Week 4 of flowering... Raising nutrients to maximum Changing Calcium Nitrate 15-0-0-33 to Calcium Chloride 0-0-0-27 EC: 1.3

Still doing foliar: Cal-Mag Terra Aquatica, Pro Bloom, and silicate from T.A. some plants are removed because of root root. naw left with 19/24 plants. I also use a mobile app to set the light intensity, and I burned the leaves later. Which gave me the knowledge that the application is not very accurate.

All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 49 VPD is okay now - temps at 75F RH also now at 65% with ILVent at 50% = VPD of 1.04 - ppfd also same as yesterday mostly 480 to 490 around the ring with 510 and 520 in the center Took ph readings as well - 3 readings 6.43, 6.48, and 6.37 to avg 6.426 Which is good because she's starting to show signs of stress after the topping and defoliation from a couple days ago. The leaves are starting to curl at the tips and the bronze color stripping is happening again - however this time seems to be a slower progression so Im hoping that having the correct ph this time will help while she's re-routing her resources. I 'did notice also that the growth tips seem to be growing at a slower rate than before - I think she's at her limit in colas and the roots are having to find more space to spread, may even be too big for the 5 gallon pot. I have no plans to change her out just yet, but will monitor. Soil is drier today - so I will be watering tomorrow with de-chlorinated water at 6.4ph Day 50 VPD was good at 74/64 with the tent open while I feed that I left it open for a bit and took time in feeding and cleaning - after all that still good at 74F/61%RH/50%ILV ppfd was checked after water and setting back - same as yesterday as most of the newest growth is still coming from the new colas - most seem to be adjusting 1 at a time in each split but both are showing growth now on all cuts. Started feed by making new ph buffer solutions, calibrating/testing both meters. The have about a .15 variance between the two. Checked weight and made 1.5 gallons of feed. started at 228ppm added 450ppm veg and 150ppm bloom for a total of 833ppm feed/epsom salt - splashed h2o2 and ph'd to about 6.4- I fed via watering can and spray and fed the whole amount slowly since I was feeding until bottom drip and she took it all before starting to bottom drip. Afterwords I let her drain (about a quart came out) and checked ppm from runoff at 2500 (telling me she's okay but isnt eating as much as before her topping yet) ph is a mystery - I show 3 readings from top level of 6.62, 6.57, and 6.57 for an avg 6.586 but 2 separate readings from 2 meters (4 readings total) on the bottom runoff showed 5.3 and 5.6 then confirmed later. I expected a variance since the wood ash probably stuck to the top side of the soil - but I didnt expect that much of a difference. I will monitor but honestly dont know what I should do, if anything other than watch. made a video of the fan movements and runoff drip Day 51 What I am calling "stress burn" is progressing as expected. I am monitoring the ph from the top as I did before, but again, not much I can do other than over water, so I'll just watch for now and compare rate of spread until she fixes her resource pathways. It seemed to take about a week to clear up after the ash treatment last time, so I am on day 3 of 7 for now with no treatment. Looking for a spurt of new growth to show and then I'll know she's better. Adjusted the lights to accommodate a week 6 level of 500 to 600 ppfd - that means I can raise the lights to the top of the tent and increase power. So now set at 3 tick up and 37 inches from the soil or 26" from the plant top. Now her ppfd reads about 540 on both of the center colas and 500 to 510 on the surrounding ring. Adjusting lights meant I had to adjust the fans up to medium power and re-directed them to blow at the edges of the pot; made a video. VPD is steady, but still warmer than typical (only by a couple degrees nothing too much) 76F/61%RH/50%ILV for 1.15 kpa on room VPD Day 52 VPD is higher now that I have the lights to the top of my tent and the fans on the lights blowing down at the pot. I moved the IL Vent to the top sucking out with the motor and vent outside the tent now. I also opened two lower air holes with my heater set for fan on the opposite side of the tent than the vent. Currently, I am at a max of 1.2 room VPD and ranging down to 1.0 so I'll take it until it does something else. 74F/65% RH/75%ILV - I will monitor to ensure it's stable. ppfd is same as yesterday as there's little growth still. Spots are still progressing on the oldest leaves at the same rate as before - however the newest leaves are not showing signs yet, so I will continue to monitor. Day 53 ppfd was a little changed today, showing that there's growth coming back now. lowest on outer ring was 500 with most at 520 and 530 highest, center colas were tested at 540 and 560ppfd. VPD was stable as I watched it most of the day since I made changes yesterday. Temps were 74 to 76 and RH was 61% to 68%. ILV was set to 33% with the bottom heater on fan to draw in air. lockout continues on the oldest fan leaves at the last top nodes. New growth is already marked in a couple of spots. I have about 6 gallons of tap water burning off chlorine now and will use about 2 gallons to flush at 8ph. I plan to dunk this weekend with feed so this will allow time to dry out and hopefully reset the ph and lower my ppm readings at the lower part of the pot before then. Day 54 Took Control pics measured VPD and ppfd Lights are at the top of the tent and second tick from highest power level. Lights to soil is 37 inches and lights to plant is 12 inches shorter so 25 inches leaves to light. currently ranging 530 to 550 around the ring and 575/580 ppfd at center (after feed and replaced). Moving the lights (day 51) made the tent hotter so I changed my ILVent to suck out at the top and fresh air in at the bottom - I have been fighting to keep temps under 78 managed to hit 74 to 75 with the heater being set just to fan for the bottom air vents- I did also raise humidity to a setting of 65% a day before moving the lights, so Im hitting 61 to 68% between power cycles on the humidifier. Overall Tent VPD is 1.0 to 1.2 as max. Took controls for feed. Weight 16lbs 11oz. tested and calibrated 2 meters and took 4 ph readings of 6.55, 6.77, 6.53, 6.85 to avg 6.675. from top of soil (last runoff measured 5.6 and 5.3 on two meters) prepared 2 gallons of feed at 500 ppm over tap. (burned chlorine off overnight) starting ppm was 217 - added 75/25 veg/bloom ratio. ph balanced to 7.8 and 7.63 on separate meters (rinsed and retested to be sure got 7.79 and 7.63 again) I used 4 knitting needles in the soil about 3 inches from the plant center. Poured feed water over the needles until it pooled slightly on top of the soil, I then pulled the needle out a little to allow the water to drain into the holes better. I did this in 8 different spots. As soon as she started dripping water from the bottom I poured a little on the leaves and then moved the plant to another drip pan to finish pouring the rest over the top of the soil without dripping any over the sides. Took videos of the drip and waited 10 min before putting her on another clean drip pan and back in the tent. Runoff from second drip pan was measured twice at 5.8ph and 2410 ppm - and first pan 5.85 and 2670ppm (expected higher ppm since I moved perlite on the bottom with the needles) Defoliated the oldest leaves before lights out. Day 55 She mostly looks like she appreciated the clippings and ph balance from yesterday - slower progression of the lockout issue and largest new growth since topping day. So speaking of new growth, I plan to use LST in the next few days to set these colas in what will hopefully be their last bind around the ring. VPD is steady at 75F to 77F and RH is between 63 and 68%. My ILV have been set to 33% and the lower fan blowing rather than heat. top soil ph was measured with 3 readings, on a tested and calibrated meter. 6.47, 6.7, 7.12 to avg 6.763 (kinda wild in those readings so I double checked them all twice and got the same in each hole)

