Hello world 👋👋👋 According to our deadlines 41vege 14-12/12 4bloom The guy is actively scattering pollen, even too actively there is a fear that he will shoot back too quickly, I am trying to collect pollen. I am doing this for the first time and have tested different methods: 1) I put the bag on the branches, but condensation collects in these bags and kills this pollen, maybe I don’t understand something, I heard about this method quite often, but I still don’t understand how it works 2) I laid the sheets under the plants, the pollen does not seem to fall off as much as I would like and there is also a lot of debris left on the sheets. The method certainly works, but there are some nuances 3) For myself, I chose to collect pollen by hand from the leaves, simply brushing it directly into the storage container with a brush. Since this is my first experience, I don’t know how pollen behaves in a box and specifically in my box, so I try to apply it manually to the largest plant, in the end it will be clear whether this makes sense or whether the pollen itself gets to the flowers perfectly. One of my girls was attacked by a fan, which I turned off and fixed at the very top so that when I opened the box, it wouldn’t blow pollen out for me. As a result, it fell and broke a couple of good branches😭😭😭, now I have a wonderful bouquet of plants in my bedroom In general, I increased it to 1000, but I continue to give different doses so as not to catch salting. I also removed Plagron Green Sensation food since I ran out of it, I want to change the manufacturer. Plagron generally suits me, but why not try something new, maybe you can recommend something? Oh yes, the compote, this week it looks like this: 27/11 KalMag 5ml Ab 8ml GS4ml PB 4ml 761/6.2 2) output 848/6.4 1) without exit 29/11 KalMag 5ml ab10ml GS5ml PB 5ml 807/6.3 3) 5l 807/6.3 was not enough KalMag5ml AB12ml PB5ml 874/6.2 output 706/6.0 1)874/6.2 output 824/6.3 2)874/6.2 680/6.6 41vege 14-12/12 1coIn general, I increased it to 1000, but I continue to give different doses so as not to catch salting. I also removed Plagron Green Sensation food since I ran out of it, I want to change the manufacturer. Plagron generally suits me, but why not try something new, maybe you can recommend something? Oh yes, the compote, this week it looks like this: 27/11 KalMag 5ml Ab 8ml GS4ml PB 4ml 761/6.2 2) output 848/6.4 1) without exit 29/11 KalMag 5ml ab10ml GS5ml PB 5ml 807/6.3 3) 5l 807/6.3 was not enough KalMag5ml AB12ml PB5ml 874/6.2 output 706/6.0 1)874/6.2 output 824/6.3 2)874/6.2 680/6.6 41vege 14-12/12 1bloom 2/12 CalMag5ml AB16ml PB5ml 1038/5.9 1)Output 882/6.5 2) output 952/6.4 41vege 14-12/12 3 bloom (entire solution per 5 liters) On this note we will end our report. See you again friends❤️

Everything is going well with our big girl, switched to ph treated tap water which seems to be working well. It comes out of the tap at 7 ph and around 80 ppm. I have used lemon juice to get it around 6.86 ph after mixing in my nutrients. 2/11- Very hard to water big girl as she seems to be drinking really fast and theres not much room; i'm having to water everyday. Not sure how long i'm going to veg but starting to worry about height for flower in my 3x3

Look at this... Look how fucking beautiful these plants are looking. It's really unbelievable that I am growing something like this at my home. This is their last week before harvest. The second round of photos are taken on the day before harvest. After that, I give them 24 hours of lights on to increase the trichome production even more but I'm too scared to do 48 hours on. They start to get a bit ugly, so I'm not sure if 48 hours of light would be too much

Looking good smelling great ....

First plant, 174.2 grams, super excited, not real happy with how buds looked, not sure if gentics weren't the best for this one but has airy buds except for where the tops were. Still smokes good so no real complaints.

Welcome to Veg Week 3 of Fast Buds Apple Strudel Auto I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Auto strain Apple Strudel: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 9-10 Weeks • Strain Info: 29%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.1 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

man o man, these look great! I am so pleased with how they turned out. The buds are hard little nuggets with tons of red hairs and tight buds all over the place. Definitely recommend Brothers in Farms

Hello!, Day 60 Flower I just done the my first harvest ever. Gelat og has cool looking buds, After seen the BUD ROT on one single bud in day 59 yesterday , Today in Day 60 i just cut the plant down for Dry. Going to WASH the buds with H202 (half of them) and going to dry for 10-14 Days and in to Jars for another 14-21 Days as I learned from fellow growmies. Thanks for everyone who support me through my First ever grow. Thumbs up guys. Day 60 - Harvest - 02-01-23 Day 01 - Dry - 02-01-23

Well she has ripened and I missed my flush time. So she has been on just water for about 5 days. Will likely put into darkness then harvest in days. Thanks again AMS🤜🤛 Thank you grow diaries community for the likes, follows, and subscriptions on my YouTube channel. I greatly appreciate the support. Happy growing 🌱🌱🌱

This week i changed wather and started to go with canna rhizotonic roots. They starting to get big and i startet to train them under the nets. Lights are boosted to 1000w and the LED same 100W. End this week i switch lights to 12/12. Big Bud is not doing good i try next time to get the same strains each tub to prvent nutrient problems. Ec was rising high to 1.5 so i put tap water inside to get him to 1.4 and awaiting next week. Ph is so far stable to 6.0, reason why is mineral magic really helps to keep the nutrients stable. We hear us next week when i turn lights on other time. Thanks and happy growing :)

Happy Holidazes Everyone!!!🙌 Week 6 For Lucky Number 13 AKA FastBuds Originals Auto Withe Widow. Pretty pumped about that 👍 She is growing very well and starting to form preflowers. She is developing this old school style weed stench its just very pungent with what I'd say is a little bit of a sour type scent in there too. I started adding House&Garden Bud-XL at 1 mL/gal about halfway through the week and will bump it up 1mL/gal next week then the week after that it will go to full strength. I am going to leave her under the Metal Halide bulb for another week or so until she is further into the flowering period, then the HPS light will get swapped in😊 Not to much else to report she is just cruising along doing her thing. Thanks for checking out Thee Auto White Widow Grow!! Happy holidays Everyone🙏🙏

She's looking very strong and healthy,she's gonna be a 🔝 lady for sure,let's keep on working to make things happen,peace and love ✌️🌱💚❤️💛

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

Another week in the books, one maybe 2 more to go, if the weather holds and humidity doesn't go crazy. Since grow diaries doesn't support more than 32 weeks, it's a bit of a pain to track the rest of this grow. Still I will post updates.

I am now flushing her with plain Brita filtered water PH'd with lime juice to lower her PH. I initially first flushed her with 42L of water and now I am flushing her once a day for 8 days and then I will put her in for darkness for 3 days and then I will harvest her and dry her for 9 days and then cure her for 28-48 days.

Hola amigos partiendo con la sexta semana, todas las nenas muestras claros signos de floración, se realizó la última defoliacion

Er blevet plantet over i 17 liter potter i stedet en 12 liters! Hun er allerede begyndt at vise tegn på rigtig gå i blomst 🌸. Det er først gang jeg prøver pulver gødning OG JEG ER SÅ POSITIV OVERBEVIST OM DET ER DET JEG VIM FORSÆTTE FREM AF ( undtagen det der ikke fåes i pulver ( endnu) 😇glæd jer til flere dagbøger og nye spændende planter og NYE SKUNK STRAINS OG NY GØDNING ÆGTE GRO JORD MED TILHØRENDE PULVER GØDNING! Det bliver fantastisk spændende😇🤩🤩🤩🧐🤩🤩😜😝😎🤪😇💚🖤💛💚🖤💛💚