This week we haven't really experience anything too crazy, plant C had a little underwatering issue she got thirsty started to look pretty weak the 1st day of week 6 (for her only) she had recovered by the end of day 1 before going into the dark cycle. As the week progresses we should see some more tricome production and some more development of the bud sites. I'm hoping the underwatering that happened won't stunt or hurt the end yield too bad, that was a bad moment of laziness... whoops. Overall I haven't had any problems yet with pests there's been a lot of gnats and spiders on the outside of the tent but nothing on the inside. For a cheap tent it's working awesome. It does have some light leakaround the zippers but this isn't a problem for me as I'm growing in a darker area already. But if this were in a bright room all the time this tent would be a bad choice. Now as week 7 progresses we'll start seeing more rapid Bud development and see some increased tricome production. To think this girl (plant A) is just barely over halfway done is crazy. I have ended up removing the entire bottom 1/3 of the plant in the form of defoliation of the yellowed and dying leaves. People say don't defoliate Autos for shock reasons I hope it doesn't really matter.

8/22/2021 - Did some mid-flower defoliation to increase airflow and to prevent mold and mildew. - Split the top right main from trying to train her down and spread out the canopy, supporting with tape and twist ties. 8/23/2021 - Top right main is still vigorous after split.

Missing some inlay bug nets, could be more stable.

Привет друзьям со всех уголков мира. Вот прошла ещё одна неделя. Как вы знаете в начале прошлой недели я начал делать клонов для большого проекта. На протяжение всего времени одно растение показывало больший рост чем другое, но это не мешало мне получать клонов от двух растений. Поэтому на протяжение всей недели я продолжал клонировать растения. После того как я взял нужное количество клонов я обрезал центральный стебель, сломав привычку растения выращивать один центральный стебель. На одном растение я оставил две ветки, а на другом, то что поменьше, оставил три ветки, натянув их нитью чтоб улучшалась их мускулатура. Теперь я оставлю растения в покое, дав им отрастить немного свои ветви. Если вам интересно следить за приключениями травки в России, подписывайтесь на мои дневники!

4/20 AM all the photos are looking good. The Tyson’s are done. 👍👍👍🍇⛽️ 4/21 4:30AM Took small samples of BTT!!! Smoking now. Heavy hitter right off the tree. she is looking already done Grimm Seeds finish fast once flowering. Wasnt expecting that! I will grow some more and veg longer. I am RE-vegging. Ricky and Bubbles they are almost a year old and I want to keep thiem. Julian can go fu...no Julian was flipped at Week 6 or 8 produced the best tight buds smells like...'tangerines. 4/21 5:04AM VIDEOS 2 MONTEL'S, THE TALL ONE AND 1 TYSON, PUNCH PIE & GELATO 44!!!! 4/21 FLUSHED THE TYSONS WITH JUST WATER AGAIN AND WOW!!!!! LOVE THE RQS TYSON PHOTO PLANTS!!!! THEY ARE STRONG THEY CAN GROW UNDER HIGH STRESS CONDITIONS. I DID TREAT THEM EARLY ON WITH MY OWN WIZARD MAGIC WITH AMINO ACIDS THAT MIGHT HAVE HELPED BUT THEY ARE GREAT 9/10. 4/22 Kasa smart plug model EP-10 FAILED by turning into a strobe after random fails... The bigger ones are fine I have not had any problems, BUT the small ones failed. Thankfully I had them on my internet and not in the grow room!!! Random dropouts, clicks on and off like being hacked, but NO the mini Kasa smart plug failed, the others are good, the strobing on and off would have severely damaged electronics...I did NOT know that could happen! THE MORE YOU KNOW! 4/23 11AM CHOP DAY BOTH Tysons came down. They were ready a while ago. They did GREAT. Underfilled 2 gallon pots. Low light using 2 TS-100-'s at about 50 to 60 Watts. No idea how m;uch i got 4/24 3:20AM Tysons are drying perfectly, great color!!!! Video with Pink Kush and CBG by Seedsman in there

.

