to record today's measurements before I adjusted. Papaya Cookies had plummeted pH. 4.6. the EC and TDS were actually not too far off. Lemon Cherry Cookies on the other hand swung super high, guzzled a ton of water and spiked both the EC and TDS. We are talking a TDS of 1200. How?! I dumped a gallon of plain water in. It fixed it for the most part. This thing is taking in like zero nutrients. I've been advised that the issue with the pH swing is probably the size of the roots compared to the bucket. They said it is most likely shedding roots due to the size. I assumed that is based on a ratio. Ok, done. Lights turned off before I could get to Lemon Cherry Cookies. However I did dump the gallon of water in. Should be fine. 3 more days and we can change out the water and do a much lighter dose. Here's the afternoon specs. Lemon Cherry Cookies: pH: 6.5 (high) EC: 1.794 TDS: 882 ppm. Papaya Cookies: pH: 6.3? (Apparently I did not do my measurements right.) EC: 1.644 TDS: 820 ppm So that was just after lights out. So I couldn't take them out and adjust the pH again. But, Papaya Cookies keeps crashing, so this should at least get through all the nutrients she needs. Lemon Cherry Cookies on the other hand has been swinging up. With her pH up at 6.5, it's gonna spike even more. Maybe not though. I did add that gallon of plain pHed water. I need a bigger bucket. Lol. Anyway, the environment has been pretty good these past few days. Very happy with that. I've been following the VPD for the most part. So far it's right on the money beteeen 1.49 kPa and 1.59 kPa. While lights out hangs out around 1.30 kPa. Temp is 68° and humidity is 44% for a perfect environment. Day temp is 75° and the humidity at 45%. 11/30/2025 Morning Readings: Papaya Cookies: pH: 4.68 EC: 1746 TDS: 866 Lemon Cherry Cookies: pH: 6.49 EC: 1904 TDS: 950 Adjusted: Papaya Cookies: pH: 5.6 EC: 1519 TDS: 760 Lemon Cherry Cookies: pH: 6.2 EC: 1753 TDS: 876 So let me explain the way I did things today. Plain water for each. I left the water completely alone for Papaya Cookies and added that with its pH of 8.0. That mixed in pretty nicely. Not good enough, but close. After lights out, I'll probably pull both plants and pH them properly. But I'm trying to avoid lifting, moving or agitating the roots of both plants in any way. Obviously I'll have to pH properly at some point today or tomorrow. 12/01/2025 Measurements this morning were off. This time though, Lemon Cherry Cookies pH swung down to 5.6. That's new. But of course her EC and TDS were high again. So still not taking in nutrients. But she drank a gallon of water. Something is going on. I only lifted her a little bit to see where the air stone was. Papaya Cookies had a super low pH as per usual. Which is really bad. Her leaves are starting to show signs of serious deficiency or pH damage. I don't know the difference yet. But I do know there's definitely an issue. Anyway, her EC and TDS weren't that far off. So I dumped half a gallon of pH rich water to bring the lower pH mix up. Spot on at 5.8. it also lowered the EC and TDS. Not much though. Unfortunately, my water pump is too big for the access panel. I need to get a smaller one. Then I could pump the water out, pH and pump it back in. Oh well. Next time. Environment is good.
Likes
22
Share
8/19/23 - Day 67 - Things are still looking good. We just had a water change. A couple more weeks! 8/21/23 - OK, ok ok, we have a lot of work coming up. Right now is like the calm before the storm. The storm I'm talking about is harvest, trimming, drying, and curing. This is the kind of labor that you LOVE to HATE. Especially with how many buds ill be pulling from this LEAF box. Let's talk about progress real fast. She is getting bulkier every day. Overnight she drank about 300+ ppm of nutes. She likes the nutes a lot. I'm taking this as a reason for all the little snowy crystals and the enlargement of the buds. Flushing: For about a week before harvest I will empty the water+Nutes and refill only with Water. We want the plant to suck up and replace all the nutes in the buds with water. This is called flushing. Trimming plans and Tools: When it's time to trim the plant, I've got a plan in mind. I'm going to trim the buds while they're still wet, and I'll leave them attached to the stems. To simplify the drying process, I will split the LEAF into two parts – the top and the bottom. Since space is a bit tight in the LEAF with this grow, I will keep just the buds on the branches. This will help the air circulate the buds better. I've even found this cool trimming tray on Amazon that I'm planning to use. I've realized that having the right tools for trimming is essential. Just like I'd put on gloves to work on a car, I will use nitrile gloves to keep things clean while trimming. And I'll use proper trimming scissors instead of regular ones. These scissors are designed for this job and should make the process much smoother. Amazon - Trimming Tray - (somewherr brand pictured above) Amazon - Nitrile Gloves Amazon - Trimming Scissors Drying Plans and Tools: Once I'm done trimming, it's time to dry the buds. I'm thinking of using simple tension rods, like those small shower curtain rods, to hang the branches. This way, I can create two levels inside the drying box. The lower part can rest on a SCROG net to ensure good airflow and even drying for all the branches. The LEAF box will handle the drying parameters. The environment inside the LEAF box will focus only on keeping the humidity at 60% and moving the air around getting the buds to a non-mildew amount of humidity. Amazon - Tension rods 16-28” Curing Plans and Tools After the buds are dry (60% humidity), the next step is curing. This means I'll be storing the buds in sealed glass jars. I've got mason jars and hygrometers to monitor humidity levels. Once the jars are filled with buds, I'll seal them and put them in an cool, dark spot. I plan to open the jars briefly every day to let in some fresh air. (15min). I'll know the curing is done when the humidity inside the jars stays around 62% during these "burps." That's when my perfectly cured buds will be ready to enjoy! Amazon - Hygrometer 12 Pack Target - 32oz Ball Mason Jars 12 Pack I use a smell-proof duffle bag. It has double zippers, and smell prof lining. The brand is www.420stock.com, and the model I use is the X-Large Trap Pax Duffle Bag. 8/23/23 - 20% more nutrients were added. She went from about 900 at the beginning of the week to about 330. Now she's back up to 500ppms. We change the water in one more day. 8/24/23 - Day 72 - It's official: I have moved the smell slider up! Holy shit, does it smell potent. I put my arm in there through the Weed forest, and when my arms came out, I was attacked by the Skunk BOSS. I had to shower and change my outfit to eliminate the smell. If you are looking for this experience, check out https://www.getleaf.co/
Likes
21
Share
Welcome growfessors to another episode of growfessor theatre! Week 2 begins in the 4x4 tent for these 4 ladies. The grow medium is still damp and heavy, so no feed yet this week. I will wait a few more days before feeding. Ladies look happy and healthy under the Mars-Hydro TSW2000 light. Thanks for stopping by growfessors, tune in next week for another episode 👽🌳💚
Likes
5
Share
@sinfantas
Follow
Lindo crecimiento 3 semana de floracion debo comentar que tienen muy poco olor creo que se fue perdiendo porque estoy seguro en la semana 5 vegetacion era un olor muy fuerte no se si es uno de los fertilizantes que bajo el olor comienzo a usar PK de B.A.C