Likes
Comments
Share
UPDATES: - Temp drifting 1-2'C higher due to weather changes. - Nutes changed slightly. - VPD increase of 0.15kPa. - UVB introduced. (2 hours a day at 30cm, mid light cycle) GENETICS: -MSNL - Gorilla Glue Auto ~ my favorite strain, as you can tell by my username! WATER: -Condensed (Starting at 40ppm) -Disinfected prior to adding nutrients etc. (Using COOSPIDER UVC - 253nm & 187nm bulb) CLIMATE: - Ambient Air Temp = 28/30'C ~ 26/27'C LST ~ Leaf to air temp variance of between 1-2'C - Night Temp = 22/23'C ~ Day/Night temp differential 6-7'C - Under Canopy Temp: 26'C (Day) ~ 21'C (Night) - Relative Humidity = 50-60%RH (Avg. 55%RH) - VPD = 1.45kPa (Avg.) - Co2 ranges from 900ppm to 1500ppm (Avg. 1200ppm) AIR PRESSURE: - Ambient Air Pressure (outside tent) = Mean Avg. 1010 mbars (101 Kilopascals) - Actual Air Pressure (inside tent) = Mean Avg. 1005 mbars (100.5 Kilopascals) - Air Pressure Differential = up to 0.5 kPa range between inside & outside LIGHT: - MIGRO UVB310 ~ 2 hours daily mid light cycle. - Warm White 3000K/White 5000k/Far Red (660nm) - At plant canopy = PPFD 900-1000umols/s/m2 ~ Lux 45,000-55,000 ~ Daily Light Integral 55-65 - Under canopy lighting ~ Blue (460nm)/ Red (630nm) NUTRIENTS: - Mostly Advanced Nutrients (For base nutrients and most additives, as only company I could find scientific data on) - Canna (For Calmag Agent and Cannazym) - Plant Success (Great White Mycorrhizae) ADDITIONAL GROW TECHNIQUES: - Mostly getting out of the plants way and letting nature take its course. - Some LST. (i.e. tying down branches and tucking large leaves away) - No HST or Defoliation. INFECTION PREVENTION & CONTROL: Infection control practices i.e -PPE, Alcohol Hand wash -Gray room outside tent, -Carbon filter -HEPA filter -Plasma Ionizer -Inline UV-C germicidal bulb - Also using an additional higher powered COOSPIDER (UVC) 253nm & 187nm bulb, to disinfect the gray room outside of the tent once a week for 30 mins. - Ozone (o3) gas that is produced using the COOSPIDER, is then directed into the tent to further control any unwanted pathogens. - Ed Rosenthal (Zero Tolerance organic pesticide), sprayed once a week as preventative measure. On hand for heavier use (Once every 3 days before lights out for 15 days) in the case of an outbreak (No outbreaks yet, due to aforementioned preventative measures)
Likes
16
Share
Almost there- chop day for the rainbow forest! 🌈✂️ After 77 days, the plants have reached that perfect 10% amber / 90% milky trichome ratio I was aiming for. Even though they’re three different genetics, they all hit the sweet spot around the same time. I’ll be back soon after the great chop chop with a full dry and smoke report. Happy days, Growmies! 🌿🔥 Stats for the grand finale: 💧 Watering: 1.5L every other day 💦 Humidity: ~55% RH 🌡️ Temp (lights on): 22–26°C 🌡️ Temp (lights off): 20–22°C 📈 Avg. VPD (lights on): ~1.45 kPa
Likes
10
Share
@SweetGrow
Follow
Two of them id ok but i dont know what heppend to this one. I think it will be good , just need some time👍🏻 Am right?
