Likes
Comments
Share
Likes
13
Share
@Bncgrower
Follow
Everything is going very well as expected, good progress. I had the transplant on the last day of the first week..✌️🌱
Likes
15
Share
@Dr81n
Follow
Last 2 autos coming up maybe week or 2 before done. Expecting the large Durban og auto to foxtail some as it keeps adding white pistols. Smaller plant lost track of strain as I didn’t much care but for a little gal she is pungent.
Likes
19
Share
@valiotoro
Follow
Hello everyone 😎 Week 4 of flower for the Banana Purple Punch auto from Fast Buds 💥 She grew fast with a beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds from Plagron Mars Hydro SP-6500 70% Have a nice day 😋
Processing
Likes
4
Share
Week 6 - Venom OG and an unknown seed strain. No nutes - tap water Just flipped to a 12 hour light schedule Venom OG is in the normal pot.
Processing
Likes
30
Share
The two blueberry autos are coming along great! They are just now starting to fade out but trichomes for the most part are still clear and cloudy. I’m guessing these girls will be ready in about 1-2.5weeks! When I open the door I get a really pleasant burst of a fruity cereal type smell. It’s comparable to something like crunch berries or as other growers have noticed fruity pebbles 🍓🥣 Right now I’m just feeding the girls spring water, with a little bit of Alaska humus (around 15ml/5L), molasses, fish sh!t and great white. I let this aerate for around 12-36hr. Unfortunately while moving the pot one of the branches snapped under its own weight. The entire plant needs to be supported now as it’s leaning a good amount from the weight being packed on!
Likes
5
Share
IR lights on 3 auto 3 photo in vega in 2/2 grow box After Co2-1200 ppfd 1200+ Thanks to everyone who answered my question
Likes
2
Share
@4D2
Follow
Everything very Good . No Problems at all.Nice Strain for beginners.
Likes
39
Share
@Mastr
Follow
I chop her down and let her dry Hi everyone this genetic is very very hard to grow I had 3 orange sherbat and 1 with very very small nugs and she produce 45g only Second one was 90 nice dense buds was amazing 👏 And third plant which is very very big main colas are getting airy and foxtail ass well honestly guys after drying bud become very very very bad I use this one for make some hash so I never grow her anymore I'm done with this strain happy growing
Processing
Likes
1
Share
@MG2009
Follow
09/20/2019 Going into week #6 flowering starting to plump up!,fade is starting as well. Gave her a tbls of gypsum,and ditomacitious earth as her last inputs,water only from here on out.
Likes
13
Share
@Pali85
Follow
Letzte Woche mit flüssig Nährstoffversorgung. Hab leider rausgefunden, dass der Bud Candy doch nicht organisch ist und es davon 2 Varianten gibt. Na wie auch immer, die Buds schauen echt klasse aus und duften auch echt lecker. Muss ich ständig davor setzen und tief Luft holen ;)
Likes
12
Share
🗓️ Week 13 complete – 9th week of flowering (final stage & flush) 🌿 General: We’re in the final stretch – all three plants are currently being flushed with Flawless Finish. The fade-out is clearly visible, trichomes are mostly milky with the first hints of amber. pH remains steady at 6.2–6.3, and drain EC is slowly dropping as the plants break down their internal reserves. 🔴 Seriotica: Flush is going very smoothly – drain EC has dropped from 2.2 to 1.8. She’s responding evenly to the Flawless Finish flush (EC ~0.5). Buds are compact, heavily frosted, and trichomes are hitting the perfect milky stage – optimal harvest window is just around the corner ❄️🌕 Everything is on track – harvest coming soon!
Likes
28
Share
Start of week 5... Looking back at the first few weeks of veg, i never imagined that they would thrive this good in week 5 already! (Look back at week 1+2 for horror pictures) Whole of week 4 i worked on my climate control automation. I will keep the set up for atleast a week. 👽👉26/9 Big LST day. I got new supplies to manage the rest of the ladies properly. Topped another one ( 5/6 is topped) Cut just a couple of leaves. The crusty ones that did not receive light and the ones casting shadows over my lovely budsights. 👽👉27/9 Waterday* and recovery 2ml/L Bio heaven + fish mix / 6.4 PH 1.68 ECLetting them recover Humidity a bit higher during night because of watering, turned the temp up to match the VPD. 👽👉28/9 They look content, humidity a bit higher during night because of watering. 👽👉29/9 I am happy how you thrive, but they need some pruning/defoliation as soon as they have recovered from the stress training. 👽👉30/9 Did some defoliation, decided to flip to flower after their recovery. 👽👉1/10 They had a case of empty humidifier, resulting in high vpd for 7hours. Water day* 2.1xml/L Bio heaven + fish mix / 6.2 PH 1.75 EC 👽👉2/10 They look great, healthy and happy! Climate is back on point
Likes
34
Share
Harvest 33 Days After Flower Switch ( Flower Week 4-5 ) -Loading-
Likes
57
Share
@Kmikaz420
Follow
Je passerai demain pour remplir les commentaires j ai actuellement pas mal de travail à couper/trimer 😀 et le tous sur une jambe ..merci de votre compréhension.. Et voilà une de moins la 1ere dos-i-dos de batney à été couper et cette plante a fais les tête les plus compacte et dur que j ai jamais vue je pense être pas loin de la vérité en disant qu il doit y avoir 120g.. 150g sec sur cette seul plante ;) affaire à suivre ..je rajouterai des photos demain )les photos avec flasch ne rendent pas service aux plantes;) Enfin on t est la recolte !!!! La strawberry x gorrila seche avec les dos i dos et la gorrilla x purple punch Les 2 cherry cola ont été trimer et mis en bocale pour curring Cherry cola 1= 88g Cherry cola 2= 83g Gorrila x purple punch = 40g J ai pas mal de travail je mettrais le journal à jour au fur et à mesure ;)
Likes
6
Share
Left seeds soling in water over night and then used paper towel method
Likes
88
Share
@No_Clout
Follow
15/08/18 - all looking good got loads of roots piercing out the sides of the smart pot , I’m thinking of adding cannazyme soon to break up all the dead roots etc, I’m feeding them the usual tonight and 2 litres each 💧and I’m done with LST now im just gonna let them start to stretch🙏🏻🙌🏻 17/08/18 - saw some weird marks on a leaf or two this morning and then later on it look like the pic above, it’s only happening on older leaves it’s not affecting any new growth, I’m out of grow questions so any help would be grear ✌️🏻 20/08/18 - just watered them with the above ☝️🏻 All looking good think I’m half way through the stretch so I’ve started to add some canna boost to the solution , probably gonna do some LST later on this week.
Likes
97
Share
There doing great at 36 inches. Looking healthy and getting 4 and 1/2 hrs extra light. Growing fast that is for sure. Did some defoliation bottom carp. Found thrips so I had to spray. Hope I killed them.
Likes
30
Share
@valiotoro
Follow
Loud cherry terps,gassy cola notes, and seriously frosty flowers. ⚡️
Likes
3
Share
@CalGonJim
Follow
3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs