FD36 - True to form I completely forgot to take any pics before the lights were out. The third week in a row. I'm detecting a pattern... lol FD37 - Pics! FD38 - Today, I was proactive in trying to prevent botrytis (budrot) since I have had problems in the past when temperatures and humidity get too high in late flower. I started with defoliating hard by removing fan leaves. That should lower the humidity in the tent as there are fewer leaves to transpire moisture, and also increase the airflow around the buds. Finally, I put my small humidifier in the tent to further lower the humidity. FD41 - The anti-humidity measures are working. The tent went from an average RH in the high 60s to the high 40s. (The average RH in the last 24 hours was 48.9%.) I'm happy with that, which should be enough to avoid budrot. Better safe than sorry, so I did additional LST to open up the plants and thus increase the airflow around the buds. It's also helpful to increase light penetration, so win-win. FD42 - We're at the end of the sixth week of flower, and things are chugging along in the tent. The buds are slowly fattening up, but it will take some time before they are done. There isn't much to do in the tent this late in flower besides watering. Today, each girl got 2.5-liters of water @ pH 6.5.

So we are approaching the end of week 4 and she is in 100 percent flower mode now, she's looking a touch pale as I gave her a water through to check the EC which came out at 1.0 and since then I've been waiting for her to dry out and now she is on full dose of everythin which is an EC of 1.9-2.0 The stretch finished about Wednesday/Thursday this week and i would say ive still got a bit of head room so the next ones I might let get a bit taller Hopefully in about 4 weeks she will be ready for the chop, im anticipating some proper weight and resin production in the next 2 weeks 🤞 Happy growing everyone!!

Finishing up this run. Two plants have been chopped and I’m waiting on the final three. Pulled the two earlier than I wanted but it’ll just allow me to learn more. Hoping to chop these next week. All about the fade.

New start of a week FLOWERING This grow i have seen it all from giants to dwarf that doesn't want to flower to a mutant call mohawk ethos you name it i gots it's lmao couple week ago trow out a male but still all that don't matter because what i have is great to me maybe not perfect but i ain't perfect either 20/4/22 The smell coming out of the tent is one tropical garden very happy so far with results and there hopefully bulking up Will be posting more photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

For this grow I kept my setup a lot simpler than last year. Going with Jack 47 because, well, reviews are awesome and we've had success with Sweet Seeds germinating well. From the pics and videos you can see I've got a simple bucket for the plant with no air stone, pump, or other shit in the plant bucket. All that is in the reservoir. Should make it easier to clean, flush, etc. I'll be able to just pop the lid off (with plant in the net) and put it on a clean bucket with pH balanced water while I clean the rest of the system, then hook it right back up. I also over-designed so I could add a second grow bucket if I want. Don't have space for that at the moment but non-loadbearing walls are easy to move, right? Using General Hydroponics for nutrients and Hydroguard for good measure. Knock wood I'm not jinxing things by posting before I have seedlings.

Looks good! Lots of growth in 1 week, double in size! 🤩 Good growth! They look perfect! Small pistols in arm pits, hanging by night Sunday, one starts flowering One very big side node, pops out and a side node missing 😁 strange behaviour 😁 Check out my ladybug 😍🤩❤️ One of the gurls, is just growin in height, close to zero side nodes 😯 she goin to look like really awesome! 😛🤩😍

Day 62 Its time to switch the light off. The plant stay vor 72h in the dark, to reduce the chlorophyl. And than is harvest time

Alles entwickelt sich sehr gut, nur hab ich heute 3 Pollensäcke gefunden und gleich entfernt. Hoffe das nicht noch mehr nach kommen sonst muss die Lady ausziehen. 17.07 Es wurden sechs weitere Bananen entdeckt und entfernt. Komischerweise nur an den oberen Buds, Ich hoffe, es werden nicht noch mehr, aber bisher lässt sich das Problem im Zaum halten. Ansonsten reagieren die Pflanzen sehr gut auf die Erhöhung des Düngers nach Schema

