* Day 46 * 3 out of 5 are flowering * Moved #1 to the 3x3 with SE3000 * Grow Big and Tiger Bloom * Smelling fruity and sweet

So far, so good.

Just watered went alittle crazy on the nutes she still a rollin tho.

3rd week ... life goes on ... leaves come out ... branches grow ... what else? ☕️😂😂😂 Period : 05/04 - 11/04/25 DIARIE: A small word about my growing equipment (pic 1): - I use two 9.2L airpots (yellow base) that I modify by cutting the first three levels of the top plastic extensions inside in order to install the FloraFlex caps that fit perfectly. The bases are placed at the very bottom to stay around 9L. - Under the airpots, there are under-pots with a drainage tray of about 400 ml. It's practical but very insufficient, I would replace them with a drainage system made by myself like the FloraFlex PotPro Platform (Not found in my country 😭). - I put a scale under the under-pots. I had this idea when I started growing again. For me it's incredibly effective! I have a reference weight and I weigh it "before" and "after" watering, as well as daily, so I know when to water. I press the pots and the scales light up. Perfect watering when it's needed!!! Other information : - Watering volume per plant : 600 ml - Ro water : EC 0.0 & PH 5.8 - Light : Dimmer 60 % - PPFD : 350 - No PH check 🐍Day 1 : My 2 "girls" continue to develop well 🌿 🐍Day 2 : The plants are growing very well. 1st watering. 🐍Day 3 : I'm really happy with the progress of my two BBGs! The branches are growing but, for me, are not yet long enough to start LST. 🐍Day 4 : Dim. : 80% - PPFD: 390 - I fixed the Floraflex on the airpots (Hot glue, easy to remove) so that the caps do not lift with the attachment of the branches during the LST. 2nd watering. 🐍Day 5 : Installing a 6" Mars Hydro oscillating fan, my little Winflex fans, as old as the grow tent, are dying. 🐍Day 6 : Some photos and short vidéos. 3rd and last watering for this week. 🐍Day 7 : PPFD : 430 - Changing the sprinklers. The black clips allow you to plug two of the three holes and also make removing easier. Installation of the "Gravity Dripper" allows for much slower watering, at 2 cm in the grow medium. Start of LST... A big thank you if you come to see my diarie, smoke lots of good weed but don't forget, in reality, man doesn't fly! 😂😂😂

18.07 watering with 400ml - 400ml - 400 ml Blueberry got only water Trainwreck got Bloom, Top-max and Fish-Mix All the others got only Top-Max and Bloom. Search everyday for some spidermites or something else. On some days I find a few on blueberry and Biscotti. I remove the manually. 21.07 watering with 400 - 400 - 400 water. Again: blueberry only water All the others Top-Max and Bloom Trainerwechsel started to flower. The leaves of Blueberry and Biscotti started to get yellow. Also removed some leaves with were down in the shadow of the top strains of frosted guava.

Me está resultando muy útil tener el TrolMaster TCS-1 Tent-X ya que puedo tener una visualización rápida de la temperatura y la humedad en tiempo real, y también de las últimas 24 horas y de los últimos 7 días (week) Así puedo ir ajustando la extracción para tener una VPD ideal, y tener una pantalla que te indica si estás en rango, en función de si estás en Fase Vegetativa, Floración o Stress Es genial a su vez tener un tabla / grafico visual de VPD en función de las fases. Mira las últimas fotos para ver esta tabla tan interesante! ("Trolmaster VPD Graph" photo) ------------------------------------------------- Día 34 (19/02) Pasamos a 12/12 😁 Riego 1,25 Litro H20 + Wholly Base 2 ml/l + Solid Green 1,5 ml/l + Rise Up 1 ml/l de Gen1:11 TDS 875 PPMs - pH 6,28 Día 36 (21/02). Las plantas están explotando en crecimiento vertical! 2,5 cm al día 😍💥 Dia 38 (23/02). Riego 1,25 Litro H20 + Wholly Base 2 ml/l + Solid Green 1,5 ml/l + Rise Up 1 ml/l de Gen1:11 TDS 875 PPMs - pH 6,28 He decidido subir el riego a 1,25 litros porque se muestran sedientas! Día 39 (24/02) Muestra las preflores y no para de estirarse! 😍😍😍🐎 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae ️️🎚️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1

Mar 30 - Apr 3 Crazy weather this week. Tent temp reached 90 and above. Decided to change light schedule from off 12am on 4am to off 10am on 3pm. Seems to help. Hope all is well. Anyway, I cut my first leaf off the bottom of the plant. Getting in the way for watering and starting to block the fan. Strange growth. Some branches have Left side 1 fan leaf 1 bud site, above that Right side 1 fan leaf 1 bud site. Looking ok. Lots of bud sites. Watered twice. One neutreants, one no neut.

