Did some more LST on her and she liked it. Looks Like nothing happened to her. She's showing First signs of flowering Like getting pistols and Stretching a little Bit. I Hope she'll get bigger soon. Stay tuned 🤙🏽

again a rushed entry sorry will update back on schedule friday going to give up on one the F2 sour hound week 7 and still no signs of making buds think it may be photo and no room to grow a photo until after the winter

Upgrade light to 900w purple This week I feed her with light nutrients and High dose bloombastic 1.5 ml per litre This strain love nutrients while my other plant keep piss me off till now I never flush her always with max dose nutrients and never any problems Today day 67 I measured run off and was 1800ppm and I never have any problems she loves nutrients but now I give her just water with 1ml bloombastic till finiah to bring down ppm also I cut most fan leaves to keep bud dense and heavy (recommend by friend ) So let see I think she is ready in 7 to 10 days not long left Day 68 I flush her with 15L water to bring down ppm to 1000 and after that just feed her 1.5 ml bloombastic till finish

Week 7

✋Wk 7: Will the size difference begin to fall in line with the predictions, and rearranging the wind. 👉 This week is Day 48 thru Day 54 total. (Feb 16 thru 22). Today (day 54ttl) the 1 gallon plant is at day 21 flower and the 3 gallon is at day 9 flower. 👉 This week has shown some interesting things. The 1 gallon plant is still ahead in the physical timeline, and has also started to demonstrate how the smaller pot is limiting its size. The 1 gallon has been ahead of the 3 gallon plant in size and stature, until this week. The 1 gallon has stopped stretching and is beginning to develop its flowers. I was worried it would continue to get bigger and may become an issue vertically as well as horizontally. The 3 gallon plant has grown a few inches and isn’t really stretching up yet, but it is growing overall in size. It’s a big dome of leaves right now. Its main cola is same height as a couple of the secondary branches. I doubt the main cola will remain the same but this plant hasn’t been typical from its germination so only time will tell. 👉 The other interesting thing has actually been trending this way for a couple of weeks…the run-off for both plants has been lower than the inflow and no low EC fertigation has been needed. The 1 gallons roots are undoubtedly densely packed in the pot. It takes several minutes to apply the nutrient solution. The volume needed has also increased. The 3 gallon still readily accepts the solution, but it takes more every day and the run off takes longer to start running out of the bottom. The saturation level of both pots has increased, and the 3 gallon especially. The EC for both has stayed below the inflow EC. This is unusual because part of the volume of water in the pot when saturated isn’t absorbed by the plant, it evaporates on all sides of the pot and the top of the media. This would leave the dried nutrients wich would rinse off at each fertigation adding to the TDS. The reduction of EC in the run-off means the nutrients are being utilized by the plant. I have dropped the inflow EC of the 3 gallon a little because I was worried about burn. I have kept the EC of the 1 gallon plant at the low end of the recommended EC range of the General Hydroponics drain to waste nutrient schedule chart for the Flora series of nutrients. I use the entire line of these nutrients. For the one gallon I had been giving it only the “simple program”, and the 3 gallon the “expert” (entire line). This week when I noted that the stretch has pretty much ended for the 1 gallon, and decided that I will go ahead and give it the expert mixture as well but given at the low end of the EC range still. Ive included the Fertigation log for the week. It shows the tent temps, the outdoor temps and HVAC setting. Also, I note when a fresh batch is made and what week on the schedule it is. Each pot has the recorded time of fertigation, volume, pH, and EC of the solution given and the corresponding run-off. I mix the solutions at full strength and use a solution with just silica and Cali-magic to reduce the EC to the desired EC. I mix that in at fertigation time. I also adjust the pH if necessary at this time. 👉 The structure of the 1 gallon is very stout main trunk, and each branch is very sturdy. The bigger fan leaf production has given way to smaller leaves. The structure of the 3 gallon also has a very stout main trunk and each branch is very sturdy. The 3 gallon has some very large fan leaves and it has lots of vegetation. Its very dense and hard to peer inside. For both plants I have begun to selectively remove branches that would not be producing anything but larf. The 1 gallon only needed the lowest main branches trimmed. I also removed some of its smaller shaded secondary branches and leaves inside the canopy. The trimming on the 3 gallon is similar, however its much harder to get inside. I just do a little at a time at each fertigation. Im not sure if the first set of branches on the 3 gallon will be tall enough to keep but I want to wait till the plant starts stretching to see what they will do. Ive left as many leaves as possible in the 3 gallon…a lot of really nice fat food factories. This plant may go very large, or it may stay somewhat stunted as it did during the early veg phase. 👉 I positioned the plants I closer to the back wall. I bought a oscillating tower fan and was hoping it would be a good addition to the tent. Alas, it had too strong of a wind current (on the lowest speed) and the 1 gallon was showing signs of wind stress after 2 days. So I removed the fan and re-positioned the smaller fans I had clipped up top of the tent. Both fans are now hanging lower on adjustable ropes and point toward the plants. They are working well like this and the air flow is good. I may modify the oscillating fan and install a variable resistor to the fan motor to reduce the flow. I have added the branch support to the legs of the stand the 1 gallon is on. These posts will be used to support the weight of buds or position them as needed. I will add the support posts to the 3 gallon plant after it has gone thru its stretch, maybe another 2 weeks for that.