Lampe 100% Sooo… die Mädels sehen richtig gut aus. 🌱🔥 Die Blüte hat sich prächtig entwickelt, schön kompakt und richtig harzig. In der letzten Woche sind sie gefühlt explodiert. Einige Colas ziehen sich jetzt schon ca. 30 cm den Stängel entlang. 💪 Ich bereite jetzt alles auf die Ernte vor, Ende der Woche ist es soweit. Eventuell nehme ich vorher nur die Headbuds runter. ✂️ Die mittlere lasse ich allerdings noch weiterlaufen, sie hängt hinterher und bekommt deshalb ein anderes Gießschema, während die anderen schon in den Flush gehen. 🌿 Ende der woche wurde teil geerntet Mo: Gießen: #1:#3 4L-6L je Dünger für Links und Rechts: Canna Coco A&B = 1 ml/L CalMag = 0,6 ml/L Cannazym = 0,5 ml/L Boost = abgesetzt. pH: 5.8 EC: 0.8 Gießen: #2 4L-6L je Dünger für Mitte: Canna Coco A&B = 2 ml/L CalMag = 0,8 ml/L Cannazym = 0,5 ml/L Sugar Royal = 0 ml/L Green Sensation = 1 ml/L pH: 5.8 EC: 2,1 Di: nichts Mi: Gießen: #1:#3 4L-6L je Dünger für Links und Rechts: Canna Coco A&B = 1 ml/L CalMag = 0,6 ml/L Cannazym = 0,5 ml/L Boost = abgesetzt. pH: 5.8 EC: 0.8 Gießen: #2 4L-6L je Dünger für Mitte: Canna Coco A&B = 2 ml/L CalMag = 0,8 ml/L Cannazym = 0,5 ml/L Sugar Royal = 0,8 ml/L Green Sensation = 0,8 ml/L pH: 5.8 EC:1,9 Do: nichts Fr: Gießen: #1:#3 4L-6L je Dünger für Links und Rechts: Canna Coco A&B = 0,8 ml/L CalMag = 0,6 ml/L Cannazym = 0,5 ml/L Boost = abgesetzt. pH: 5.8 EC: 0.8 Gießen: #2 4L-6L je Dünger für Mitte: Canna Coco A&B = 2 ml/L CalMag = 0,8 ml/L Cannazym = 0,5 ml/L Sugar Royal = 1 ml/L Green Sensation = 1 ml/L pH: 5.8 EC:2.1 Sa : nichts So: Gießen: #2 4L-6L je -nur wasser mit pH5.8 -Teil geerntet Gießen: #2 4L-6L je Dünger für Mitte: Canna Coco A&B = 2 ml/L CalMag = 0,8 ml/L Cannazym = 0,5 ml/L Sugar Royal = 0 ml/L Green Sensation = 1 ml/L pH: 5.8 EC: 1,9

Floración 🌺🌸

Week 4’s in the box and these plants are lightning quick outta veg. We’ve confirmed the presence of at least 3 males and 1 guaranteed female so far. They’ve all started to hit vegetative maturity in full stride so it won’t be long until we look to flip. A couple have been topped once more for the sake of additional colas and if we get lucky, the remaining females may be suitable for a scrog. Either way, can’t be much happier about how well they’re growing at this stage. Here’s hoping it remains so through flower🤞. ***Notes: strongest plant to this week is first confirmed female. Prob a prime candidate for cuts and back pollination with the F1 pollen dump.***

*Early Flower 09/10* (2) Fastbuds - Mimosa Cake Auto Aggressive LST was applied for even light coverage. Smaller-Lagging budsites and bigger fan leaves under net have been removed. Slight increase in nutrient feeds, thus far 0 signals of deficiencies. *Mid week update - 09/13* Both plants have grown approximately 6 inches in height Early flowering continuing to progress accordingly Half a gallon increase in water feed (Nutes included) *End of week recap 09/16* Mimosa Cake (Auto) - Both in week flowering accordingly Small increase on nute feeds - Moderate increase in filtered plain water feed (1.5 gallons ) *SEE END OF WEEK RECAP VIDEO*

7/17 just feeding once a week. added worm castings and took a clone

Week 1 of flush. I am watering her with pH'd water (5.5-6.5) 2-3 times daily. I am watering until roughly 50% runoff though not measuring. She has been fading for the last 2 weeks already and so her leaves are slowly drying out and dropping off daily. Gorgeous colours coming out of her though which makes flushing worth it for the sight alone.

Finally starting to look like she might be finishing, but every time I think that, a bunch of new pistils shoot out. Trichomes are getting more cloudy but still a lot of clear ones. Lots of stacked calyxes now packing on. Remember this plant has already had 5 zips of dried bud removed at 11 weeks! I have not changed the reservoir for 4 weeks, I topped it up with a little bit of extra nutrient after two weeks but there seemed no reason to do anything else, she has not been using much recently ppm is constant at about 800. Only now beginning to see some leaves dying. I'm going to let her go for as long as she wants.

Hey everyone 😃. Week after week, both phenotypes become more beautiful and beautiful 😍. Pheno 1 is clearly my favorite color klar. Let's start the week: Flowering day 49 Both plants were checked for health and the trichomes were checked with a microscope. (70% milky, 20% amber and 10% clear. Flowering day 50 Today both were poured with 1.2 l each, of course now without any sewing material so that she would use the rest until the harvest 👍. Flowering day 51 Today both were checked, the humidifier refilled and fresh osmosis water filled into the tank. Flowering day 52 Both were checked for their health and in the end time for mold, everything looks great 😍👍. Flowering day 53 Again 1.2 l per plant were poured and the trichomes checked, it will run out for about 10 days before it comes to harvest. Flowering day 54 The humidifier was refilled and the tent cleaned. Flowering day 55 Again both were carefully checked, osmosis water was filled in the tank, and everything was cleaned. That was the week before last 👍. Next week comes the last update before the harvest update 😎👍. Until then, I wish you all the best, stay healthy and let it grow 🍀👌 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Day 21 of flowering did defoil the lady’s. No hermaphrodite showing up. Did a compost tea today. Corn is sprouting for tea. Did covercrop to get some fresh greens for the hcompost after the run. The buds are stick as fuck. Looking forward for the next and last defoil in week 5.

Waiting for their flowering.😎