Likes
97
Share
hello hello growers! My dark phoenix makes me very happy with its growth and development .. this very peculiar bole is seen by its appearance and characteristic leaves .. I think I understood why she was called a phoenix)) each tip of a branch where leaves have just recently blossomed, looks like a bird, like a phoenix) take a closer look at some of the photos, this is clearly a view)) chack the video)))
Likes
35
Share
@DaBeers
Follow
Day 50 - 2/1/22 - All have now received 2 rounds of Tiger Bloom +Sweet and Sticky and 2 rounds of Cal-Mag and Sweet + Sticky - and they freaking LOVE IT! Maybe it's genetics but the buds on the 2 more mature ones are fattening up nicely. A noticeable change from yesterday. I am on the right track... I gotta start thinking about the Harvest, Drying, and Curing stages! Day 70 is the general harvest day... Day 53 - 16 days till harvest (maybe) says the genetic description. So I did my first flush with filtered and Ph'd water. Almost a gallon per plant. Wondering if there will be a final push to fatten up the buds. Either way this has already been a successful grow! Note to self - be aware of the changing light to plant distance. I had the bigger one a little too close and she told me via yellowing leaves. Caught it in time but still a rookie mistake! Day 56 - gave them some FF Big Bloom. Not sure exactly why... I'm pretty sure I was thinking, finally, about micro-nutrients. Overall I started applying nutes a little too late - another rookie mistake. But this is how we learn. We go thru the process! Gonna add a couple new pics from this Windows Surface Pro 7 camera. Never used it before now. Let's see if it's better in the bright lights...
Likes
17
Share
@Hashy
Follow
Week 11 Light cycle=12/12 Light Power=140w Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 45% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use Fri 1/3/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=0.5ml/L Terra Bloom=3.0ml/L Sumo Boost=2.0ml/L P/K 9/18=0.5ml/L Easy Ph down=0.115ml/L Ec=1.65 PH=6.5/6.8 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(L) Total volume left=3L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=2.25L Ec=2.22 PH=6.2/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 71)(Day 33 flower) 📋 Developing well I'd say this is going to be the 2nd plant to finish. Sat 2/3/24 #1 (Day 72)(Day 34 flower) 📋 Sun 3/3/24 #1 (Day 73)(Day 35 flower) 📋 140w to 130w Mon 4/3/24 #1 (Day 74)(Day 36 flower) 📋 Tue 5/3/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Easy Ph down=0.008ml/L Ec=0.2 PH=6.4/6.4 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.5L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1L Ec=1.6 PH=6.3/ Didn't run as should because forgot to plug it in. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 75)(Day 37 flower) 📋 Defoliate some lower stuff. Wed 6/3/24 #1 (Day 76)(Day 38 flower) 📋 Thur 7/3/24 #1 (Day 77)(Day 39 flower) 📋 H=100cm D=15cm DLI=60.0 She is doing great and will possibly be done in about 2 weeks by the looks of things. She will be going onto a ripening feed from now on. Back soon. Take it easy.
Likes
120
Share
Greetings, fellow ninja enthusiasts! Get ready for another exciting update on our Lego Ninja Tropical Tangie Run. Week 6 has been a whirlwind of growth and training, and our Tangie is shaping up to be a true ninja superstar! First, let's talk about the transplant. Our Tangie has outgrown her previous home, so I fearlessly transferred her to a spacious 25-liter fabric pot. With the help of Aptus Holland Mycor Mix, I ensured a smooth transition, providing her with beneficial mycorrhizal fungi to establish a strong root system. It's like giving her a ninja squad of underground helpers! To support her growth and development, I mixed 75 grams of Aptus All-in-One Pellets into the soil. These pellets are like ninja power capsules, packed with essential nutrients that will fuel her journey to greatness. With each watering, she'll receive the perfect dose of nourishment, ensuring optimal health and vitality. But that's not all! My trusty Lego Ninja buddies have been by my side throughout the process. They provide moral support and keep the ninja vibes strong in the grow room. Who knew little plastic warriors could be such great companions on this green adventure? After the transplant, it was time to introduce our Tangie to the art of scrogging. I installed a scrog net, creating a framework for her to weave her way through. It's like a ninja obstacle course, challenging her to grow horizontally and maximize her bud production. She's already showing off her impressive moves, filling up the space with her graceful and sexy growth. Of course, proper nutrition is vital for our