Likes
Comments
Share
@Truta
Follow
A planta fastberry apresta uma anomalia na metade da planta, com folhas atrofiadas e brotos nascendo viradas para baixo, não sei o que possa estar acontecendo, se alguém tiver uma dica provável. Obrigado
Likes
22
Share
D83 F36: Hello everyone! I apologize for the quality of the photos, I really have a shitty phone! Apart from that everything is going well! The plants are growing very well, still no signs of deficiency. I started cooling the box at night 2 days ago and the colors are already appearing! I upgraded my LED panel to 600w F33, I was sure I was correct with 400 but I noticed that the flowers were not developing correctly The smells are really incredible, more and more marked! I have a little crush on the code red #1, a smell of strawberry candy, cream and syrup. the white runtz x Hollywood is very very special too! a very runtz smell, with a very marked smell of marinated ginger and lemongrass! very special, it's also the one that makes the biggest heads, incredible I did a big defoliation (schwazzing) a few days ago and they recovered very well. I moved the plants again, I'll put the locations below. I will apply tco F40 in my flowering TCO, I put: - kelp hydrolysate - epsom salt - bat guano - mealworm guana - castor bean shell ash - palm ash - vermicompost - blackstrap molasses - elycitor -Yeasts Saccharomyces Cerevisiae Bottom right: Papaya Bang Bang #1 Bottom middle: LA Vanilla cake #2 Bottom left: Papaya bang bang #2 middle right: cherry gar see ya #4 clone middle: white runtz x Hollywood middle left: code red #2 Top right: Code red #1 Top middle: B-45 Top left: LA Vanilla Cake #1
Likes
6
Share
@Dengued
Follow
Day 49..moved the plants last week so they have more room. Stretch is slowing down and starting to bush out with loads of bud sites. No signs of any deficiencies yet, even though only feeding organic spirulina for last month.
Likes
Comments
Share
Just water some more everything is still going smoothly Doing a little topping and cleaning up the plants
Likes
10
Share
Been on 12/12 for about 10 days. Some of the plants are starting to shift and show sex. Can't tell for sure what's what. But in the next couple of days I should have know for sure
Likes
8
Share
I soaked the seeds for 24 hours in a mixture of BioAg Ful-power, 6.3 Ph water & aloe Vera. I then inoculated the soil with the mixture of ingredients I listed above. After that I placed the seeds 1/4” into the soil & placed them under the humidity dome after spraying them with my pump sprayer. Current temp is 75 degrees F & Humidity is 89%.
Likes
18
Share
Seedsman Seeds Germination Report - Run 01: The White OG Journey Kickoff to Germination: The Start of Something Great! Welcome to the beginning of this adventure with The White OG feminized seeds from Seedsman Seeds. Excitement is in the air as we’re searching for strong, resilient plants, and this journey has all the best tools and tips. Starting with five seeds, we’re aiming for a solid beginning and maximum potential. Let’s explore every step in detail to make this grow as robust as it can be! Germination Process: Tools of the Trade TheCannaKan: The Ultimate Germination Gadget I’m thrilled to share my love for TheCannaKan, a little germination wonder! This tool is essential for any grower who wants to start their seeds with precision and care. I noticed rapid results in just 24 hours, with the seeds showing signs of life. At about 32 hours, I transferred them to the Root Riots, which brings us to the next exciting stage. Why I Love TheCannaKan: • Quick Results: Seeds sprouted rapidly, minimizing wait time. • Consistency: Keeps moisture levels optimal for uniform germination. • User-Friendly: Simple yet effective for both new and experienced growers. Root Riots and Their Role in Root Development After sprouting, I placed the seedlings into Root Riot cubes under a dome. Root Riots are fantastic for stabilizing young plants, providing an airy and nutrient-friendly environment that promotes robust root growth from the start. Benefits of Root Riots: • Root Aeration: Soft yet structured, these cubes support root expansion. • Moisture Retention: Holds just the right amount of water for growing seedlings. • Enhanced Root Health: The cubes are ideal for preventing damping-off and ensuring healthy, white roots. Nutrients to Kickstart Growth: Aptus Holland Regulator and Startbooster To give the seedlings a perfect start, I added Aptus Holland’s Regulator and Startbooster (1ml/L each). This mix promotes early root and stem strength, giving seedlings the ability to absorb light and nutrients more efficiently. • Aptus Regulator: Enhances plant resilience, aids in nutrient absorption, and promotes early vitality. • Aptus Startbooster: Adds a balanced mix of growth hormones and nutrients that are ideal for the early stages, encouraging healthy roots and faster seedling growth. Light and Environment: Future of Grow FOG LED with TrolMaster Tent X Controller I’m using a Future of Grow (FOG) LED at 600W, but keeping it dimmed down to