ACTUALIZACIONES A DIARIO!! Miles de gracias al equipo de Royal Queen Seeds y a @James por proponerme esta aventura tan trepidante y poder conocer de cerca las nuevas F1 y sobre todo a la gran Titan F1. Espero que lo disfruteis y os sirva como referencia. ¿Qué piensas cuando lees la palabra “Titán”? Hay quienes la asocian con los hijos de Urano de la mitología griega. Otros saben que Titán es la luna más grande de Saturno. ¿Y entre los cultivadores de hierba? Estas personas reconocen a la Titan F1 como una variedad de marihuana con una genética de vanguardia. Se trata de uno de los primeros híbridos F1 autoflorecientes, y es una variedad pionera que ofrece productividad, resistencia y algo completamente nuevo. La Titan F1 deleitará tu olfato durante la fase de floración y más allá. Esta variedad autofloreciente ofrece un potente perfil de terpenos compuesto principalmente por mirceno, farneseno, ocimeno, pineno, bisabolol y limoneno. Gracias a MarsHydro 😊🙏 por darme la mejor luz que hay en el mercado. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos para esta aventura una carpa de 60x60x90, MarsHydro una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. 🌻🚀 Consigue tus semillas aqui: https://www.royalqueenseeds.es/semillas-de-marihuana-hibridas-f1/624-titan-f1.html 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ Sexta semana de floracion, las planta ha terminado de estirar, las ramas laterales han estirando junto con la cola central y se muestran los futuros cogollos, es una planta muy compacta y he tenido que quitar alguna hoja baja para evitar la aparicion de algun hongo. Se muestra una gran cola principal. Es la genetica que mejor ha respondido, por no decir la mejor. Felicidades Royal Queen Seeds y MarsHydro 😁. Los cogollos han estirado muy rápido y se ha formado una larga cola principal con muchos cogollos en las ramas laterales, continua cargandose de resina. Las flores empiezan a engordar. 📆 Día 56 : Riego con nutrientes EC 1050 📆 Día 57: Riego con nutrientes EC 1150 📆 Día 58: Riego con nutrientes EC 1150 📆 Día 59: Riego con nutrientes EC 1150 📆 Día 60: Riego con nutrientes EC 850, se aproxima el lavado de raíces, esta Titán es realmente rápida, con largos cogollos densos y llenos de resina . 📆 Día 61: 📆 Día 62:

❤️

I cannot believe how much growth this week!!! I think she has doubled in size!! For the first time I've had to higher the light fixture. It is now almost as high as I can put it. I'm kinda regretting not FIMing her now...... I hope she does not grow much more in height!

Harvested around 1 week ago, slowly drying with around 22° and 60% humidity. 3 different phenos. N2 Is the best about of 3. N1 is biggest one but buds quite small. N3 is not as frosty and dense as 1 and 2.

Day29F - still showing vast growth on buds, swelling and trichomes blossoming out. The colours starting to form nicely on the buds. Smells like a pungent caramel now. Day32F - This plant is so thick and strong, and can resist a dry and hot climate. For me this plant has been so easy, and she sucks up nutrients and loves it, 💪 Buds are getting dense and so sweet to smell. So fat and so many, I'm surprised on this auto 👏 well done again RQS. Day 68- Day 33F - the buds continue to swell and devolope. Trichomes flooding through now. Starting to see cloudy so will push for another week of nutes if she'll allow it after Friday, we'll see 😏✌️💚

FAT BANANA 🍌 AUTO / RQS WEEK #7 OVERALL WEEK #2 FLOWER This week no issues to report she's doing really well so far buds are looking good and growing at a high rate. Stay Growing!! Thank you for stopping by and taking a look!! It's much appreciated!! Thank you ROYAL QUEEN SEEDS!! FAT BANANA 🍌 AUTO / RQS

Day 50 - Starting week 8 and have been impressed with how this girl has been producing. Not as “thick” as she could be but still looking like pretty tight buds. Will be giving her a feeding of nutes tomorrow. Day 51 - Thinking this girl might be getting kind of close to harvest. About two weeks or so maybe. Looks great for a mutant. Gave her a full feeding of the foxfarm trio today. Day 52 - Gave the girl a pretty decent defoliation today to try and maximize the light to bud sites. Don’t know how much longer she’s got, 2 weeksish is what I’m thinking but not gonna harvest early. If she needs more than two weeks, then I’ll give her more time.

Deep watering on Sundays (buildaflower compost tea) Moist watering on Wednesdays ( vitamin c water & jay plantspeaker ) Cut down 3 hermies from light leak 2 charmz 1 Apple fritter

Week 13 I wanted to harvest this week but the buds seem air still so I move my light closer to see if that help fatten up the buds.

thank you to the divine seeds team for the chance :) the girl is growing little by little:) I will keep her at home for another week, and then she will travel to nature :).

Fume wedding cake 🎂

Weeks are flying by, topped & took off 2 leaves

BPW pheno 1 clone 🥇

Diese Woche haben wir 2/3 getoppt, die dritte wird nur hart mit LST penetriert. LST müssen alle drei über sich ergehen lassen. This week we topped 2 out of 3, the 3rd one only gets LST, which will be done on all three.