Likes
Comments
Share
All 18 CANNALOPE HAZE plants from DNA-GENETICS continued thru week 6 to develop their BEAUTIFUL flower crowns. The plants on the right under the Q6W-Gen. 2 LED-Lamps from SANlight are in general a little more uniform (all have almost the same height). The plants on the left side under the Lumatek PRO 600W are developing well, but some are smaller and some are taller. The production of flower seems to be on PAR now between the two sides, but thats hard to judge only by looking at them. In the end the weight will tell, who produced more flower. 😃 I still give only PURE tab-water, without any PH correction, since the BIOTABS nutrients are adjusting the ph-value and work for the FULL-CYCLE, its unbelievably easy and convenient, I LOVE IT! 😎 The Ambient Q240+ from HOMEBOX is now nicely filled by the plants and they continue to grow well. 😁 The Lumatek is still running at 100% at a distance of 50 cm from the top of the plants. The two SANlights at 60 cm distance were so strong (first signs of light bleaching) that I decreased the power by dimming them to 80% during week 6. I am curious to see how the test goes on further...
Likes
10
Share
@Mancha
Follow
17/08 - I had a 5 days travel, which worried me a little, mainly because my irrigation system did not arrive in time. But when I came back the plant seemed very healthy. The medium was dehydrated but as you can see even after some defoliation the plant continues to be very bushy. 19/08 - Very wide canopy! I have a 60x60cm tent and half of it it's taken by the Rhino Ryder. Had to rearrange the tent. The Rhino is a bit behind the other plant. 21/08 - Did a defoliation to open more the canopy.
Likes
Comments
Share
Tropicana Cookies Fastflowering by Fast Buds Genetics
Top-shelf buds. Beautiful dark purple bud that smells of fresh citrus. G‍rower: 'Highigan' (from Instagram & YouTube)
Likes
1
Share
Привет садовники !!!
Processing
Likes
Comments
Share
Soil amendment in regular potting soil some uprising foundation the some dr what Eva 4-6-2 worm casting and small brick of coconut coir and mixed all together lol 😂
Likes
4
Share
Welcome to Veg Week 1 of Sensi Seeds Mandarine Jam I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Mandarine Jam: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sensi Seeds • 💧Strain Info : 20-23% • ⏳ Flowering Time: 7-8weeks
Likes
25
Share
FAT BANANA 🍌 AUTO / RQS WEEK #12 OVERALL WEEK #7 FLOWER This week been a good week for this lady she's really started to pack on the weight this week as the buds bulked up and the smell is amazing. I'm a banana strain guy so I'm really looking forward to this strain being done!! Stay Growing!! FAT BANANA 🍌 AUTO / RQS
Likes
151
Share
@BioBuds
Follow
The Extrakush, the odd one out. What started out as a save because my third-party Barneys Farm seeds didn't germinate, this diary was supposed to be about their Runtz, but when dealers sell old seeds and replace those old with some even older seeds Expert seeds, fool me thrice.... So this was a shot in the dark, these were the only seeds I had available at the time, bought as a try out for the garden. A species designed for NW European climate. And she had, due to germination disasters, two weeks less of growing and she had a brother in the same pot, only removed in flowering. Still she filled out the entire tent and some space of her failing neighbour: the Gorilla. What a gem this strain is, look at those buds, look at her outperforming expensive seeds at a dollar a seed. Yes we still have to see some trichomes, yes she is mostly still hairy and not filled out yet but she is racing there. Let's hope on some quality smoke from this lady, for now, consider weedseeds.site as a place for quality strains. Merry Christmas everyone from Sunshine and me, check the video for a more personal seasons greeting. Special thanks to Mars Hydro, without whom we couldn't have this grow! Thanks @MarsHydroLED
Likes
4
Share
@4F1M6
Follow
What a fucking main cola! Shes got atleast a foot of length that will be a solid mass by the time shes finished! No vertical growth to speak of... thank God lol. Trichomes are starting to pile on, and that oh so familiar smell of straight gas ⛽ beautiful. This lady got treated with Dr zhymes as a preventative. I also adjusted her feed to a more bloom heavy dump. Next I will start to tail off the nitrogen. Little bit of tip burn just on her upper portion. That got a little over exposed to the light in her old setup she out grew. No biggy though life goes on. Until next update. Happy growing and stay lit fam.
Likes
32
Share
DAY 49 Ive runned into some problems with different deficiencies but im trying to correct it.. otherwise the buds are becoming bigger and alot more crystals are beginning to come.. i think most of them have atleast 4 weeks before harvest, but maybe i will take some down before that.. Its really crowded, but im hoping to get a week with big buds now, cause they are not that big all of them. Day52 Switched LED lights to a more red spectrum and switched from dualspectrum on the HPS to Superbloom hps instead for the last weeks.. I started flushing two of them so i can give more room to the others Peace out and remember to see the video :D
Likes
103
Share
Hi everyone, brothers and sisters of Weed! The beautiful glazed wedding cakes are strengthening quite well, their sprouts are beginning to escape from the net and their leaves do not show any kind of growth problem .... we continue like this!
