Likes
Comments
Share
@Daweed83
Follow
I was worried because the buds had a very different aspect compare to the other plants but I guess its their genetics that makes them buds with more pistils. they getting very fat now so I’m not worried anymore ! Please let me know if there anything wrong 🖖🏽🖖🏽
Likes
47
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
9
Share
@Flixus
Follow
Willkommen zur BW1, die Pflanzen befinden sich mittlerweile im Stretch und haben das SCROG Netz fast erreicht. Ab nächster Woche werde ich dann beginnen müssen, die Triebe nach und nach ein zu Flechten. Leider hat #2 nicht die selbe Höhe, aber da kann ich mit leben. Die ältere Pflanze zeigt leichte Anzeichen von Überdüngung, auch das ist nicht so tragisch aber wertvoll für die nächsten Grows. Mittlerweile hat GHF auf ihrer Seite die Empfehlung auf 3G/L Substrat angepasst, ich würde jedem empfehlen erst einen Teil und ab Blütenbildung den Rest der gesamten Düngermenge zu geben. Mittlerweile lässt sich auch ein leichter Geruch im Zelt vernehmen.
Processing
Likes
17
Share
@kcartel
Follow
good flowering, everything is stable, a lot of inflorescences appeared this week, next week it is planned to remove the lower leaves. We had to tilt two branches from the middle, as they stretched out very much and there was a risk of burn, we are waiting for 7 weeks!
Likes
3
Share
I hope you will enjoy my work, the peaks are to dry, share a few days for comments or advice, or questions please write to me.... !! peace & love
Likes
176
Share
Heute Abend wird die Gute zerlegt und ihrer eigentlichen Bestimmung zugeführt. Erntedankfest Updates folgen... 21.06. Direkt an der Lady den Grobtrimm gestartet, ist für mich so angenehmer.. Gleich wird sie geerntet und aufgehängt. Die Luftfeuchtigkeit ist momentan recht hoch, der Luftentfeuchter läuft.. Hab die Triebe getrimmt und einzeln ins Zelt gehängt, Funzel aus, Abluft volles Rohr und Venti an...jetzt heißt es warten? Aber der Duft der beim Trimmen entstand, erinnert an diese gelben Lutschbonbons, super lecker👌 25.06. Nach einer Woche im Zelt zur Trocknung nun getrimmt und ins Glas getan
Likes
29
Share
Un altra settimana è passata senza problemi...grazie alla mia perseveranza nel curarla e debellare i ragnetti Rossi che bastardelli mi sono arrivati anche dentro al box... sicuramente c'è li ho portati io involontariamente quando sono andato a vedere delle piante di un amico che erano impregnate di ragnetti e ragnatele sui fiori....vabbè ora devo sbattermi un po' più ma non lascerò che mi rovinino la mia terapia 💪👍🙏🕉️🙏... Boom Shiva Shankar 🕉️ belle le mie coccinelle 🐞 che mi tengono pulita la mia terapia
Likes
5
Share
just about to go into week 9 and i noticed a few midges or so i thought.as the next day there were more ..i noticed that they seemed to be coming out of pot bases.upon closer inspection these turned out to be fungus gnats.(never heard of them. Never had a beastie problem).No idea how or why but problem seems to be sorted as you can see from photos ,sticky traps and plant magic Bugicide
Processing
Likes
66
Share
What a week, So I did a run off test end of last week and they was really high, but I would like to address the DNA Mills cork as I am using this in just one pot (A) to try it out I used 3/4 (B) to my normal coco in another pot 50:50 (C) in another at a 1/4 (D) then when just my normal coco mix ( E) and I havent seen much difference other then the retention of water... UNTILL NOW. So evaluating all my reading I have from run off this is how it WAS sitting running water with an EC 0.7 Ms/cm A - 2.4 Ms/cm B - 2.3 Ms/cm C - 2.0 Ms/cm D - 1.9 Ms/cm E - 1.5 Ms/cm So my conclusion is that I dont like the cork maybe I'm using it wrong somehow I dont know but in my experience, it seems to be grabbing hold of all the salts and not letting go, so this week I ran litres and litres of water through them to bring them down I can only get A down to 1.4 Ms/cm and am struggling to get it any further down does anyone have any suggestions. As for the deficiency I was supposed to I produce the PK booster beginning of this week and couldn't with the run off being so high, well that's what I'm hoping anyways 😂. Plant A doesn't seem to be swelling like the rest (front left in pictures) I'm hoping this is down to genetics if anyone else has any thought I'd love to hear them. Thanks for dropping in and reading, Happy Growing! 👊👍
Likes
66
Share
@McBubatz
Follow
Soweit alles 👍 Wetter is die Tage auch ganz gut so das sie jetz auch ordentlich Sonne draußen tankt😁 Denke 1-2 wochen braucht sie min. noch.
