Likes
Comments
Share
Week 15, week 5 of flowering. SpliffSeeds is definitely a recommendable seed bank. I’m very happy with all the plants, they are all making dense and nice buds. See the pictures and the video, they talk by themselves. Last week at max feeding. Next week I will start to reduce the nootz solution slowly and might give the last feeding just before starting week 7 of flowering, it will depends on the flowers development and the tips of the leaves, we’ll see. Buds are getting heavier, needed to add bamboo sticks and to tie some tops. Particularly the Lemon Cream Kush. Do not defoliate a canopy at this stage, plants are laying and holding on the leaves of each other ! From now, as I mentioned, I keep an eye on the flowers development and the leaves, particularly the tips of the leaves. And will readjust nootz and watering from these indicators. That’s all for the week folks 😊 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)
Likes
48
Share
@Arcadium
Follow
Did some major defoliating and general inner cannopy cleanup this week, spacing is beautiful, lots of airflow. Inner cannopy leaves are yellowing and dropping she's really pushing into flower hard now. Pistils are exploding, overall she looks amazing. Had yet another massive mushroom spring up at the base, fungal colony on overdrive! Top dress this week, may push to 40 Tbsp 70/30 AP/PB mixed with compost. Will alternate LCPT and BT sprays starting this week ever 3 days, should keep caterpillars away. Going into the rest of August looks beautiful, sunshine, no rain, though we are already getting mornings of 97% humidity, so I can feel that fall air creeping in, hoping this strain can handle the humidity, last year I hardly lost any to budrot (Blueberry Pie F1 Fast), but I did pull much earlier then I would of liked, but it turned out great regardless.
Likes
29
Share
Servus Moin! Die Chemical Candy fängt langsam an ein wenig lila zu werden. Sie hat von allen die dichtesten Buds entwickelt. Das wird eventuell die letzte Woche.
Likes
Comments
Share
@andzzz
Follow
reduced height of lamp from 60 to 30cm to the plant and throttled it from 100% to 45% added GH BioGrow with a mix of 1l coco soil to the pot. topped between 4th and 5th internode and removed another two top leaves later that week
Likes
20
Share
Amazing flower time 💚💚💚 Buds is strong ...verry strong . smell AMAZING 💚💚 Unbelievably fragrant plant. The flowers are beautiful and slowly begin to ripen. My guess is to wait another two weeks and it will be harvested.💚. Thank you watch
Likes
58
Share
@Kynareth
Follow
5 week vegetating. The nutrient overdose is still there. I was outside the weekend and the plant growed too quick (doubled in size in 5 days) so it got burnt with the lamp as yo can see in the pictures. I think it will act likea a topping but i don't know the real impact yet. I have set up an scrog to try to contain the height (1 week later due to logistic problems). The root system is insane and healthy. I think she is near to start flowering maybe this week or the next week. Day 36 update- as you can see the plant is preflowering. I won't change the nutrient solution yet to avoid another fertilization excess. when the plant recover from scrog and prunning i will change to flowering nutrient dose at 80%.
Likes
7
Share
@BIYEI
Follow
Lavado de raiz (Tiempo estimado 10 - 14 dias) Segunda semana de lavado. 25/03/2024 - 5:00hrs y 22hrs: Se hace cambio de agua y se calibra el ph, Sin nutrientes, Se hace Lavado de cubetas, tuberias, bomba, humificador, y perifericos, Se realiza limpieza completa del indoor, Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm ---, Ec 0.5, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 26/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm ---, Ec 0.5, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 27/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm ---, Ec 0.5, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 28/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm ---, Ec 0.5, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 29/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm ---, Ec 0.5, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 30/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm ---, Ec 0.5, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 31/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm ---, Ec 0.5, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad.
Likes
3
Share
@Seabass
Follow
25.7. Nächstes Jahr neuer Versuch. Ohne umtopfen (Start in Torftöpfchen) Ohne Schnippeln Keine softpods sondern eckige plastiktöpfe Automatische Bewässerung Nicht Südseite (zu viel Sonne) sondern auf der Westseite (Nachmittagsonne). Sämlinge schonen ggf. etwas später starten in der Veg dann aber draußen frei stehen lassen (ohne Zelt)
Likes
10
Share
Time is Coming to an end slow and steady.
