SoCal Outdoor, 3.9g Autopots, coco, jacks RO Blue Gelato 41 is in week 3 of flower and still stretching. The plants range from 68-78 inches tall with thick 2” trunks. Two months old, unbelievable….. 3.9 gallon pots. Defoliated the plants twice this week to promote lollipoping and airflow. Little signs of nute stress as I added some koolbloom to punch the PK up. No pests, but the caterpillars 🐛 are definitely gonna show in a few weeks for sure. The Autopots are holding up pretty well. But I think the 3.9g pots will stunt the gelatos growth possibilities. My runtz is in a 15g fabric pot stuffed into an Autopot XXL and although it was about 6”tall 4 weeks ago - it is almost as big as the gelatos and growing faster every day. I have to move these to my secret spot and get them out of sight before they start stinking. Next, I’m gonna have to net them to keep the caterpillars out.

no new balls. but some seeds

Couldn,t have some time for photos

Mazar has a unique design that has us in awe, this is definitely a rare looking plant with features that remind us of strains that grow in far away lands. Our only upset with this girl is the powdery mildew that has started to set in, this is disappointing at this stage because we prefer not to use any type of spray. We used tap water with a ph above 9 to see if that would help, regardless this is a sign that she may not be the best strain for outdoors in our climate. Epsom salts have been added to our rain barrel once a week and Mazar has had a few dustings of coffee grounds added to her soil bed. Either way we appreciate her beauty and hope she can stay free of the rot as the bud thickens and the cooler air sets in.

STARTED FOLLOWING WEEK 1 feeding chart lotus Fed with lotus 3/18/26 Watered plain - 3/21/26

Another week closer

Nice flat canopy, no more wire needed for LST, will just gently pull the branches down as it grows. Now just need more growth! Trichomes popped and a lovely citrus aroma.

GOOD WEEK 4 EVERYBODY 😎 !!!! Starting today Week 4, girls are pretty well since last week, the problem of development was because i had the Humidifier to closer this two girls and very high humidity. All the system controlled by --> GROLAB + modules: 3x irrigations a day 400ml total 4x day CO2 until 1000ppm, with light ON Nutrition: REMO Nutrients entire line Thank you all, have a Aswome WEEK. Regards, _GrF_

Next weekend i let you know what is the outcome

I took everything out of the tent and disinfected it again. The pots have made the tent base into a ball 😅 The velcro tags fell off long ago. I decided to put some new ones on. I have some wider velcro that I would've preferred to use, I have misplaced those. Anyway, these will have to do. I also made some large pot markers to velcro to the pots, too. I figured it would be easier to recognise the plants in photos if I made some. I laminated them, then attached the velcro to the pots and pot markers. [I get bored] 😅 make everything as fun as possible 💚 I ended up finding some sticky back velcro rolls. Of course, there's no way that it would stick to a slippery surface that gets wet from humidity. So, I used my glue gun and added strips to each side of the tent liner and tent walls to hold ot in place. The 8 gallon pots are very heavy after being watered, and the liner has suffered. Hopefully, this will work to keep it in place, at least for a while! 😅 7.5.25: I also had to clean my pots, as you can see in the photos (if you want, lol). They had got very mouldy/mildewy/fungussy. 🤢 also the under side of the tent liner. So it was very lucky that I decided to clean it at this point. Or else I could have serious issues. I'll look into the ventilation as I'm not exhausting the tent because I leave the door open with very strong airflow. I did spray the plants with Trace, and I used a lot of it. So, that probably ran down the walls into the base of the tent before it dried 🤔 that could have easily caused it. I'll have to make sure I dry off the walls after I use it next time. I certainly don't want to keep cleaning everything. The plants are delicate, and unfortunately, however I try, it appears I am not. I'm always snapping branches off by just watering, let alone removing them from the tent to clean! 😅 you can imagine. Accidental defoliation? 😉 I also cleaned the light, but I have noticed on one light that there are brown spots, which won't come off without damaging the LED's. I really don't want to have to buy a new light. The par isn't great for full flowering. I just can't justify buying a new one right now, as I've already bought 2 in a year. The light has been turned up to 100%, gradually, over the course of a few days. It has been fairly warm so I moved them further away too, as i don't want them to get heat stress, as I have already noticed a few leaves canoeing and having a taco on my dime! 🤨🤔😅 I'll continue to monitor and adjust again when possible/necessary. 9.5.25: Hulkberry has certainly started her stretch! I'm really low on space to train her out, and the light has been turned up to full power. She has begun to drink more, and I gave some more dechlorinated water PH'd to 6.4 with ♡ 1/4 tsp of Greenleaf nutrients Sea K(elp). PPM: 800 PH:6.4 I am very pleased with the recent growth spurt, so let's hope I can accommodate her! 😅 9.5.25: It's a necessity to keep the soil moist. That means I need to water more often now. Today I watered with 1.5 litres of dechlorinated water PH'd to 6.4 which contained: ♡ 1/5 tsp of Sea K(elp). By Greenleaf nutrients ♡ 1/4 tsp Ecothrive Biosys. PPM: 564 PH: 6.4 12.5.25: Hulkberry was very dry, surprisingly. Although I guess I've been giving her less. She was fed with a high dose of Ecothrive Trace: 7ml/7l. She was fed with 6 litres over the course of the day. PH:6.4 PPM: 515 I had added this as a foliar spray last week, and it has apparently damaged some leaves. Left some dry orange patches in the leaves. So, having that happen makes me want to just water with it. Thanks for checking out my diary and hanging out 💚 ✌️ 🍃 😊 🌱