I wish I could figure out why I don't have more trichomes this is supposed to be Gorilla Glue supposed to be covered by now as far as I know anybody got any thoughts on this

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Day 96, 15th of December 2020: Hi! A bit late I was on holiday I usually start the week with the first day but now with the last one. I just put a stick there was not necessarily but looks better with it... She is a haevy yielder girl.... the buds are thick so thick I am amazed.... This genetics is amazing as well.... All the structure is pretty much cool she is outstanding quality lady.... Solid... just grows nicely a bit strechy but nothing serious.... Almost done by Christmas she is. By the way I am going on holiday again and back on 28th of December so after harvest starts. She needs more time from now but it would not be an issue to be cut if needed. The 7th weeks starts with tomorrow 16th of December.... Only flushing and no more nutritient will be used. Soon full report comes. Lamp is the same 11 hours on and 13 off.... The last 4 days she will get 4 days darkness and only ventilation will be working no even more water ;)

First week of flower is over and the stretch is on. Already started crushing and bending some branches on the taller plants to keep them as short as possible. They are really starting to fill out and the sour sorbet was fast to start popping pistils. I started some defoliation and cleaned up a few of the bottom branches. They need some more work over the next few days. I started them on a little maxibloom. I will increase it as I lower the maxigro over the next couple weeks. No water change this week and the ph is holding steady with no adjustments. Nutrients pumping 24 hours a day. Should see some nice fuzzy tops developing by the end of next week. I got some clones rooting from all but the twisted helix. They will be getting dusted with sugar cane pollen.

Still doing foliar: Cal-Mag Terra Aquatica, Pro Bloom, and silicate from T.A. some plants are removed because of root root. naw left with 19/24 plants. I also use a mobile app to set the light intensity, and I burned the leaves later. Which gave me the knowledge that the application is not very accurate.

Welcome to week 25 of my bubba slush diary Genetics by Greenhouse seed co. Welcome to my 2nd diary within diary. The first diary is already harvested. The second one has been in veg for about 20 weeks, while it was in veg, i trained it with lst and hst, now we are a in flowering for a couple of weeks. Third diary will come within this diary too, i took a monstercrop clone, it's revegging now, curious of the outcome, since this strain already has tight internodes on the branches. Buds packing, smell is dank This week again some green sensation And ghe (terra aquatica) pro bloom. Also added some new pictures of the revegging monstercrop clone. No weird deformation in leaves, so.e yellowing leaves showing, that means that another bunch of roots have been settled.