Likes
9
Share
@Hypnogrow
Follow
Quarter Pounder and Skywalker are probably over due for final flushing. Squanch Queen is doing very well and looking to go 9 to 10 weeks. King tut and Alien Technology doing well. However, i did a spray of insecticidal soap due to seeing a couple small holes in a few king tut leaves. Next day plant was shocked and lost tons of leaves to burn. This plant did this once before with the same spray, the others no problem and didnt connect the two til now. Will let her veg back to health and flip to flower once shes healthy again and the autos are done.
Likes
6
Share
Video and pics were taken at the end of the 9th week, I was away on holiday and let me brother-in-law do the honors of looking after this beaut! Plant had performed a self-topping during my time away. It allowed for 2 colas to pop out from the top.
Likes
57
Share
this lady from the off set was the fastest growing and largest plant from the off set growing bushy with lots of leaves needing the biggest defoliation's too get that important light down too the many branches below, she is drinking about 8 pints of feed a week and loving life , and her bud production is also coming along nicely too , i cant wait too try this one ,
Likes
12
Share
@thonhash
Follow
Sorprendido gratamente del resultado final tanto de producción como de sabor/efecto.
Likes
32
Share
Blow Mind Blows My Mind!!!😎 👉Harvest day came! The plant trichomes were mostly cloudy, still a few clears and very little amber on the calyx’s. If this was the only indicator for this plant I would have kept going until I saw a few less clears. However the plant did not have many fresh calix’ and most of the leaves were fully faded and drying out (referring to the major cola branches). Since it’s a Sativa dominant strain, I wanted the uppy high and so there was no need to risk pushing any further. 👉To do the harvest, I started at the bottom of the plant. I trimmed the secondary branches off and most of those landed on the ‘larf’ net, and the major colas got wet weighed and placed on a clothes pin with a letter on it. I logged each bud with its wet weight. Each clothes pinned cola was hung on a drying rack. Some of the lower coals had some decent secondary buds and those were given numbers so they could be jarred with its main cola later. I was not able to access the plant and trim as much of the secondary branches from the main branches. The lower branches have lots of secondary branches and lots of under developed flower. I will categorize it as larf because it is under developed, even if each secondary branch would be the same size and quality as many of the so-called ‘contest winners’ on this site. But I digress…The bud structure wasn’t ‘perfect’, oversized calyx’s, longer and slender, with a bit of fox tailing. But oh wow is it frosty! This is the stickiest of any that I have grown so far. My first Gorilla glue lived up to its name as a scissor clogger…this plant is twice as sticky! The sticky is all over the plant and extends well out onto the sugar leaves and the stems. The lower areas of the plant also had more leaves on it, so it became a frustrating exercise of leaves being trimmed and sticking to my fingers as I plucked them, then switching to the scissors to snip the leaves, which quickly became sticky and required lots of scraping to keep working. I started using two different pairs of scissors, one for leaves and one for the buds. I did get a nice, almost marble sized scissor hash ball. 👉The buds had lots of sugar leaves; these were all frosty as fuck. So I only trimmed off the leaves that stuck out. I didn’t trim them close. The structure of this bud, a looser trim is seemed to be what it should get. I had 18 main colas, and 8 buds from a couple of the lower main colas. There was one and a half net racks with decent sized secondary buds, and two net racks full of ‘larf’. I didn’t weigh the larf after a few bunches. After all the buds were trimmed, cataloged and hug on the rack, and aimed a 42” tower fan set about 36” away and turned to a medium speed. Two smaller fans pointed at the round net rack. The grow tent exhaust was cranked to high because the sweet funky stank was pissing my wife off…so I knew it was going to be