Likes
39
Share
This week basically was just feeding the soil with molasses ( 5ml per 1 litre ). And Reverse osmosis water. Environment control during this stage is of high importance. Since the plant is moving from its adolescence to teenagehood, so to say lol, it's really vital to keep the conditions steady. Other than that, this week was a breeze. Thanks to any and everyone that's viewing my diary, I do appreciate the support. 💚🌿
Likes
13
Share
@gr3g4l
Follow
No me pude estar de hacer una nueva poda de bajos, tercer y cuarto nudo a todas. Sigo batallando contra la araña roja :-( No hay manera de deshacerme de ella al 100% y cuando me sube un poco las temperaturas vuelven a salir. También podria haber ayudado porque programé mal el temporizador del ventilador hace un par de dias y estubo parado por la noche y coincidió también durante unas horitas mientras aun estaba encendido el ATS. , esas horas la temp habria subido hasta los 29 -30ªC. Volví a aplicarles otra con Solabiol por segunda vez, por arriba y por el en envés de las hojas , todo bién mojado. Como se puede ver en alguna fofto del seguimiento, en la semana 7 por ejemplo, antes tenia un tablón de madera con muchos abujeros para facilitar que suba el calorcito de los calefactores pero no las tenia todas al ser madera, me temo que al ser madera era más difícil de desinfectar bién el armario y obté por poner unos soportes elevadores metálicos con sus abujeritos. Creo que empiezo a estar enamorado del ATSPro , deberia esperar a que termine la flora para no tirar cohetes si pero por lo que voy viendo me está ganado mucho. Llevaba tiempo cultivando con COBs , anteriormente con LEC y anteriormente al LEC con PHS y esto es en diferencia lo más cómodo y que mejor reparte la luz y por lo que voy observando una mejor o mayor penetración lumíca , creo que esta iluminaria me permitirá que los cogollos arranquen de más abajo. toquemos madera. Esta semana empecé con el Delta 9 en el riego, las veces anteriores habian sido via foliar. terminada la semana creo que ya podemos asegurar que variedad es más vigorosa y cual predomina más el feno índico. Como puede observarse las Animal cokies ganan en altura con una distancia internudal mayor. Las OgKush todo al contrario, bajitas y una distancia internudal menor. Por lo que hace a la altura de las plantas las OGK rondarian entre los 70 ctms y las más altas que vendrian a ser la Animal C unos 90ctms. áprox.
Likes
18
Share
June 28 - They are doing great, We switched to the recommended amount of nutrients for flowering, Also 2 air stones I ordered have come in so now those are on 24/7 with the nutrient water in a 5 gallon bucket. June 29 - Still just growing away, I am still feeding roughly 3L per plant of nutrient water every 24-36hr depending on how dry they feel. June 30 - Totally forgot to take pictures/videos today. I gave them there daily watering and they are still just growing away. They are in flower now I believe! July 1 - Awesome to see this amount of progression. Tons of hairs and a decently even canopy. There is a small smell coming from in the room! July 2 - Again I forgot to take pictures, But as always they are still just growing away. so far so good! July 3 - Tons of growth and they are starting to become uneven. I don't have a ton of time so I think I will leave them for another week before doing some LST or HST. Tons of colas forming, lots of hairs and they are starting to have a heavier smell! So far so good! July 4 - Same thing as yesterday, still growing away, Ive turned the lights up to 100% now and I have removed the SF-1000 as I needed it for another project! (be sure to check out my other diary's which I will be uploading today!