Tangie's ninja training. I've been using Aptus Holland Veg Watering Mix, enriched with the goodness of All-in-One Liquid. This dynamic duo ensures she receives the perfect blend of macro and micronutrients, giving her the strength and energy to become a legendary ninja warrior. As she continues her ninja journey, our Tangie is bathed in a PPFD of 500. These photons are like her ninja training partners, encouraging robust photosynthesis and explosive growth. With each photon absorbed, she becomes more formidable, ready to take on the challenges that lie ahead. In summary, Week 6 has been a thrilling chapter in our Lego Ninja Tropical Tangie Run. With a successful transplant, the magic of Aptus products, the support of our Lego Ninja buddies, and the installation of the scrog net, our Tangie is on her way to becoming a true ninja warrior. Stay tuned for the next update, where we'll dive deeper into the ninja training techniques and witness the unfolding of our Tangie's ninja powers. Until then, keep cultivating with joy, embrace the ninja spirit, and remember that every plant has the potential to become a botanical ninja superstar! As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dutchpassion #dogdoctorofficial #legoninjago #growerslove 
 With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3
Likes
17
Share
This week ia am planning to let it grow just like this. Hopefully I will receive a plant camera next week to monitor my VPD. Also added an IRheater to keep temperature stable The infrared heater does its job, but I find it a waste of electricity, 3.6 kWh in one night. So I've decided to install a gas heater instead, which delivers the same result at a much lower cost and also provides additional CO2. The heater can then keep the temperature above 21˚C with the lights off. The natural gas heater will be used with the lights on. I need to quickly find a CO2 sensor because too much CO2 has a counterproductive effect, as I've already noticed. Approximately 1200 PPM at 32˚C is optimal as long as I can maintain a DLI of 35. Great technology is on the way. Added: Installed CO2 burner, run it for 6 minutes every hour. Temp raises from 22˚C to 27˚C in about 7 minutes. CO2 detector (just colors, no values) doesn't alarm so not above 1500PPM CO monitor also no alarm :) Running for 4 hours now and a visible change is there. Tomorrow I will know if it is ok or not. Added a few pictures. Lets see if we can see the difference tomorrow. 26-05: Added Dimlux Maxi controller for CO2 and VPD. Works nice. 28-05: Topped a few 31-05 Added additional 300W to heat the stuff up. RH is stable but high on 72%. Could add a dehumidifier but since CO2 is already there and my VPD is around 0.8 I thought adding light would be cheaper. Can go up to 33˚C before my floor is heating up too much. Also cleaned the watertank. So from now on they are on Ata Max
Likes
24
Share
Woche 5 hat gestartet und ihn geht es prächtig sie verändern sich täglich, eine zeigt Mängel auf aber nur minimal. bin gespannt noch circa zwei Wochen Wachstum dann in die Blüte. Die Girls wurden langsam LTS gebunden und topping wurde gemacht bei jeder Purple Punche wurde durch random seid ersetzt sieht bis jetzt gut aus
Likes
6
Share
Toujours un bonheur de cultivé les semence fastbuds. La gorilla skittles est ma strain préférer et elle ne semble pas vouloir me décevoir encore cette fois
Likes
5
Share
Nothing really Changed. Did a topping today. She's A little taller. Love to See her growing ❤️
Likes
19
Share
Why hello, if you are still here thank you for the love & support. I cant believe we are already on the start to week 3 of bloom! This lady here has been streching the last 2 weeks! During the first week of bloom I gave her nutrients with both bloom a & b as well with bud candy! Then water in betwen watering. Shes been needing watered everyday in this 10 Gallon pot! So im very careful with the nutrients and keeping a close eye on her! Ive also used dried coconut powder with irrarated, ph balanced water. To help the roots absorb the nutrients and really up take! Im beyond ready to see what week 3 brings us! Ive been behind on defoilation only taking about 3 to 5 leafs a day just to try to get other coals light! If you have any question feel free to ask! Much lovee lets go guava!!!
Processing
Likes
26
Share
82.5 grams she taste so good ... thanks for all the love everyone
Processing
Likes
16
Share
@S1993
Follow
Second week of flower and my ladys have all grown rapidly in the last week bud seem to be blooming already at a decent size also main stem has gone quite thick.
Likes
4
Share
@Andres
Follow
I was traveling ... to give information ... the temperature has dropped ... I think she will be even slower outdoor ....