Por ser maceta de 8 litros estoy muy contento con el resultado. 49 gramos en seco de puro sabor y color.

Bueno pues el sábado 4 y el domingo 5 de marzo realice las defoliaciones y el lunes 06/03/23 puse las luces a 12/12 para inducir la floración. Las autos ya estaban en prefloración hace 1 semana. Son 12 plantas en macetas de 7L con 44 días desde que se empezaron a germinar las semillas. Uso la gama completa de nutrientes, Boom nutrients Están bajo la luz del panel LED 780W ResinX de GBLIGHTING Pretendo poner una malla de scrog y en floración avanzada otra, para sujetar todo bien.

Looks like she's completely healthy and developing well,I got scared a little bit at first due to three fact that she didn't pop after 48hs in the paper towel,but now that I see her coming up from the soil I'm much more relaxed and expecting the best from this amazing medicinal strain by Dutch passion. I Prepared the soil using bactrex, mycotrex and 2 bio tabs by bio tabs organics. Let's see how this wonderful lady performs.😍💚🌱🤞

16/03/22 Refill 4L, and add nutrients in recommended proportions (except a bit more Flora Bloom, and a bit less Flora Grow) I set the EC at 1.75 and pH was at 6. 14/03/22 I did a gentle defoliation 12/03/22 Refill 4L, and add nutrients in recommended proportions (except a bit more Flora Bloom, and a bit less Flora Grow) I'll stay at EC 1.65 this time and pH was at 6. Lately I don't have really to adjust pH, may be PH Down 1ml for 12L of bottom tank to drop 6.1 to 5.9 every 4 days.

3/4/2023 Week 3- Day 1 of Veg (Day 31 overall) Water Change out Day 36 Gallons in CalMag = .5Mil/Gal = 18Mil FloraMicro = 4.2Mil/Gal = 151Mil FloraGrow = 3.8Mil/Gal = 137Mil FloraBloom = 3.0Mil/Gal = 108Mil PH DOWN = 1.72Mil/Gal = 62Mil PPM = 546 PH = 5.88 This Grow has definitely been an interesting grow I have been playing with Over or Under since the beginning and it all started with me drowning the plants by adding too much water. I will have to make sure I watch that on all my future grows. I prayerful that this week will get me fully back on track, in my previous grows using my chart, I haven't had any issues during this week, so again prayerful that this is the week I am back on point. 3/5/2023 Week 3- Day 2 of Veg (Day 32 overall) ROOT ROT!!! I guess from when I drowned it I caused a lurking issue that really showed it's head today. The roots were looking not slightly bleached but looking black. I cut out what looked dead and I had to run to the local Hydro shop to pick up some items to see if I can fix it and strengthen the plants. I picked up Mammoth Silica, ORCA, and ROOT Drip. I completely drained the system and started it over today as well. 38 Gallons In Mammoth Silica = .5Mil/Gal = 19Mil CalMag= .5Mil/Gal = 19Mil Root Drip = 1Mil/Gal = 38Mil FloraMicro = 4.2Mil/Gal = 160Mil FloraGro = 3.8Mil/Gal = 144Mil FloraBloom = 3.0Mil/Gal = 114Mil Orca = .5Mil/Gal = 19Mil PH Down 60 Mil = PH 5.83 I also had to run by Staples I realized the paper I was using wasn't the right brightness and Lbs for the Photon App. What I needed to have 22Lbs 98 Bright. I recently saw a comparison of the different weight papers against a several hundred dollar Apage PPFD detector and with the right paper it was almost exact readings. With that my PPFD 355. 3/6/2023 Week 3- Day 3 of Veg (Day 33 overall) Still alive!! #2 and #3 are still alive and it looks like no further damage to any of the leaves. #2 needed 1 node topped. I will keep monitoring day to day. 3/7/2023 Week 3- Day 3 of Veg (Day 34 overall) Well Both appear to be doing all right. I cut off the offensive leaves from #3 nothing new on shown on the leaves. I actually needed to top 1 node on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. 3/8/2023 Week 3- Day 4 of Veg (Day 35 overall) Well Both appear to be doing all right. I actually needed to top 1 node on #3 and 2 on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. I think the additives are truly making a difference I think I will be adding them to all my grows from here on out. 3/9/2023 Week 3- Day 5 of Veg (Day 36 overall) Both still appear to be on the mend Still some dark brown on a small part of the roots and I don't know if those are just dead but it doesn't look like it is spreading and I see a bunch of new roots forming. Nothing new on the leaves at all. So I think the trio that I added is helping. The plants also seem to be in raised happy position going towards the light. I still plan to change the water on Saturday and go from there. 3/10/2023 Week 3- Day 6 of Veg (Day 37 overall) Moved the light up to 41 1/2" so 3' 4 1/2" away from the top of the Plants. PPFD= 363 Power on my Light =62.5 Water Temp is holding steady=70.3 PPM= 534 PH= 5.92 Tent Temp= 72.5 Humidity= 50-60% I have 2 humidifiers running on INK Bird controllers monitoring it 24/7. I will be changing out the water tomorrow even though I could let it go an extra week but I am still concerned that the Root Rot is clearing up and I don't want to risk it coming back. I want fresh Nutes/ water in the tanks. I topped 2 nodes on #3 I topped 3 Nodes on #2 I also cleaned out some of the bottom third portion that isn't getting much light and not much growth at all. #2: 8 1/2" tall, 18" Wide #3: 7 1/2" Tall, 15" Wide

Hey all welcome to week 7 of flower!! The lady’s are slowly gaining some thickness of there buds and just going along quiet nicely. A tad smaller buds than I had hope for but that’s just life ain’t it. We have had a quick look through the scope and think they will run for about her 2 weeks so they may fatten up a little more. Until next week happy growing 🤙🏻

I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!

Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430

Week 3! Things are moving so fast! I've had a busy week so did not get around to order nutrients. For all my worries, she seems to do just fine without them. I do not want to get over confident though. Gotta get on it! I was tempted to top her or start doing LST since she is growing so well, but decided against it because I want to let her grow naturally. This is my first grow, so best see what happens to a plant in spacebucket conditions without interference. Learn from that and experiment later on. Plus I feel that patience and restraint are key to completing a successful first grow. -On topping autos: I've read that autos should never be topped. This might have been true in the past. From what I've read new strains are more stable and can be topped without problems if the plant is growing well. (3-4 nodes by end of week 2) This allows her to recover before going into flowering. Despite her being only 10cm tall her leafs span nearly 27cm! Auto Tutankhamon is basically AK-47 (stativa) with ruderalis so I was expecting a rather tall plant. On day 16 she started showing her first pistils! 😍

this lady from the off set was the fastest growing and largest plant from the off set growing bushy with lots of leaves needing the biggest defoliation's too get that important light down too the many branches below, she is drinking about 8 pints of feed a week and loving life , and her bud production is also coming along nicely too , i cant wait too try this one ,

Well, we already know she's a grower. Check the difference in the pictures, first ones are the beginning of the week and last ones end of the week. They're definitely comfortable, I can notice the roots taking over the soil and the leaves are branching out which is great to see. Next week they'll be transplanted to final 11L fabric pots. Happy Growing!

BIG stretch this week! Might scrog these ladies as some space opens up in my tent with a harvest coming up soon.

Hello everyone Last week I cut the Gorilla Skittles after two days in the dark. I put it in the drying cabinet for two more days hanging upside down. After that I separated into branches and hung on hangers. It dried in the closet for 7-9 days when I started trimming the branches that were already ready on the seventh day. Photos, weight and more details in the harvest post. As for the wedding cake, yesterday I finished washing and put it in the dark for 40 hours. Due to extreme heat problems and my broken ac, my plants are suffering from heat and you can see the signs on them. Hope it don't do too much damage. Keep following, more details later :)

Hello Diary, The third week of flowering has ended, Cherry Pie is progressing very nicely, which is clearly visible in the photos. Cherry Pie has almost stopped growing, it has grown a scant 3 cm, which means that that is more or less the height. 72 cm is almost ideal considering the size of the grow box. The main cola rises high above the other branches, it is completely covered with flowers. As for the flowers, they are developing nicely, it is still early to make any predictions, but if it continues to develop like this, I will be very happy. Cherry Pie has also started to smell more intensely, when I open the grow box, the smell is immediately noticeable. The leaves are a healthy green color, there are no signs of a lack of anything. Watering has become more frequent, they have become much thirstier. I have continued to add CalMg and Bio Bloom Fertilizer with each watering. All in all, I am very pleased with how Cherry Pie is progressing, I try to provide them with the best possible conditions and the plants return the favor in their own way. Here is what the past week looked like. 29/08/2024 - Day 36. Watering. I prepared 9 liters of water, added CalMg and Bio Bloom Fertiliser and lowered the pH to 6.0. With that amount of water I watered all three plants on the "Farm". 01/09/2024 - Day 39. Watering. I repeated the same procedure as three days earlier. 03/09/2024 - Day 41. Watering. Same procedure. 04/09/2024 - Day 42. End of the 6th week, or the third week of flowering. Photographing and measuring the height of the plants. Cherry Pie - Day 42. - 72 cm. That's all from me, see you soon.

Day 8 - Tuesday 23/10,18 , I have added the nutrients into the Reservoir , she is making roots like you wouldn’t believe , over a foot long and branches , I will post a pic later , as I want the light off , talking of lights , the cycle is now 20/4 that’s 20 hrs of sun to 4 hrs of darkness , colour is good , leaves are quite fat . KEEP AN EYE ON PH AND EC DAILY !!! Lux @ 15,000 EC = +0.7 or 350 ppm Ph = 6.3 Day 9 - Wednesday , I checked the ph and a EC this morning , both were fine , put in about 50 ml of water , leaves getting fatter , roots are getting more dense and intricate Day 10 - Thursday , I tested the ph and EC , all was good, took a root shot for you Day 11 - Friday , tested ph and EC , all good , water level ok , ive noticed that it has actually turned around, can you see that? the leaves have turned..... from 10 to 4 to 6 oclock...!!! or am i losing it? lol..... Day 12 - Saturday , tested EC and ph , no water needed or nutes, leaves are green and getting bigger , look how compact the plants are , there is no stretching ,I have put more pebbles in to stop light leaks to the roots . Day 13 - Sunday - Checked EC and ph nothing needed Day 14 - Monday - Checked EC and ph , nothing needed , water level ok IMPORTANT 👁️ To prolong the lives of EC tester and ph tester ( digital ones ) ALWAYS WASH THEM OFF WITH CLEAN WATER AFTER EACH TEST 💯 you need to check the roots , in these pots if there is 2 in a system , they will become entangled and matted if you don’t lift them , EVERYDAY . Please note the pots are 14 cm in diameter

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.