Likes
17
Share
Sono contento e difficilmente sono contento. Cinque piante identiche e sembra di fumare la vera gorilla glue con note dolci quasi a ricordare delle caramelle. Una pianta invece ricorda di più la zkittlez. Davvero contento di aver scelto questa casa 😊
Likes
9
Share
@Rizik86
Follow
Day 79 - Added 7 mL of CalMag Micro Grow and Bloom. Added 7 mL of each additive. PPM is 706. Day 81- Using noticeably less water now. Checked PPM 475. In moving the plant to water, a small branch broke. Trichomes are mostly clear. Started to dry it as a tester for rest of the plant. It takes 7 days for me to dry the tester at 70F and 40RH. Not ideal temp but that is how it goes. Day 82 - Might have seen first amber trichs Day 83 - Added 10 mL of Overdrive. PPM is 430. Trichs are mostly cloudy. Hairs are 80% orange. Branches are leaning from the weight. Day 86 - Added 5 mL of CalMag Micro Grow and Bloom. Added 5 mL of each additive. PPM is 588.
Likes
11
Share
The trichomes are heavy and she is really pretty at this point.She still has some clear trichomes as some are cloudy.Ill let her go a lil longer and keep pounding her with 80 percent light intensity and maybe one more feeding of Plagron and some bud candy.
Likes
24
Share
Hello folks ! Back from holidays, the plant keeper did not so bad ! Following recommendations from a piece of paper and readjusted after sending pictures. All the plants on the drain tables had recovered well from over feeding. Only 2 plants didn’t recovered, coming from another seeds bank and growing in pots with cups. White Label genetics are suitable for new growers and will forgive wrong moves like Nutrients excess as you can see 😉 Week 2 of flowering, some plants suffered from over feeding around week 6-7 of Veg. But everything should be fine now. Flowers start to show. I had to trim the legs and small shoots not reaching canopy to avoid any waste of energy for the plants. Canopy is dense and thick, I feel like playing at Jumanji sometimes 😅😂 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)
Likes
7
Share
@MrSpunk
Follow
This week we start with some LST... The second Runtz didn't make it, so I've thrown it away now.
Likes
8
Share
Hello Diary, The first week of vegetation on my small farm has ended and so far everything is going well. In order to better remember the arrangement of the plants, they are arranged alphabetically from left to right. On the left is Apollo, in the middle is the Milky Way and on the right is Titan. Milky Way F1 is developing and growing nicely. It grew 7 cm and I am generally satisfied. What worries me a little is discoloration, i.e. light spots on the leaves. I'm not sure about the cause, but maybe it's genetics. I will see and follow what happens. Watering was not frequent, considering the size of the pots, there is a lot of moisture in the ground, so I watered it every 5 days with a liter and a half of water. In the first week, I didn't add any supplements, considering that I mixed a lot of supplements into the soil. Conditions on the farm are satisfactory. The humidity is slightly higher than 50% and the temperature is around 25 degrees. The light is set to 18/6 from the first day of vegetation. I took pictures on the first and last day of the first week, just to see the difference in a week. Here's a quick recap of the week. 30/04/2023 - Day 1. Watering and photography. Officially, the first day of the growing season. Prepared 5 liters of water, lowered the pH. at 6.0 and with that amount watered the Milky Way F1 and its two roommates with about the same amount of water. Milky Way F1 - 4 cm 05/05/2023 - Day 6. Watering. The procedure is the same as 5 days earlier. 06/05/2023 - Day 7. Photography. End of the first week of vegetation. Milky Way F1 - 7 cm That's all for this week, see you soon and thank you all for your support.
Likes
37
Share
Explosive bud development the past week. These girls are gonna be STACKED! I wish every plant I ever grew could grow like these! Absolutely beautiful look to these ladies! One plant is further along than the rest, but probably still a couple weeks from harvest. I truly see these plants going 110 plus days from seed. Im still on the same watering regimen. Feeding every water, but definitely done with any and all nitro for this grow. Feeding general hydro micro and bloom, at full strength, and feeding them big bud by advanced at 5ml per gal. Also, giving them a full dose of recharge every 7 days. They love it! I don't have a single burnt or rust colored leaf on the entire grow. Thats impressive under an HPS on 1000 watts! Love love love these plants and everything about them! The plant that is a couple weeks ahead of the others (planted the same day), the buds are absolutely rock hard! Gonna be some dense, sticky, resinous, absolutely killer medicine!