All is currently going fine - nice small leafs showing, not thirsty, just happy.

So the plant went in flowering mid week 5 of veg, i flower her under optic phantom 1XL at 60% power (60watts) for the first 2 weeks Shes in pure coco with perlite I only water every 2 days as the pot is very heavy at this stage Final 3 pictures are day 5 Here i took off 6 big fanleaves already Start flower: march 4

she is still very happy and looks good

Had to move them from one tent to another. This is the start of week 3 of flower.

Chopped her down last week which was week 8 of flower. I hung her to let her dry for a week and then I trimmed her up yesterday and she's currently curing. Will update when cured with a final weight.

Wow impressive plant love the colors and bud structure of the plant mine came out short and bushy, drying and curing process now can't wait to sample it 🤗

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Que pasa familia, vamos con la segunda semana de vida de estas Papaya Sherbet feminizadas de fastbuds. Vamos al lío , las 3 semillas que germinaron con éxito se colocaron en macetas de 0.6 litros y asomaron 3 , 100% ratio germinado. Esta semana conforme realicé el trasplante retiraré un ejemplar que me sobra. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 18h de luz, el foco está al 75% de potencia. Hasta aquí todo, Buenos humos 💨💨💨

Die zierliche Dame mit mittlerweile gut ausgeprägten harten Blütenständen und vielversprechendem Duft kann noch eine Woche weiter reifen. Dann sollte sie laut Zamnesia, die von Saat bis Ernte 8-9 Wochen angeben, fertig sein. Die Blätter verlieren weiter an Farbe, die Buds werde dicker und der Duft nimmt zu. Mittlerweile verbringt sie auch die Nächte im Folienzelt und das hin- und her transportieren hat ein Ende.

Start of day 98 ...... January 15 2022 Start of week 14 ........ 72 DAYS INTO FLOWERING 😕 LOOKS LIKE THERE GONNA GO A LITTLE LONGER THEN EXPECTED ? 😕 Gonna be honest , I didn't expect it to go over 85 days but here we are ........ ( I BELEIVE IT HAS ALOT TO DO WITH THE SIZE OF MY GROW MEDIUM , AND THERE HEALTH AS I AM RUNNING 45 LITERS OF SOIL MEDIUM) .... SHE SEEMS TO WANNA RIPEN ON HER TERMS ( OMG THEY SMELLING GREAT ) !!!!!!! Check out the full grow video on latest weekly update Super Exceptional Growth Daily Still adjusting LST when needed and leaf tucking....... Water Only when needed but its drinking more every otherday and adjusting lights when needed...... Rain Water Only ....... ( DAY 26 AND BOTH NL 1 & NL 2 SHOWED PREFLOWERS ) ( DAY 49 AND RESIN PRODUCTION HAS STARTED ) ( DAY 57 , EQUIPMENT FAILURE , main FAN , over heated😡 tripped breaker , reset light timers , lost a DAY, REPLACED new Main Fan 😁 back up running 👌) ( DAY 70 DID ITS FINAL FLUSHING TODAY TO GET RID OF ANY BUILDUP ) ( DAY 77 AND IT SHOWS A SLIGHT DEFICIENCIE MAYBE A CAL/MAG GETTING CLOSE TO END OF LIFE ) IM ALSO DOING VERY LITTLE, SLIGHT DEFOLIATION ( DAY 101 AND ALL IS GOOD , THERE FATTING UP ) DAY 101 .....NL 1 SHOWS SOME CLEAR TO MOSTLY CLOUDY RESIN HEADS , LOOKS LIKE THERES STILL AWAY TO GO😩😩 ....... DAY 101 .....NL 2 SHOWS MOSTLY CLOUDY TO MILKY RESIN HEADS ( 💀 PROBABLY PEAK THC LEVEL 💀 ) , AMBER IS JUST GETTING STARTED , GETTING CLOSE BUT SEEMS MORE TIME NEEDED...... VERY CLOSE ( AS I WANT SOME % OF AMBER 😁 ) I hope you enjoy my growlog... (Who the hell is TropiCannibis Todd😎 Well This is not only my FIRST AUTOFLOWER but my FIRST GROW in over 11-12 Years😳 I Grew from 2002-03 TO 2010-11 , I'm back nahnahnahnahnah , Been a fun grow , learned alot , and it looks like I am gonna have a great harvest with some great smoke....... who new 😁 )

