My GG4 mother plant is doing better than I could have ever hoped for,I have never grown a plant this bushy in my entire life!!! She reeks of skunk and burnt rubber already at the end of week 1 of flower. I'm really hoping she finishes before I go on vacation october 9th 🙏🙏🙏🙏🙏🙏🙏🙏🙏 I have been moving my plants around with my new plant dolly and chasing the sun around my entire yard daily in hopes i get some bigger more dense buds😅 we shall see

Germinated for 24 hours in a glass of water, 48 hours in a paper towel and then I planted them into biodegradable seedling pots. Northern Lights looking a bit ahead of the Dosidos seeds but that was expected I’ve grown Northern Lights before and they sprout real quick. One of the Dosidos’ first true leaves is looking a bit wonky but we’ll see how it goes I suppose.

Week 7 seems to be going fine from my house and then I go to the grow 🤣 well fukc me I’ve ran into few problems let um get abit too dey for their liking the week leading up to Christmas / gave um a good feeding with week 7s nutes and peeled back abit of the fan leaves to get more light around , humidifier broke on us didn’t notice for 2 days so tent was 70 percent humid when gone to check , new humidifier replaced and back on track as I said earlier peeled back a few fan leaves think maybe a few too many plants started showing signs of stress soon after again these are autos and I think it could of stunted if not heavily affected the end product also we noticed about 3 weeks into this grow we had way too many plants in the tent starting to see the effects off that now a lot of nonsense on the lower branches and only really the top Lola’s getting the light and the mass , all the same seed bar 4 plants and very differnt plants all in all , definitely not a strain that’s been mastered about half are tall and spaced out and the others are short and very stacked from my own eye I’d say the shorter and more stacked buds will be the ones bearing more fruit the taller ones look very skinny and airy still

Noch keine Ideen. Es gibt aber einige Gedanken und Erfahrungswerte, die definitiv folgen werden. Einige Dinge haben mich sehr enttäuscht und in zwischen weiß ich auch warum.

Hi folks, I'm coming here to start the process of ending this grow journal. I harvested about three months ago and the weed is definitely cured. Photos are about to come — I'm doing a real studio photo shoot for those buds, they deserve it! While waiting for the shots, I made some pretty damn dank hash temple balls using the iced water extraction method (solvent-free) with my little washing machine. It's a mix of the 8 strains I grew here — never ideal to mix different kinds of resin... but man, this is some serious dedicated work, so I'm making myself happy with that 14g shiny temple ball in the end 😉 Here are a few details about my process for you guys (and don't forget — you can do it with fresh material! Fresh frozen is always tastier. Also, the drying process is much more efficient and faster with a freeze dryer, but... you need the budget for that. I don't, so I go with the air drying method — check it out below): 1. Get your dry trim, then cure it properly for at least a month (I did 3 months). Smell it — mmh, sweet, dried to perfection. ✅ 2. Freeze it, delicately wrapped in a freezer bag. 3. Let a large amount of tap water sit for at least 24h to remove chemicals like chlorine, then use it to make plenty of ice cubes — don't be shy, especially if you're not working in a cool environment. 4. Prep your washing machine: add trim between two layers of ice, fill up with clean water (as much as you can, large vortex is better than a smaller one), then make it seat for 30 min (45 min for thicker buds) the time that the dried green material gets wet again. 5. Prep your filtering tools: catch bag, different mesh bags, spoon, etc. 6. Wash as many times as you can before green contaminants appear, as these lower the quality of your hash — don't hesitate to go up to 8 to 12 washes if the resin still looks clean! Important: each wash has its own specific duration, and they get progressively longer as you advance through the process. Frenchy Cannoli (a true hash legend) provides a detailed timetable for this — from as little as 30 seconds to 1 minute for the first wash, all the way up to around 25 minutes by wash 8. Make sure to follow that schedule rather than using the same duration for every run or running it too long the first wash !! It could breaks to quickly your precious material before you collect all the trich's and the quality would be lower in the end. 7. Collect the wet resin in the mesh bags with a frozen metal spoon, make patties with the resin, and let them sit over some towels in order to drain as much water as possible (place a tissue made for hash collecting over the towel). 8. When the patties are a little dry to the touch, wrap them as they are in the tissue and place them in the freezer for 48h or more. 9. With an iron strainer, microplane your patties over the biggest flat surface you can get! It's important that your micro pieces of hash dry widely and don't get too compacted. Any failure in the air drying process will nucleate rot, ruining your hash in the end and making it a poor product — eventually something to throw away. Sad when you think about all the phases of the process to get to this point! 10. So, in order to air dry properly, you must — it's not optional — lower the RH of your dry room to 35% or slightly below, never above and let it dry as long as needed until the material feels like dry sand. For myself, I found 10 to 15 days is ideal. The room must be very lightly ventilated (not directly on your resin!) and in complete darkness — the goal is to preserve all those delicious terpenes! Ideally, temps around 60°F or 16°C 11. Now that it's dry, collect your resin with a large thin spatula! Make a little mound between two layers of PaperHash, boil some water, and fill up a wine bottle with it! ⚠️ From this point on, to avoid exposing your carefully dried resin to a more humid environment — which could ruin all your hard work — everything must happen in the same drying room. Keep working at 35% RH until your temple ball is tightly and airtight wrapped in PaperHash. (And don't forget to drink water — it's dry in there! 💧) 12. Start to slowly press your resin. Magical moment. Finally.... 13. Press 3 times for 10 to 15 minutes in order to really decarb your hash — because that's what it's all about! Between each press, try as best you can to shape a patty... until the final press, when you'll be able to form that magical shiny temple ball (it only shines with gloves on, guys 😄) 14. You are now allowed to try it — for quality control purposes only, of course! 15. Because you want to age your hash for the sweetest 5-star smoking experience: wrap your temple ball in a large piece of PaperHash — if you can get that brand it's ideal, or another kind (check https://thepressclub.co) as long as it's organic! 16. Place the wrapped temple ball in a glass jar and store it in a dark, cool place. 17. Wait a minimum of 3 months before opening it. 18. Open, smell, touch — you'll be amazed. Roll it up with some weed or tobacco or both (I do both) / Or get a Hooka... you are smoking some true primo aged hash made by yourself! Taste the difference and realize all the path from choosing the seeds online until this first amazing puff ... 🙏 I want to credit my inspiration for making this kind of hash to the great Frenchy Cannoli, who has shared all his knowledge through amazingly rich tutorial content that you can find online with a bit of searching. 😉 Peace Frenchy 🕊️☮️