The smell is very strong up close, even with two inline fans and two carbon filters running. The plant on the left side started showing light burn. I checked the light levels above those leaves and it was around 75 DLI — looks like that spot is where the beams from my two “suns” overlap. I reduced the overall light output by about 5%, measured again and now it’s around 65 DLI in that area. That should be enough, I figured, otherwise the other shoots might end up starving for light.

Day 84 Mon Add Water PH 5.7 EC 0.7 - 0.5 DLI 12h PPFD Water 24c Day 86 Wed PH 5.8 EC 0.5 DLI 12h PPFD Water 18c Day 87 Thu Add ph up PH 5.6 - 5.9 EC 0.5 DLI 12h PPFD Water 22c Day 87 Fri PH 5.9 EC 0.6 DLI 12h PPFD Water 17c Day 88 Sat PH 5.8 EC 0.6 DLI 12h PPFD Water 19c

Por una parte tenemos la que llamaremos Biscotii 1: Tiene un tamaño monstruoso, que tuve que doblar en varias ocasiones el tallo porque no me daba más el foco para subirlo. De hecho una de las ocasiones me quemo una hoja del puntal y un pelín la puntita y como se puede ver hizo que la punta parezca un monstruo!! enorme, grande y de forma especial. Hay gente en instagram que me pregunta que si lleva anabolizantes jajaajja lo más parecido a eso es los nutrientes de plagron!!! Que las revienta a las pequeñas Esta tiene unos tonos morados que la hacen muy atractiva y una resina generosa. El olor es fuerte y la altura estirada es una pasada!! Por otra parte la Biscotti 2: El tamaño es inferior que la anterior, pero no por eso diría que poco productiva... Tiene un central que da miedo igualmente, los satélites son una pasada llena de resina. En esta ocasión no tiene tonos morados, pero tiene mayor resina. En general ambas dos tapan la botella de litro y medio de agua, prieta, olorosa y con resina para aburrir!! 😍😍😍😍😍 El peso le pondré en seco en cuanto lo pese 😇

