Hallo zusammen 🤙. Habe sie heute geerntet. Wir hören uns in 3 Wochen mit dem Erntebericht.

Purple Punch is a popular cannabis strain known for its potent effects and fruity, dessert-like aroma. Its genetics are rooted in a cross between Larry OG and Granddaddy Purple (GDP), two highly regarded strains in the cannabis world. Here's a breakdown of its genetics: Parent Strains 1. Larry OG Type: Hybrid (Indica-dominant) Origin: Derived from OG Kush, a classic strain with a strong, earthy, and piney aroma. Effects: Known for its relaxing and euphoric qualities. Larry OG contributes to Purple Punch's calming effects and robust growth structure. 2. Granddaddy Purple (GDP) Type: Indica-dominant Origin: A cross of Purple Urkle and Big Bud, GDP is famous for its deep purple hues and sweet grape-like aroma. Effects: Provides sedative, body-heavy effects. This parent is responsible for Purple Punch's vibrant purple coloration and sweet, fruity terpene profile. Purple Punch Characteristics Type: Indica-dominant hybrid (80% Indica / 20% Sativa) THC Levels: Typically ranges between 18-25%, making it potent but manageable for most users. Flavors and Aromas: Sweet, fruity notes reminiscent of grape candy, blueberry muffins, and Kool-Aid. Effects: Starts with a euphoric cerebral high, followed by deep body relaxation and sedation. Medical Uses: Popular for treating insomnia, stress, pain, and lack of appetite. Growing Information Difficulty: Moderate; suitable for growers with some experience. Height: Medium-sized plants with dense, bushy growth. Flowering Time: About 7-9 weeks indoors. Yield: Moderate to high yields, especially with proper care and nutrients. Appearance: Striking purple hues, dense frosty buds covered in trichomes. Purple Punch seeds are highly sought after by both recreational and medicinal users, thanks to their unique genetic makeup and well-rounded effects.

Harvested at day 116, had some problems of high inflow pH at week 11 that has a little decreased the final harvest, in my opinion. But I'm proud of my job cause that was the ONLY little problem in the entire grow. Keep Growing and learning everyday 🙏🏻💚🤞🏼🕉️

Привет друзья. Моей растихе сегодня 137 дней Всё утеплил. Отопление сделал. Девочек своих отогрел) Шишки наливаются но медленно. 20.10 перевёл свет в режим 12/12 Начал применять LST технику на 19 дне, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ С 20.08 LST технику На сегодняшний день влажность 54% 5.09.2023 заметил высокий Ph 7.9 С 48 дня Ph не ниже 5.8 На сегодняшний день Ph 6.0 Начал кормить с 60 дня Canna Terra Vega PPM 870 Всем мира и добра! Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀

60x60 cm tent in a 1920's peek-in-closet Oversized vent for silence High power DIY LED True SoG 12/12 from seed with 15 plants in 2L pots Watering all plants in bottom tray with 30% of total pot size (10L) WEEK 1 DAY 1 - Germinated in paper towel DAY 3 - Planted into pots + Lights ON at 125w DAY 5 - All plants have broken soil DAY 7 - Slight stretch - Light at 185w WEEK 2 Two of the Iced Out are lagging behind, others are on point - I'm trying to push light and nutes to the max. Extraction fan (AC infinity Cloudline T6) on level 2. DAY 13 - First full watering (10L) with 20 ml Canna Terra Vega DAY 14 - Circulation fan turned on (low) during lights on WEEK 3 Good growth, two Iced Out still lagging DAY 18 - Light at 225w, Extraction fan on level 3 during lights on DAY 20 - 2nd watering, 8L with 30ml Vega + Light at 250w DAY 21 - On point, mostly :) Could've pushed nutes a bit more from the go WEEK 4 DAY 24 - So far this week I'm just kicking back and watching them do their thing. The two lagging Iced Outs are trying to catch up. DAY 26 - Watering 10L with 50 ml Vega (one day too late...) + light on 300w (max) DAY 28 - 4 weeks from popping the seeds, looking good except for the two Iced Outs, one of them is trying to get with the program, the other... Well, some plants are just pricks. WEEK 5 I think this is the week we'll see them take off :) DAY 29 - Plants are starting to show sex, removed 2 Urkle Mints males, the other two are females, the rest are fems so we're down to 13 female plants total with only a single weakling DAY 29 - Watering 8L with 50ml Vega (shouldn't have been later than today!) DAY 33 - plants exploded over the last 4 days and most are stretching and starting to flower DAY 33 - Watering 10L with 60ml Vega (feeding Vega once or twice more then we switch to Flora) DAY 35 - Just cruisin' 😎