Hey growmies, Growth has been okay, however the growth is all variegated and funky looking. My environment has been spot on and the only nutrients this girl is getting is calmag, so I am left to assume this weird growth is a result of being snapped in half. Every node looks better than the last, i feel like she'll grow out of it. I just hope she doesn't enter flower right away as a result of the stress. I'm experimenting with a camera in there, see if it can provide me with consistent timelapse footage, if this week's timelapse is a bit weird, that's the reason. If you are wondering what the Hypochlorous acid in the nutrient list is, I'm using Calcium hypochlorite to combat pythium growth in my growbucket, as well as providing free chlorine for the plant to uptake. It's a very cheap and effective way to run a "Sterile" DWC run, although you have to be very careful when handling and dosing, if you want to know how I calculate my dose, leave a comment or send a message, I'm happy to help out. It's a great and cheap alternative to UC Roots. My equipment is mainly by Mars Hydro, I bought them with my own hard earned money, if you are interested in buying one of their lights or tents and would like a small discount and help me out, check out the link below ! https://marshydro.eu/?ref=belgianbudtender Coupon code belgianbudtender

She is expanding and drinking more and more water. The smell is getting stronger as well. At the end of next week she gets a lollipopping which is good because I cant reach the soil anymore without making some leaves wet.

Great bud with tones of bag appeal. Cant wait to see how it smells after a few weeks in the jars!

Welcome growfessors to my outdoor 2021 grow! It's been 4 years since my last outdoor grow. We've got LSD and Green Crack outside, each one in half a 55 gallon container, in pro-mix HP, with Gaia Green 4-4-4 all purpose powder nutrients. Thanks for stopping by growfessors 👽🌳💚

Bueno esta semana estaban muy bien la planta pero ya estaba muy alta y estaban por llegar a la altura máxima de la carpa , pusimos una malla así bajaban las ramas y podían recibir mejor luz toda la planta, estamos fertilizando con engorde y guano también abonamos con humus de lombriz, la planta está muy bien así q vamos a ir viendo como sigue