01/17/2026 No changes to nutrients today. However, from last week to this week, the EC and TDS have increased. I'm guessing the nutrients from the hydroton are leeching in to the bucket. Probably a good thing. That way I don't need to make any adjustments right now. No roots today. Oh well. Not too sure how she's doing. She has the right amount of nodes, but she isn't really growing. Still 2" tall. I know she's still working those roots, but still I should at least see a root. Just 1. But I see nothing. I increased the light intensity to level 2. See readings below. So far she seems to be happy with it. It's been a couple hours and I'm not seeing any signs of stress. Still very green and pretty sturdy. If I'm guessing right, I don't think this little lady is going to get very big. I can just tell. But we'll have to see now. I hope I'm wrong. This is one of my absolute favorites and my first time growing it. I'd love to see a nice plant with long colas thick with trichomes. But we'll see. Weekly Readings: Water Readings: pH: 6.3 EC: 1012 TDS: 500 Temp: 70° Lighting: DLI: 21.6 PPFD: 318 Environment: Temp: 75° RH: 62% VPD: 1.07 kPa CO2: 754 01/18/2026 We have a root! Just 1 root. Lol, but it's a root! I knew we'd see roots before the Apple Strudel I'm also running. It keeps stretching. So it wasn't focusing on the roots. This little lady, on the other hand, barely stretched. I was concerned at first, but now it's fine. She'll start to grow significantly soon enough. Probably tomorrow we'll see some impressive growth. Or well the start of it. However, her leaves are kinda crinkly. I need to figure this out. Is the light too bright?! No way. No fucking way. The DLI is like 21 mol. And was 16.7 mol. last week. I'm pretty sure this strain likes light. Imma take a peeky peek... Says nothing about lighting. But it does like nutrients and lots of them. I'll have to keep that in mind. Maybe I don't have enough in there. That could be the cause of the deformed leaves. I'm going to find out somehow. I looked it up and I have it narrowed down to lighting or Nutrients. It's really hard to tell when she just started to veg. I honestly should have left it in Germination for last week and started veg this week. Now it's all messed up. Lol. Oh well. So we'll have a 5 week veg stage. But it's still not gonna change the growth cycle. Also, the pH was high. It was at 6.6. So that is now pHed down to 5.8. EC and TDS didn't change at all. Temp was 67° after replacing the ice bottles. 01/19/2026 I think I figured out the issue with the crinkling leaves. The fans at night were blowing at level 6 which is really windy in a 3x3 with 2 fans. Now it's down to level 2 like it should be. Oops. On a better note, she's on her third her node now and looking like she's about to explode with growth. I'm also seeing teeny tiny side branches coming out. So I'm not seeing any issues with growth. So I guess everything is all good. Great color. Nice full leaves. Thin though. Although it is like the first week of veg. We'll see. Oh yah, the water was warm this morning. I definitely need to add ice bottles before I go to bed. No bad smell though, so that's good. Last run I got a brown algae bloom and it wreaked like warm piss. Nasty. So far everything looks good in that regard. I still need to figure out how to get temp in the tent to actually get stable. It can't hold anything. Like if the level goes below 8 on the heater, the temp drops to like 71° like immediately. I don't understand. Last run it was not like this. It hung out at a solid 75° with minimal assistance from the heater. I really don't get it. And the humidity is even worse. The humidity plummets hard. I get that it's winter and the temps are low and the humidity next to nothing, but like damn man. However, I just thought of something. I had my AC running the whole time last run. Just to keep the temp in check and the air quality better. That could have played a major role. Granted it's the exact temp in here that I was keeping it at with the AC. I dunno. Just a thought. Clean air and all. That's all for now. Update: She has 2 long roots now. Looking awesome! 01/20/2026 She's starting to grow now. The roots are getting super long and more are popping out. I have a good feeling about this. She looks great! And seems to be quite happy with the nutrient water. Very green growth. She's definitely healthy and happy. I totally forgot to change the ice bottles out again, so I did as soon as I got out of bed. Saying "shit! I forgot the damned ice bottles!" Lol. I didn't even take measurements as I was like half awake when I did it. Now I'm waiting a few hours while the ice bottles do the thing. Unfortunately, I won't be able to swap them out again until later this evening. I set a reminder on my phone, so I'll remember. As for measurements. I'm not expecting any changes just because there's 2 roots in the water. So I'm looking for the pH and temp. I'll check the EC and TDS, but I don't think those measurements are needed currently. That's more for next week when the growth becomes vigorous, or well should if not already. The lighting is perfect btw, she has a great reach and isn't stretching super fast. Very evenly paced. Slightly praying just like she should be. The environment on the other hand is a solid mess. The humidity is bouncing all over the place because of the fans. But also because I don't have the air filter in the ventilation system yet. I need to change out the charcoal or take it out, shake all the nasty stuff out and put it back in. The carbon isn't bad yet, just clogged. I need some canned air I think. I don't have an air compressor. Lol. But what I think I need to do is dump the charcoal, clean out the mesh from the filter and put the charcoal back in. Gotta wait for my new handy dandy compressed air thingy to come in. 01/21/2026 I finally remembered to switch out the ice bottles last night. The water was somewhat cool. Around 70° f. I forgot to take readings. But I'm pretty good at feeling the temp out. She looks great! Broad leaves though. The description said really thin leaves. We'll see how she turns out. It's really too early to tell what she's gonna do. So I definitely started the veg stage in the diary about a week too early. So now it's like day 3 of the veg stage in real life. We are on week 2 in the diary. SMH. Oh well. I think I addressed this when I started my second week as veg, but I can't remember. So here's a reminder I guess. The heat seems to have caught up. It's now at 75°, but not holding very well. The heater remains on and overheated for like an hour last night. Then it did it again this morning, but I just turned it off for 10 minutes while I swapped out the ice bottles and took a couple pics. Her tiny branches are starting to show more. I can't wait for them to shoot out so I can cut them off in 2 weeks. Lol. I also took a quick measurement. 3.5" tall. We started the week at 2" and have grew an inch and a half in 5 days. Not sure how much I like that. I'd love to see a half inch a day. Up until flowering. That'll give me a 17" plant by flower. If it grows twice that tall, I'll have a nice sized plant. That's based on a 4 week veg stage. If it turns out to be 5 weeks, well, the plant will be much bigger to start. Not much else to talk about today. Kinda just letting her do her thing. I've observed. She's healthy, happy and a beautiful green. 01/22/2026 We have foliage! Wow. Like overnight boom. Right on time. Now there will be some vigorous growth. What happened here? Oh I was busy. My bad everyone. 01/23/2026 The water was a bit warm this morning. I think I need to swap these bottles out every 4 to 5 hours. Not happening. I need a different solution. Maybe the heater hose needs to go somewhere else. pH: 6.1 EC: 1059 TDS: 540 Temp: 68.5 So I bought a hand held air compressor to clean the dust from the air filter. The carbon isn't spent yet, it was just clogged. Now it's unclogged. Lesson learned. Use pre-filter and replace pre-filter when it gets all clogged up. There's still a bit of resistance, but not bad. She looks great. Good color, but it looks like she'll be needing a new dose of nutrients when next week starts. I think tomorrow. Half dose and we'll see what happens. Worst case scenario, it's too hot and I have to swap out a gallon of plain water. No big deal. A gallon would put it down between the 1/4 dose and the 1/2 dose. We'll see though.