Things have been coming together very nicely, packing on very nice frost, buds have been foxtailing not too much but just enough, in result I lost some density to the buds which I don't particularly mind (my preference). The Terps are really nice and has simplified compared to last week when they were ever-changing. They know boast a black Cherry Punch forward Superboof flavor. Notes of ripe/rotten dank black cherries with that classic Superboof Orange rind/dankiness. The leaf rub gives a more sweeter black cherry wine almost smell with hints of bubblegum. Very nice change from the usual candies you see constantly nowadays. This is a dank one, every morning I wake up to the dank dank aromas of this plant filling the house. Quite a beautiful thing if I may say. All in all, one of my most favorite grows I've done too date! She's getting close to harvest if day another 2-3 weeks at most! Gonna check on trichomes soon but she's absolutely covered in trichs! I'll try and get better pictures!

Zz

Being lazy this grow yano the score too high

Lights 6500EVO 8(580w) UV (50w) 15min a hr, Under canopy (86w) 12hrs, IR 15min pre and post main lights, Deep Red 20min per hour pH 6.2 EC 2.5 PPFD 1150-1300

This is the tester strain sent to me by @toon_town it's a #saskatoonberry x #afghani mystery .. She has been great since day one very good growth rate excellent structure and lots of bud sites formed and filling out .. she has 7 friends to start but we down to three two females and a male plant .. The selected male show resistance to cold, humidity, lack of water .. the male had lots of growth and will make a suitable plant for some pollen ...

Week 1 - Day 1 20L Super Air Pots with a bottom layer of clay pebbles, (an inch deep at the centre point) and topped off with Growdog’s 70/30 coco perlite mix. The tops of the pots are covered by green plastic water distributers to evenly spread the water from the 12” watering rings. 2 lights; each 300W actual draw, currently inside the tent. 2 more coming next week to make a total of 4, across the 6 plants achieving a true watt draw of 1200W. Aiming for 1g/watt Germinated seeds from FAST BUDS, were planted and hand watered using tap water pH’d to high 5.8 to low 5.9 with H&G Roots Excl. giving a nice PPM of 362 to start. The BudBox tent is a 2x2x2m, using a Medusa Boosted XL run off trays to a waste brain were the run off can be tested. This will then be recirculated into the feeding tank again. The feed tank will a standard 100L water butt, retro fitting pumps inside for Feeding and Pump to waste - for cleaning the tank out each week. Another 100L water butt will contain a store of filtered RO water which will fill the feeding tank. A 10L PureMate humidifier is set at 65%, along with 2x RAM 16” oscillating wall fans which are mounted to the top of the tent for maximum coverage - set to lvl1 on swing giving the 25°C. No extraction yet. This is ready and waiting. 8” HyperFresh fan with a RHINO 8”x600 pro filter. We are using 8” acoustic ducting.✌️🏻 Week 1 - Day 2 No change. Keeping the new environment stable is difficult. The humidifier is not large enough for the space. Week 1 - Day 3 Fed PH RO water this morning. Trying to keep the humidity up inside the tent. They have popped up! It begins :D Did a feed of 5.8PH RO with CocaA&B 0.4ml/l, Roots excl 0.3ml/l, Calmag 0.2ml/l for a 150PPM. 300ml was used to moisten the coco per pot. Extraction fully connected. Environment stable at 23-24°C, trying to stay at 23.3°C. Humidity fluctuating 47-60%, humidifier struggling, but hopefully be okay. Week 1 - Day 4 All 6 are up and reaching. Husks hopefully will pop off soon. Will be doing another small feed this evening to keep the coco moist. Little leaves have appeared!! Fed another 300ml, 5.8PH @ 151PPM/ plant. Week 1 - Day 5 All shooting up now, tallest at 5cm down to 3.5cm 🌱 I gently helped the last 2 husks off the smallest ones to hopefully even them up. Gave the coco 1L of RO water around the edges. Week 1 - Day 6 Nothing to report this morning. Another PPM feed to be done shortly. Soaked the coco until run off with around 3-4L per pot using 5.8PH nuit water; 0.4 Canna A&B, 0.2 Calmag, 0.3 Roots Excl. 152PPM. First time we tested the Medusa brain - works well and pumps away to the feed tank, need to change one of the low trays to be a boosted tray for better drainage. Giving 5 boosted trays and one normal. Hand feeding up until this point, but will connect up the automation in the next week. Week 1 - Day 7 Strongest are growing around 1cm a day now. Tallest 6cm, smallest at 4cm. Looking forward to next weeks progress :) Bought a wet&dry vac - best thing ever!! Haha. Cleans everything in sight plus all the water from the dirty run off. Lifted all the pots, still a good weight to them so no feed or RO water today I think. Bring on week 2! 💪🏻

She is going fantastic... Great Citrus- Earthy smell... The grow is Bio... she is not drinking a lot... fingers crossed everything goes like this untill the end... 🙏

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

Random bagseed I found, was my first plant. Even though I messed up a lot and this plant didn't turn out as I had hoped, it was an invaluable learning experience and I look forward to using what I learned to make my future plants greater. Wet Trimmed and placed in jars in the mini-fridge to dry.

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Mar 6th - last-light tonight for Panama x Malawi. what was the old news flash...? “pictures at 11” - then a minimum 36 hrs in the dark. RH 35-40% A wet-trim b4 hanging is planned. See where that gets us... - pictures taken and lites out by 21:00. -Harvest starts Monday Afternoon - still working from phone pics, more later Mar 8 -Tent gets opened at Noon after ~ 40 hrs of dark. Then it’s pictures and a trim as Harvest happens today.. - a video has been added to the pictures, doing a last lap around the tent before they were harvested Mar 10th -off the clothesline, trimmed & weighed and now into a tent for temp & humidity control. - 4-5 days of 19c @ 50-55% Rh is the target Mar 13th both batches were weighed and contained. Left plant was both Larger and contained more Pot that the Right plant, which has historically been smaller from the start Left plant contained 5.6 ounces. The Right plant, which also had the UV-B bulb, and was smaller, contained 4.6 ounces. ... poking at details and photos as you read this

Let´s start Day 43 😎 some sun and cloudy with rain again 😳 Day44 cloudy and rain and cold 😡 Day45 rain and cloudy 😡 temp 16C/60F .. WTF it´s summer 😡😖😱 Day46 no rain litle bit sun and cloudy 22C/71F still not a real summer 😩 Day47 starts with rain and cloudy weather 😩 then came the sun finally 👌

There we go, now the diary is all sorted out and the weeks are accurate. Pistils still poppin'! Starting to get the first few brown pistils to show up on the low low plant buds. Tops are still filling out. I might as well raise the dimmer to 10. It's been on 9 about 11 inches from the tops of the plants. I dialed it back to perhaps reduce the stress from the hot dose of nutes. They burnt up pretty good but still rocking! Hopefully the next run i can keep them pretty for the full crop! haha The Nutrient mix i listed is not a feed chart regiment. I've had to dial it back a bit because of the high ppm of my tap water which caused me to give them a hot 2500ppm feed one day and they freaked out lol. So now i test my ppm and i try to keep it around 1000, to 1250ppm MAX Next crop I plan on doing some experimenting. I'm going to grow 3 strains. I want to do a diary for each strain and I'm going to experiment with some different nutrients (Remo Nutrients) and I'm going to do side by side comparisons with Hygrozyme and HygroBen, as well as Resin by Green Planet Nutrients. Next Strains will be; #1 Female Seeds "Lemon Kush" (2 plants) Clones #2 Barney's Farm "Biscotti Mintz" (3 plants) Clones #3 Expert Seeds "Oreoz" (3 plants) Clones 1 of each plant will be treated with Mykos Fungi, Hygrozyme Enzymatic root enhancer, and HygroBen which is beneficial bacteria. So we can draw a side by side comparison of each treated vs. non treated plant to see if Resin really does increase resin output, and if the plants health, vigour and growth are affected in a significant way. These plants on Oct 31, are 42 days into their flowering cycle. I expect them to finish near end of November. Nov 15 i will cut clones off my mother's and prepare for the mid winter run.

Days 120 - 126 (from sprout) 9/20/24 - 9/26/24 The Good Shit - week 13 of flower and trichome heads are looking far more swollen For IPM I sprayed existing mulch layer with tweetmint, followed up with topping all pots off with build a soil 3.0 and forest collected IMO's - fungus gnats almost completely eliminated overnight Pots were cover cropped with build a soil seed blend + grape tomatoes, oregano + thyme, snap peas and napoli carrots Fingers crossed harvest is on the agenda for this lady next week