Day 56 of70 flowering: I was going to harvest during this week as she has hit the 8 weeks i read is her cycle. I then read another that had her as a 9-10 week flowering strain !!!. Looking at her now , she looks like another week would be possible for her as she doesn't quite look ready. Her buds are fairly loose and airy butshe doesnt have the size or bulk of her mother at all. better looking to a pint but nowhere near the size on her mains. She smells nice and fruity up close and had a few trichs starting to sprinkle around the leaf sets now finally. I dont think inwould grow this strain again as it has been major dissapointment both times i tried now. Lets see what she yields ?. UPDATE DAY 57. following good advice from Silky smooth , i have nipped the top few pistils of the main buds to encourage some girth hopefully. Thanks Silky

the weather in germany is still totally changeable. temperatures from 10 degrees at night to 30 degrees during the day. and lots of rain. she is doing really well and you can see that she is made for this weather. 💪😎. i stopped the LST and let it grow as it likes. 😋

Day 84: Watered the plants 0.5L with nuts 975 ppm, 2070 us/cm, PH 6.4 Flushed plants with 10L clear water Day 86: Watered the plants 0.5L with nuts 955 ppm, 2029 us/cm, PH 6.4 Flushed plants with 10L clear water Day 88: Watered the plants 0.5L with nuts 980 ppm, 2089 us/cm, PH 6.4 Added 1ml of bloom/top mix (5 ml/l total) Flushed plants with 10L clear water

Very compact and bushy, trimmed the crap outta her to get some air flow so she can start getting some height. I'm pretty sure I over fed in the beginning and at the end of my troubles hopefully, and she will start filling out properly.

Trichomes are cloudy, i give only rainwater now the past 5 days the runoff stays around 1000ppm so shes done eating for sure, i think this will be her final week. Buds are rockhard and smell amazing

HELLO GROWING FRIENDS - Please look at my Aftermovie Growvideo, which cost me about 4 hours to create. hope you like it! Day 72: The Finale 🌿🌟 It’s finally time. My very first grow is coming to an end—at least the cultivation phase. The plant is now ready for harvest, and I can’t believe how incredible this journey has been. I never expected to enjoy the whole process so much—from nurturing the plants to watching them grow and evolve. I’m absolutely hooked and can’t wait to dive into the next steps: harvesting, drying, curing, and of course, starting a new grow soon with fresh ideas and experiments! While it may not be the largest yield, the quality of the buds speaks for itself. The time, love, and care I’ve put into this grow is visible, and I’m pretty proud of the results. I’ll admit, I was a bit impatient at times (which I think every first-timer can relate to 😅), but the experience was priceless. Here are a few interesting highlights from my trimming and harvest process: 1️⃣ Dark Phase Before Harvest Two days before harvest, I put the plant in complete darkness to encourage resin production. I'm not sure if it really made a difference, but it was worth trying! 2️⃣ Wet Trim vs. Dry Trim I decided to go for a wet trim because the buds were really dense, and I wanted to avoid any risk of mold. I’ve read that wet trimming can speed up drying and may slightly impact the quality, but this is part of the learning experience. Next time, I’ll try a dry trim for comparison! 3️⃣ Yield Update Wet, the total came in at 209 grams from my plant. Trimming took around three hours, and it was actually a lot of fun, despite the time commitment. 4️⃣ Curing Plan The buds are now hanging in the tent for about 8 days. Once dried, they’ll go into jars with Boveda Packs (62% humidity) for another 3 weeks of curing. I'll update the smoke report once they’re fully cured, but I’ve already had a sample of the same strain from a friend, and I can say it’s pretty amazing. Final Thoughts on My Grow 🌱✨ As mentioned earlier, this grow has been an absolutely incredible experience, and it has definitely set me on a path to jump right into my next grow. There were ups and downs along the way, such as over-pruning, which I believe stressed the plants a bit. Additionally, I think they could have benefited from an extra week to mature. We also faced many temperature fluctuations this summer, which impacted the plants due to external weather conditions. I’m really pleased with the quality of the buds. The quantity is okay—I can’t fully gauge it yet—but I’m sure there’s more potential to unlock. I’ve gained valuable experience in what worked well and what didn’t. Overall, the countless lessons learned during this grow far outweigh the few mistakes made. I’m incredibly proud of my first results! As this long journey comes to an end, I want to thank everyone who followed along. I hope you enjoyed all the content. In that spirit, happy growing, and see you next time! 🌟

I found this strain very easy to grow and responded very well given the hot/humid weather we have here on the island. This strain held up very well to pest and mold/mildew