Well that was fun. First time delving into the homegrown world and I’m officially hooked. Following the cocoforcannabis nutrient schedule and method, I ended up with 200 grams of dry bud and an extra 40 grams of trim/larf for edibles. I may have had them in the dry tent for a day too long, the hygrometers in the jars have settled around 54% RH, but they feel pretty damn sticky and moist to me. Been toking the larf and the high is really nice, definitely smoother than anything I’ve gotten from a dispensary. Can definitely taste the 🍇 and I’m excited to see what a little more cure will do. Already have my seeds ready for round 2, thanks for checking out the grow!

against better judgement i topped each of the main branches on day 4 of flower. we will see if she responds negatively but i didn’t want to risk the height

They r still stretchin they asses off.😁 2 maybe 3 more feedings wit grow nutes. Other then the mutant alaskan purp, everything looks good. They look loke they r still in the middle of strectching, so im guessin ill average a height of round 5'5"-6ft for the 30 inground.😁😁😁 the short ones r big around tho so im happy. Gave up trying to figure out the problem with my mutant ap. I cut it way down on nutes and didnt see a change. Will just treat it like the others til harvest n see what happens.

April 26th - Day 76 : Oh my god! The smell wow! Everything just came blazing couldn't believe. They look good. I can tell the yield will be small but I don't really care to be honest. I'm so excited to see them babies grow healtly, i'm like a proud dad.

She's doing great. Beautiful Leafs and a good height for her age. Let's Go veg!🤙🏽

Fruity Pebbles #2 is growing great under the Medic Grow Mini Sun-2. She just started showing her first pistils. So preflowering has started. I dud some aggressive training on her to prepare her for the stretching. The difference between plant 1 and 2 is the nutrition used. This plant is in Athena blended line. Everything is looking great at the moment. She will need a solution change within the next week for blooming nutrition. Thank you ILGM, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Merry Christmas and Happy Holidays. Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

🌱🌱🌱Continuamos este cultivo, con esta hermosa cepa de FastBuds, Girl Scout Cookies Auto, entrando en el periodo de crecimiento mas exuberante vegetativo.🌱🌱🌱 👨‍🍳👨‍🌾🏻 Nutrición y Bitácora 👨‍🌾🏻👨‍🍳 Día 15 se riega con una solución nutritiva NPK de 1 Litro con Plagron Power Roots (0.3 ml), Plagron Pure Zym (0.5 ml), Plagron Alga Grow (0.7 ml) y Plagron Sugar Royal (0.3). Día 16, se mantiene saludable creciendo 👨‍🌾🏻, asimilando de muy buena manera el riego nutritivo del día 15 Día 17, sigue creciendo y creciendo y cada vez mas hermosa esta bella planta 😍 Día 18. Se ajusta el LST para bajar el apical. Se riega con una solución nutritiva NPK de 1 Litro con Plagron Power Roots (0.3 ml), Plagron Pure Zym (0.5 ml), Plagron Alga Grow (0.7 ml) y Plagron Sugar Royal (0.3). También se ve la producción de mas ramas bajas que comienzan a tomar fuerza como posibles colas principales y también se ve la aparición de los primeros pistilos, así que estamos prontos a comenzar la Pre Floración, pero aun le queda un buen tiempo en su etapa vegetativa de máximo crecimiento. Día 19 sin novedades. Día 20 se instala la malla para direccionar las ramas. Se realiza defoliación para mejorar la penetracion lumínica y se riega con 1 litro de solución NPK + Trichodermas. Día 21 la malla mejora el uso del espacio, mejora considerablemente la penetracion lumínica y el crecimiento sigue de manera constante. La planta ya esta pidiendo mas alimentación y riegos, en 24 horas el sustrato se encuentra casi seco. Va de maravilla entrando a la cuarta semana 💪 🚀Equipamiento🚀 Indoor de 60x60x159 cm y una iluminación BlackCob F320, se activa solamente 1 modulo (160w) a 70cm para estimular su crecimiento, pero evitar estrés lumínico (en el día 21 se ajusta la iluminación a 55cm del canopy), se agrega un humidificador HUMIPRO para mantener estable entre 55 y 65 % la Humedad, intractor de 100mm, extractor de 100mm, filtro de carbon, ventilador "oscilofan", ventilador "clip fan", 2 termohigrometros y se agrega el día 20 una malla SCROG de kanovi Acompáñenme para ver los resultados de este hermoso desafío, un saludo cultivadores 🔥🔥🔥