something special! Outside, even with moderate breezes you could smell it outside around the house. After 12 hours I rotated the buds side that faced the fans, after 8 more hours I turned the fan down to its lowest speed. I again rotated the buds and weighed a couple to see the reduction in weight so far. The buds on the net rack were turned every 8 hrs. During this time the outdoor temps were in the 40s and sunny. My HVAC was set to 65f and didn’t run much. After the buds started feeling a little dry on the outside I placed them inside paper lunch sacks and left the tops open. I monitored the buds closely till they felt like they were getting a little drier. At that time I closed the top of the bags. When I did that step I weighed a couple buds and we were at about 38%. Another couple of days like this and I weighed again, we were at about 25-30% weight remaining. Normally I shoot for 20-25%, however the buds felt very dry so I proceeded with the cataloging the weight as I placed into jars. I placed hygrometers in each jar and expected to be leaving the jars open regularly to keep the humidity down. Surprisingly most of the hygrometers were registering below 60% humidity with only a few of the jars needing any airing out. My target humidity is 62%, but since they have all been slightly lower I have held off on putting the humidity packs in. The buds are still a little moist around the middle and Im sure the extreme frosty stickiness is contributing to holding in some moisture. This isn’t a bad thing and I have the humidity low enough that I shouldn’t get any mildew. I put the 62% humidity packs into the jars as I felt that each jar needed it. The final weights do not include the 'larf'. The total of the underdeveloped 'larfy' buds was 142g and would make great hash. I wont be making hash however because I the kief hash is already more that I will consume. 👉I took a small larf branch two weeks early. . I just let it dry out with no care for about 5 days then put into a small jar. It’s really the best larf I’ve toked yet. Very sticky, sweet funk aroma, and a nice strong buzz. I sampled some of the main buds after being in the jars a few days and it was significantly stronger! Taking a tiny bit of the scissor hash at two weeks was exponentially stronger! At 6 weeks the flavor is wonderful. Smooth and sweet. The taste at exhale make me smile.
Likes
3
Share
@Lontra
Follow
Diese Woche war wieder entspannter als die vorherigen. Nach dem Lollipopping und dem Wechsel der Stammfixierung letzte Woche habe ich bewusst keine größeren Eingriffe mehr vorgenommen, damit die Pflanze sich vollständig auf die Blütenbildung konzentrieren kann. Der Stretch scheint zum Glück weitgehend abgeschlossen zu sein. Die Pflanze legt kaum noch an Höhe zu und wirkt nun klar in der frühen Hauptblüte angekommen. Am Ende der Woche liegen die 5 höheren Haupttriebe bei ~61-62cm und die 3 kürzeren bei ~53-54cm. Trotz des geringen Abstands zur Lampe zeigen sich bisher zum Glück noch immer keine deutlichen Anzeichen für Licht- oder Hitzestress. Die 8 Haupttriebe entwickeln sich sichtbar zu einzelnen Colas, und auch einige der stehen gelassenen Nebentriebe bekommen nach dem Auslichten nun genug Licht, um brauchbare Blütenansätze zu bilden. Die Blütenstände werden zunehmend dichter, und die einzelnen Budsites beginnen sich entlang der Triebe miteinander zu verbinden. Insgesamt wirkt die Pflanze vital, gut versorgt und stabil. Auch die beschädigte Stammstelle scheint weiterhin keine negativen Auswirkungen auf die Versorgung der Triebe zu haben. Gegossen wurde diese Woche zweimal: 1. Gießvorgang: Tag 73, insgesamt ~4,5 Liter (2ml/l Bio-Grow, 3ml/l Bio-Bloom, 3ml/l Top-Max, 5ml/l Bio-Heaven, 0,81ml/l CalMag, ca. 0,24g/l Bittersalz, pH-Wert ~6,1, EC-Wert ~1,95mS/cm, Topfgewicht vorher ca. 4,2kg, nachher ca. 7,7kg) 2. Gießvorgang: Tag 76, insgesamt ~4 Liter (2ml/l Bio-Grow, 3ml/l Bio-Bloom, 3ml/l Top-Max, 5ml/l Bio-Heaven, 0,81ml/l CalMag, ca. 0,24g/l Bittersalz, pH-Wert ~6,3, EC-Wert ~1,95mS/cm, Topfgewicht vorher ca. 4,3kg, nachher ca. 7,6kg) Die Lampe läuft weiterhin dauerhaft mit 100% Leistung. Die Luftfeuchtigkeitsregelung ist momentan wie folgt eingestellt: min. rF: 50% | max. rF: 60% | min. VPD: 1,1kPa | max. VPD: 1,6kPa