This week, such a decision could no longer be delayed. Plant #5 — The Red One — has departed the garden. She is eliminated. For many weeks, it remained the strangest of the chosen. Its curious mutations, pale foliage, and impossible floral formations made it a source of endless fascination. It never resembled its sisters truly. Following the great heat wave, something within the organism changed. Its thirst vanished. While the others continued to draw deeply from the soil each day, Plant #5 scarcely drank at all. The once-promising aroma faded into silence, leaving behind only a faint memory of the sweet diesel whispers that had once filled the chamber. Even the resin told its own story. Compared to its companions, the trichomes lagged behind, as though time itself had slowed within its flowers. The final transformation never truly began. The garden had spoken. The decision was not made in disappointment, but in understanding. As the remaining giants expanded, the chamber demanded more air, more space, and greater circulation to protect the swelling flowers from the unseen dangers that thrive in stagnant warmth. Every branch mattered. Every current of moving air became sacred. There was no longer room for hesitation. So The Red One was returned to the darkness. Now only two remain. Plant #1 — The Fat One — continues to swell with astonishing determination, its colossal colas growing denser by the day beneath a shimmering coat of resin. The fragrance has become richer still, an intoxicating union of ripe fruit, pungent gas, and strange chemical notes that linger long after the chamber is closed. Beside it stands Plant #2 — The Battered One — unwavering and formidable. Towering over the garden with its dense architecture and unmistakable diesel perfume, it has become a monument to resilience, its flowers stacking relentlessly as the harvest draws near. The chamber feels different now. Quieter. More focused. The remaining two have inherited the space once occupied by their fallen companion, allowing fresh currents of air to move freely through the canopy. Light reaches deeper. The flowers breathe more easily.

(TNC MycorMax scheint einen Stickstoffüberschuss zu erzeugen. Hatte im Sommer auch je einen halben Teelöffel unter den Samen gegeben bei drei Pflanzen und alle hatten massive Probleme mit Stickstoffüberschuss. So auch hier die Banana Purple Punch. Bei der Gelato habe ich testweise das Zeug weggelassen und sie krallt die Blätter nicht ein.) Zum Größenvergleich Bilder mit einem Feuerzeug. Beide FastBuds Pflanzen bisher sind ziemlich enttäuschend. Triebe, höchstens (!) zweimal so lang wie mein Daumennagel und schon steif mit ersten Anzeichen der Vorblüte. Vergleicht das einfach mal mit der Sunshine LSD Auto, die ich im Sommer in 20l angebaut und so ziemlich alles falsch gemacht habe. Das Teil war ein Monstrum. Selbst jemand, der seit vielen Jahren mit Photoperiodischen zu tun hat und mir von Autoflowers abriet, war sehr sehr positiv überrascht, was das Teil unter widrigsten Umständen geliefert hat. Die Buds waren so schwer, dass ich alles abstützen musste, damit nicht alles umkippt. Alleine die Hauptcola über 30cm. Wirkung hat auch gepasst. Unglaubliches Teil. Und was haben wir hier hier? Was wird das? Ein Zwergenwunderland? Ich bin ziemlich enttäuscht aber vielleicht geschieht ja noch ein Wunder. Verstehe jetzt, warum von Autoflowers Indoor wegen Stromkosten/-verschwendung abgeraten wird. Das hier wäre was für meinen Balkonkasten im Sommer aber nicht für nen 14l Topf unter 240 Watt. Hatte nach der billigen aber bombastischen Sunshine LSD Auto von 66seeds echt mehr erwartet von Breedern, die sich speziell auf Autoflowers spezialisiert haben. Wenn der Ertrag so winzig ausfällt, wie das, was ich hier in den Kübeln habe, war es das mit FastBuds. Habe noch eine Blackberry Auto und einen Mix Pack mit fünf Samen da. Aber alleine dafür sind es mir die teuren Strompreise nicht wert. Ein Miniaturwunderland kann ich auch woanders bestaunen gehen. Falls jemand einen Tipp hat, wo man ähnliche Autostrains wie die Sunshine LSD findet, bitte her damit ;) Die ist gut aber immer nur Skunk Geschmack wird auf Dauer langweilig. Noch eine Geschäftsidee für FastBuds: Verkauft doch mal Mikrowerkzeuge für's LST. Einen 2,5mm Draht kann ich da nicht dran machen.

Transplanted to a 5 gallon pot half way through the week and heavily watered/fed for the next 2 days, then topped for the first time at the end of the week. She's doing really well. Now it's about keeping the plants trained and the same height. 2 timelapses this week. Enjoy!