I have a new light with a bloom setting hopefully that will make a nice flowering. Got a new fan for air circulation. The new light has cooling fans. Haven't noticed any burns so im happy with my order. If you look at the last few pictures my tent is home made and cheap very cheap. The lights not an expensive one but I think its fine for now.

Last auto i'll grow , autos are actualy good for fast and not so heavy stoners , my yield is good but not the way i want it , so i'll keep improving my shit , starting with femenised seeds next run also a blueberry , first femenised im going to use , so lets hope it will have a better harvest. Overall this autoflower blueberry yielded the most of all my autoflowers , dense buds , good quality and very fruity smoke!

Se ve bastante bien la planta Creo que le esta gustando el lst... Wow En una semana creció muchísimo!!! Estoy feliz pero al mismo tiempo no tengo ni una idea de que sigue... Solo dejo a la planta crecer o sigo haciendo algunas podas... Cuando y como??? 😵‍💫😵‍💫😵‍💫 Tampoco sé si seguir amarrado es una opción.... O solo dejar que crezca y que ya comience la floración.... Aiuda

🌱 Week 3 – Gorilla Cookies Auto Pheno Hunt Another week down and the differences between the phenos are becoming more obvious every day 👀🔥 The environment stayed very stable this week with temperatures, humidity, and VPD remaining consistent. Because all plants are growing under the exact same conditions, it’s really interesting to see how differently each phenotype develops genetically. 📈 Current observations: Several phenos are already reaching close to 30 cm in height Meanwhile, some smaller phenos — especially Pheno #6 — are still around 13 cm Leaf structure and overall plant shape continue to vary a lot between phenos Growth vigor is clearly different from plant to plant now 💧 Feeding & maintenance: This week the plants received their first proper feeding with around 4 liters of nutrient water. Some phenos seem to react more sensitively to the nutrients, as a few plants are starting to show slight brown leaf tips, so I’ll keep a close eye on them over the next days 👀 I also removed more large fan leaves to improve light penetration and allow the lower branches to develop more evenly. 📊 Current environment: Temperature stable around 26°C Humidity staying between 63–65% VPD maintained around 1.3 kPa Light intensity remaining at 35% Now I’m really curious to see when the first flowering signs will appear 🌸🔥 💬 Which pheno would you pick so far?