Desculpe não atualizar antes mais muito trabalho neste fim de ano adoro as cores da Red Hot tive ao total 3 Red Hot mais só fiz o diário de uma três feno tipos diferentes todos reds aromas diferentes em todos doce, pungente, frutas tropicais, owwwwww good Nice, a sweet zkitllez está muito bem também tive outras que não fiz o diário. Obrigado a todos

On day 1 week 2 flower the Gals are really stretching now, hope I have enough room 😂They seem to be taking the flower nutes well even without a transition phase 😀. On day 3 the gals have stretched so much they are within 6 in of my light hoping The stretch will slow down soon yikes 😱. I defoliated the lower and upper canopy to bring in more light and air flow. On day 6 the stretch seems to be slowing down. I increased my light intensity from 75% to 100% to see if I can halt anymore stretching. I also bent my highest colas down as they were touching the grow light 😂. On day 7 flower clusters are forming and the stretch has slowed. I will continue to bend over the tallest colas and do my best to manage the canopy without too much loss of yield. It looks like some of my colas might get light stressed/burnt. There is not much else I can do except learn from my mistakes...next time I would flip the plants earlier and give them stronger light intensity before flowering stretch. The top leaves are canoeing so I reduced light intensity back to 75% to see if they improve. I got my first clog in my blumat systems main line... I will be switching to liquid based fertilizers for the next run as I believe my fertilizer caused the clog. I released the clog by using a pipette filled with water. I took the pipette and squeezed liquid through the main line exiting my reservoir. Then the lines were running smooth 😂

Nella tenda Iniziano a sentirsi odori floreali e alcune delle signorine stanno prendendo colore sulle foglie della parte apicale 💜 Sto innaffiando le piante 🌱 a giorni alterni perché ho diverse tabelle da seguire, le Gorilla 🦍 di RQS e Zamnesia sono a circa 1.9 EC mentre quelle di Seeds Mafia a 1.8, le altre 2 di Anesia invece sono a 1.7 e andranno ad aumentare a 1.8 alla prossima settimana…cerco di cambiare ogni giorno posizione a farle girare nel box perché almeno riescono a prendere luce da tutti i lati…sono molto soddisfatto della SF2000 di Spider Farmer sta facendo un ottimo lavoro e le bollette non ne risentono come pensavo 😆 oltre che avere un ottimo spettro che aiuta le piante a essere in salute il più possibile 😎 Ci vediamo con altri aggiornamenti tra qualche giorno!

Week 2 11-14 Day 8 Water, xplant tomorrow. Grows well. I still have too much water last time. Lol like 4 days to dry. Also RH is fixed, moved the big plant to a different location. Tent is all ready for these girls! 💪🤘 11-15 Transplant day to 3 gallon. 4 tbs craft blend, 1/2 cupish worm poo, hp connect in hole. watered in 8ozish ph6.2 yucca, humic light around 280 ppfd, will move up a bit in a day or 2 to be safe. 11-16 Seems well when I woke up. 11-17 Just did some growing today. Drank a little water. Thristy probably tomorrow. 11-18 Water with cal/mag, drops of balance, yucca and recharge.

Bestva Quantum Board LM301B / Mr Hide seeds Semana de agua reposada únicamente. Están casi totalmente amarillas, lo que indica que se han lavado bien. Flores compactas, sanas, olorosas y pegajosas. Semana de cosecha 🤙🔥

So fast and so strong, really impressive! Everything is going alright here

BPW pheno 1 clone 🥇

Well, another week has passed and they are growing very well, now it's a matter of two to three weeks for me to change them to flora, this week I did a little defoliation on the plants and watered them again with top crop top veg fertilizer and I also did some bindings known as low stress training. =D