around 200 PPFD. This setting is controlled by the TrolMaster Tent X Controller to give the plants the perfect start without overwhelming them with intense light. Controlled lighting helps seedlings to develop without stress, encouraging healthy growth and internode spacing. Shoutouts: • Future of Grow LED: High-quality, efficient LED light that adapts well to seedling and veg stages. • TrolMaster Tent X Controller: Reliable and intuitive control over light, humidity, and more. Perfect for a hands-off, efficient environment setup. Observations: One Seedling Takes the Lead At the end of this germination stage, it looks like one seedling has emerged as the strongest, while the others may need a few more days. Patience and observation are key; some seeds naturally take a bit more time to sprout. I’ll keep monitoring these with hope, allowing each seedling its own rhythm. Grower’s Notes and Tips • Consistency Matters: Germination is all about steady conditions—consistent moisture, gentle nutrients, and stable lighting make all the difference. • Document Everything: Keeping a log of each step (like this one!) helps track growth patterns and provides valuable insights for future grows. • Stay Positive and Patient: Not every seed will sprout at the same rate. Trust the process and remember each plant is unique. Community Shoutouts Thank you to everyone who makes this process smoother and inspiring—TrolMaster, Aptus Holland, Future of Grow, and Seedsman Seeds for amazing genetics and tools, as well as the growers’ community who share insights, tips, and encouragement along the way. Next Steps Now that we’re through germination, we’ll move into the early growth phase. I’ll keep documenting the lighting adjustments, nutrient changes, and growth patterns of each plant, especially that eager seedling leading the way! Growers Love, and here’s to a strong start for the future of this grow! 🌱 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚
Likes
7
Share
Another week of flower in the books. Plants look great- regular feeding on Saturdays minus a few things. I added some big 6 today; this week will be one of the last few weeks of feed before the ripening stages. Haven’t put the scope up to the trichs yet but I know we’re nearing the end. Lowered the light a notch to help cool the room and show the plant it’s near its life cycle. Ppfd-700 Vpd- 1.4 - 1.5
Likes
4
Share
Buds are very resinous, but due to the stretch they are very spaced between each other. Also I'm getting trouble to fatten them up. Seem airy and the tips are drying a litle bit.
Likes
4
Share
@Fergie
Follow
Hey guys so here are my 2 rippled haze lady's and are looking awesome can't wait to see them beef out another week and I will look start to begin topping them and get some structure going .. til next week
Likes
58
Share
@Coopmc
Follow
To flower we go the pollen doner has been in for a week and STS spray every 5 days
Likes
25
Share
@valiotoro
Follow
Exceptional! This strain’s a trichome factory no matter the pheno! ❄️🔥
Likes
16
Share
@Apolloo
Follow
I haven't been able to update this for a few weeks and now it's blooming! One has poorly colored leaves, but generally good growth. I've been giving them 2 liters of water every two days and adding PK as well. Is there any problem if I continue to add PK?
Likes
8
Share
@Max1973
Follow
Day 63 - lookin good.... haha.... um, tanks stabilized, ph 5.8 - ppm 1200 .... she's feedin alot..... buds are fillin and lotsa white furries.... listed the nutes and amounts etc.., but i'm kinda feeding her as she needs.... so every few days she is drinking 2 lts +- and i'm just mixing up a neut solution in a 2 lt bottle every day or 2 ..... sometimes she just wants abit of water...... Day 64 +vid....shows her deep green and gloss... abit of crystalic :) Day 65 - vids pics.... trimmed her, and abit of bending.... Added blood and bone.... she's stretching alot, 60cm+ ........ Day 67 took all the early buds on all the stringy 0ff shoots.... Poor lighting vids, but don't want to mess with her flowering, :) 👍😎👊
Likes
18
Share
A bit frustrated that I don’t see flowers yet :( I defoliated quite a bunch of leaves that were taking all the space (see pictures). I hope flowers will appear soon after it!
Likes
22
Share
@Jahngo
Follow
My first attempt of growing with my own DIY setup. Specs : - PC box 19x42x43cm (after a few weeks I changed it with a bigger carton box) - 4 x Bridgelux Vero 10, 3000K, 9.1 Watts, 80 CRI, 270mA, 143Lm/W - Mean Well HLG-60H-C350B 70W LED driver - 100k Linear Potentiometer for dimming lights - Aluminum profile 30x7cm for mounting LEDs - ESP32 Dev Board - DHT22 temperature & humidity sensor - 2 x Noctua-NF-S12A for ventilation with PWM control by microcontroller - 3lt pot - Blynk IoT app for remote control Started germination of 1 feminized Northern Lights seed from SensiSeeds using paper towel method. Sprayed with some water and store it in small plastic food container. Seed popped after 24 hours and after 48 it was ready for pot. Unfortunately didn't take any photos of the process.