Likes
216
Share
@Ju_Bps
Follow
For this grow I've used, For the growth 1 Mars Hydro TS1000 (150 W) 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 11l geotextile pot 20 Hours On, 4 hours off light For the soil I've used plagron light mix + batmix in the down For the blooming 1 Mars Hydro FC300 (300W)@75% 2 fan 15w Extractor + Filter 150mm 1 Mammoth lite 60 box 1 timer 11l pot 20/04 After harvest, I've put the stuff in a room with 1 fan 15w Thanks for all my friends! And again thanks @Fast_Buds , and Mars Hydro, @Coco_Pan2022 ❤️❤️❤️
Likes
24
Share
@Spazmagi
Follow
11/3 - Today is technically the first day of Week 5 and also the first day I could see a visible drop in her water level since her last check-in (~12 hours apart). As a result, her ppms shot up to around 800. I diluted the solution with straight tap (7.5pH, 170ppm) since her pH was registering around 5.3. This brought her up to 5.6pH and 670ppm (1.0ec + tap, 500ppm of nutrients). I would have liked to adjust her pH more, but the water level ended up at the bottom of the basket. I'll adjust further as necessary. The other day while attempting to LST her top branches, they ended up snapping off, so I just topped her down one node and broadened her other LST to make her as squat as possible. Once I am able to find a suitable individual ScrOG screen, I will put it on her. 11/4 - I wasn't even planning on doing an update today, but I want to note a few changes. The first of which is a visible difference between her foliage density in a span of 36 hours. Her root bundle is over a foot long and getting more wound up every day. I removed her LST ties in order to take advantage of the ScrOG screen apparatus (see notes below). After lights came back on, she measured 645ppm and had another notable drop in water level. Currently, I am preparing another nutrient solution that closely matches what she is feeding on now. I will be upgrading her to a 5 gallon bucket. I will be aiming for 1ec of nutrients/additives (500ppm + Tap on my meter, Hanna Primo .5 conversion). Tap measured 180ppm, so target ppm would be 680. Later that same day... So I finished upgrading her to a 5 gallon bucket before I actually got done writing the update. Added one photo showing new 5 gallon setup. Solo ScrOG test mk1 - In an attempt to do a ScrOG, but maintain control over each bucket, while still having relatively easy access to each reservoir, I decided to throw together this little contraption. I removed the lowest complete segment of a tomato cage, leaving a short "tail" beyond the lower ring to act as a peg to insert into corresponding holes in the lid. The lower ring is 10" in diameter and the upper is approximately 12" in diameter. Each ring is 11" apart. I would prefer to have a shorter segment, but I haven't worked out exactly how to do this yet. I would prefer to set the screen height at around 6" above the bucket instead of 11". This will have to suffice for the time being while I let my latent conscious work out a solution or one is provided by the community. Above each cage will sit a coated wire fence with grids measuring ~2"x3", as shown in the above picture. 11/5 - Uploaded short video showing Solo ScrOG Apparatus in place. Screen height currently set to 6". Thanks for stopping by my garden, and, as always, Happy Growing!
Likes
55
Share
@Max1973
Follow
Well, this was a interesting first journey.... the buds finished drying today, 5 days drying, added pics and vids. Just curing to go.... ah nice buds :) Edit: i forgot to mention i went over the buds when i harvested them, and checked / removed any impurities, like gnats caught in the sticky bud.... picked em clean with tweezers... 👍 Edit: needed to air/dry out the buds abit more, and get some Boveda Humidipak for curing.... it's looking good... i'll update with some pics of trimmed, cured buds 😎 The buds turned out beautiful, pungent, pine, berry, citrusy, daytime, medical..... this has theoretical 1:1 - 21% THC, 19% CBD, so it's not going to give u a knockout high.... its medical grade 1:1 ....... side effects - happy, relaxed. haha :) I weighed it dry and came up with about 123.32g (4.35oz) ... i used abit of guesswork in the weight, not to concerned with weight, as to quality.... (that weight is with the test buds added in, +-15g.) .... you can guess the weight from the pics and vids, haha I really enjoyed growing this.... i found the website by looking up the seeds, decided to start a grow diary, it's my first grow, i made alot of mistakes and growdiaries really helped alot, joined a chat group with some other really good growers. Edit - Day 111 - added vid/pic, Been curing for a week, burp and roll em abit twice a day....... smell and taste nicer each day, 👍 Edit - Day 112 - added good vid of trimmed up test bud, beautiful ...... I hope You enjoyed the Diary..... Good Buds 😎
Processing
Likes
52
Share
2017-09-11. Kl 12.00. Week 3 starts. I have cleaned the whole room for the new week and gave the girls water and nutes. Added videos and pics. Girl is 10 cm high. -------------------------------------------------------------------------------------------------------------------- 2017-09-12. Kl 10.00. New pic and video. --------------------------------------------------------------------------- 2017-09-13. Kl 22.00. Added new video. --------------------------------------------------------------------------------------- 2017-09-15. KL 10.00. New pics and video. The girl is 14 cm high. --------------------------------------------------------------------------- 2017-09-16. Kl 10.00. The girl is starting to grow little better now and i hope she is picking up the pace. Added new videos.
Likes
3
Share
Now in week 5 of flowering. Increased the LED power to 420 W and watering about 3 L per day. The strains from Fast Buds are really fruity and aromatic.
Likes
7
Share
05.11.2025-BT3 Es geht los ! Die Blüte wurde offiziell eingeleitet. Heute wurde nach dem Düngeschema für Blütewoche 1 gegossen und zusätzlich das SCROG-Netz eingespannt. Jetzt heißt es abwarten und gespannt auf den Stretch freuen! Bis BT21 wird nicht mehr geschnitten – dann steht das Lollipopping und eine ordentliche Entlaubung an. Ich hoffe, dass alles reibungslos läuft und keine Pflanze zwittert.