Large 2x4 tent: Pineapple Express far back left corner, white widow front left corner; berry-white middle and purple trainwreck far right. Small 2x3 tent- purple trainwreck on week 7-8 of flower and white widow on week 3-4. Male-separated in a dark non-aerated room All the girls are growing well. Berry white suspected plant is still looking indica. Purple trainwreck is budding well and stretching too. Much more than I’ve seen other PT plants do, I don’t think the nodes are too spaced out though. White widow is starting to frost up. This particular plant is a clone, the mother developed buds on the leaves and the fan leaves were covered in trichomes giving me lots of good trim for edibles. The leaves are already beginning to frost up. The Pineapple Express is a bit out of control, I had to put a second net up to control her. I went ahead and super cropped her as well, I did snap a few branches but she doesn’t appear to be phased by the damage. I selectively pollinated specific branches on each female in the larger tent. The male was removed before the pods opened. I think one pod may have already split but I tried to minimize his natural pollination. He was moved into a different room with no air flow and no light. Pods opened in a few days and I used tips to collect pollen and then dab onto buds. Pollinated branches are marked with a green tie around them. I’m hoping that by spraying the tents with water after pollinating that I didn’t pollinate the entire tent. Here’s to hoping for neat seeds for in the future whenever I am able to grow again and for good bud 👩‍🌾🏼🌱

Girls are doing well with the LST. Kosher cake was topped last week and now has what looks like 8 heads. 3rd of June have given the girls living soil veg.

Finally starting to see little bud sights! Will post more pics soon

Flowering week 5. PH: 6.1 / Saturday - Sunday EC: 1.44 PH: 6.0 EC: 1.52 / Monday - Tuesday PH: 5.9 EC: 1.60 / Wednesday (04/03/2026)- The plant drinks, ph stays 5.9-6.0 and the ec is slowly decreasing.

420 Fastbuds BlueDream Auto Week 8 These girls are definitely showing off their beautiful colors. The flowers have started to smell super strong and looking about finished. I decided to put them outdoor for the last week since my tent was getting to warm for my comfort. I'll start checking the tricholms to try and get that 80/20 cloudy to amber for my personal preference of meds. All in all Happy Growing

I have to dry the buds in the dark, at 20 degrees, 50% humidity

So week 5 has started. This week should be flowering week but shes taking it slowly. She looks lovely and healthy tho. This week I start adding bloom fertilizer to her solution. I like the way she stayed low and bushy. She has around 8 colas with this small size. I am trying to rotate the fan leaves with sticks so the lower colas can see the light directly. Almost everyday I am doing some changes with her LST. Main stem grew vertical nicely just as I wanted. But still I couldnt fill all my coverage area. Maybe because of the strain itself, or my low power lights, or 12/12 start light cycle. Probably all of them affected her size. Day 30. Switched one of the 6500K bulb with 2700K. Now its 2x6500, 2x2700. And the 300W LED ofc. a short 1 hour timelapse. I need a bigger memory card so I can make a proper timelapse Day 31. Changed this week to flowering week. I can see shes focusing on her pre-flowers lately. Each day i can notice they grow taller. Changed another 6500K bulb with 2700K. Was waiting for next week but seems she is ready for full flow mode. You can see her curvy body on pictures. It looks really nice imo. Middle buds already as big as main cola now. Day 35. Last day of week 5. Fed her today and this time I add 1ml/l Top-Max. There are some small burns on random areas. Some are on edge of the leaves while others are in the middle like small dots. I guess they are light burn. No big deal hopefully. The first leaves on the bottom of her main stem are drying and dying. I think thats normal. Everything else seems pretty healthy. She is filling 30x25 cm area while my coverage area is 40x40cm. Not too bad but next time I will train it better for sure. Watering every 2 days with around 500ml water. And feeding between 2 waterings so every 6 day.

Giorno 7 taglio della ragazza andato liscio😉

Flowering day 12 since time change to 12/12 h. Hey everyone ☺️. Once again a wonderful week goes by 😀. It has developed so far and is now slowly starting to develop its flowers :-). As soon as the first forms of buds can be seen (I think in 5-10 days) 2 g GHSC Powder Feeding Bio Bloom per liter of substrate are added. In the third week, 1 g per liter of substrate is added so that it lasts through to the end :-). This week it was poured 3 times with 1 liter each 👍. The entire tent was also cleaned and the electronics checked for functionality. The humidifier was refilled every day and fresh osmosis water was drained into the tank for the coming week ☺️. The plants have all been checked for health and pests 👍. Next week the bamboo sticks are inserted towards the end for support and the lowest shoots are removed so that at the end the energy is not wasted in the lower area 👍. Otherwise there is nothing more to report this week :-). I wish you a lot of fun with the update 😎. Stay healthy and let it grow 🍀. You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: GHSC Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

the plans have been doing very well and despite being very hungry they seem to be doing very well I just need to start feeding them instead of once a week probably twice a week because they are very hungry now that they are in full flower mode . thank you for reading I will continue to update have a happy grow

Flushed the plants a bit early, which caused yellow leaves. Going to hit it with some 4-35-26 for two more weeks and then flush again & then chop. Chopped on day 87-89. All three plants vary. Excited to see how they smoke after drying and curing.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.