😈 Only On It'z 3 Day Of It'z 12 Week Binge! I Can Alwayz See Her Name Disintegrating From Their Lipz! "3rd Day" 😈-[V][V]-😈 Day 4 And Already Show'n Root! Using Clonex Water Solution In RO Water Ph'd Down To 6.5 And 2 T8 6500k Fluorescent 2' Tubez! 🌱 Day 5! She'z Reach'n For The Sky With Her Root Get'n Longer! After Her 2nd Node And Fan Leaf Im'a Put Her On The Juice! (Emerald Harvest'z) Cali Pro Gro A-B, Emerald Goddess, Root Wizzard And Study Stalk Into RO Water Ph'd To 6.8! After Her 6th Node And Fan Leaf! Move'n Her Into Her Lucious Condo! To Start Her Low Strezz Workout'z, Manicure'n And Scrog'n! Im'a Start Add'n (Emerald Harvest'z) Honey Chome And King Kola To Her Mix! Until She Hit'z Puberty! Once She Get'z A Little Fuzz On Her Peach! I'll Switch Out The Cali Pro Gro A-B With Cali Pro Gro Bloom A-B And (Emerald Harvest'z) Cal-Mag Keep'n Her Drink At A Chilly 59° And Her Air At 68° All While Get'n Her Hook'd Like A Crackhead On Co2! After That, 1-2 Weekz B4 She'z Ready To Pop! Im'a Starve Her Little Azz Cauze It'z Flush Time! (Botanicare'z) Clearex And RO Water Only! Don't Want Terrible Tasting Headaches! 🌱 After The 1'st Week I'll Only Be Updating Once A Week Unless Something Spectacular Happenz With The PC Grow. I Got To Much To Do With The New Big Auto Grow! Man I Love Fastbudz! Thiz Run Will Be FB'z GG Auto Fem And FB'z Six Shooter Auto Fem Som It Shoulb Be Exiciting! But Back To The Micro PC Grow! I Just Posted This Morning Day 5 And Damn! Big Difference From Thiz Morning! It'z The End Of Day 5 And The Rootz Are Fill'n The Grodan Like It'z Last'z Year'z Shoe! It'z Get'n Straight Shwifty! 😈🌱Day 6! Hey! Your A Crazy Bitch! But You Fuck So Good I'm On Top Of It! When I Dream I'm Doing You All Night! Scratcez All Down My Back I Keep It Right On! Crazy Bitch, Crazy Bitch, Crazy Bitch! "Crazy Bitch" Buckcherry🌱😈

We are in Flush !! Was giving them GH Flora series + rapid start + cal mag

This was a big week for the girls. We added our bud trainer clips updated the light to the EVO4 and they all seem to be doing really well. I also added some black strap molasses into the regimen to get some thick budz and nice resin. Starting to actually smell some smelly smells but the smells are tooooo smelly. All things said and done it’s going as it should. Another week down. Doobz up growmies

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Day 2. Training... Incl topping/FIM to increase nodes

Bisschen Stress hat nur noch tropical poison XL denke Block weshalb die nächsten 8tage nur Ph Wasser. Alle sind im selben Zeitraum aber ganz andere Stadien.

Week 4 The main stalk of the OG Kush so far seemed to have survived after it snapped for at least 50% and I applied duct tape around the stalk as an emergency measure. 🙏

Im 20 days into veg. Recently gave them a feeding of compost tea with a top dressing of worm casting, they have responded very well. I topped 3 of the 4 plants. Only because the 4th somehow topped herself🤷‍♂️🏽. Put up a trellis that i had to maneuver around the AC, but seemed to turn out ok. Also added a small oscillating fan to go along with the other small 6 inch fan.

Canopy is pretty even after the bending with the net, just three days made a big change. The plant finally has signs that the flower period started, you can see some white hairs on the top and some calyx forming between the nodes. The main stalk also got some nice purple veins, so I'm basically very satisfied with the results so far.

Z ist etwas hinter unseren Anderen, daher haben wir sie auch noch nicht entlaubt. Sie wächst schön und auch Buschiger. Die ersten kleinen Trichome sind zu sehen aber man sieht das sie ca eine Woche hinter den anderen ist. Nächste Woche wird Z auch entlaubt.

Flushing. Chopping any day no.