Settimana prossima aggiorno con le ultime foto e con il peso secco ma già posso dire di aver superato i 500gr con 6 piante sotto 600w 😉

Unfortunately, the plants have numerous leaves which look unhealthy (discolored, droopy, crispy/decayed). I removed the 3-4 worst looking leaves from each plant every other day, although I know that can be harmful to autos. Started adding in "Sensi Cal" this week to hopefully rebound from potential mineral deficiencies. Still using Recharge microbes once a week. Nutrients are now being administered accurately and at 1/4 the recommended level. Despite the unhealthy state of the plants, the pre-flowering bud sites look pretty good to me. I'm happy to see healthy looking pistils. Needless to say, I'm very eager to get these girls back on track and looking vibrant and verdant ASAP.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Additional supplements: (ml/g) .4 drip clean, .25 roots excelurator, .5 amino treatment, 3.0 multi zen, 2.0 hydroguard. The tent smells good 😊. 8/2 The goal is to have 6-9" through the scrog at the end of week 3 flower I'm pretty close the taller ones are 6-7" through the scrog now. 8/3 took 7cuttings from Acid Dough "C" for clones. 8/5 could be more level but I'm happy. 8/6 another round of defoliating lots of branches just below the canopy opened them up.

Week 8 for the Cherry coco🍒 One Green Pheno in the garden. Green sensation next week I can already see the harvest👀 Have a good one Take care😎

Didn't expect this plant to weigh so much! Total plant itself 4.768 lbs

Tag 78 bin grad am spülen und Ernte ist Tag 80

Dane, We all should help one another. Human beings are like that. We should live by each other’s happiness - not by each other’s misery. We don’t want to hate and despise one another, share the Joint. And mother earth is rich and can provide for everyone. We can Grow enough Happiness, In this paradise, there is room for everyone. We only exist to bring joy into the world and The way of life can be free and beautiful, but we have lost the way. Grow High and Give the world A smile. At the end we own nothing more then all our memories, lets make them amazing for everyone, nothing to loose only everything to win. A last kiss goodby, a second one, softer and long as a sign, that you are woth it. That Everyone worth who loved and give. Enought Hippie Talk, now have a nice day and an even better grow, thx for watching by. (36 next week flower nutrients for water

Hello everybody! This week will be the hardest one. I’ll have to work a lot inside the room, and even on GD to document all the changes. Last week I topped for the last time (in reality this happened the first day of this week), and finally stopped with high stress training. From now on, our attention will fall totally on ScrOG. Day 43: Topped the 4 colas at the extremities. Red blood came out from them (see the photos). Amazing! Sorry for the bad quality, but I got just the phone with me when I did the job. When I took the second photo (a few hours later), the plant had already sucked up all the lymph. You can still see the red blood by the way. Day 44: Set the timer to start with 12/12 from midnight of day 45. Day 45: SO MANY THINGS HAPPENED TODAY. Flowering started, baby! 🤩 Today, in the evening, I worked for about 4 hours to prepare the ScrOG environment. - Improved the LST before placing the grid. - Took some photos. - Removed the humidifier. - Since my LED panel has half of the blue lights broken (this happened three weeks ago), resulting in 100W less of total potency, I added 3 new lights pointing where the panel is broken (2x 36W led bulbs and 1x 30W COB led light). I uploaded a photo and a video to better understand what I’m talking about. I even tried changing the broken LED driver, but it didn’t work, so now I’ll have to wait until the end of this cycle to send it to maintenance. - Put 20gr of BatMagno (which is bat guano), 10gr of “Farina di Neem” (Neem Flour), and 50gr of Alghe, all of them over the soil. I’ll write something about these fertilizers at the end of the comment. - 4.5L of tap water (corrected to PH6.5), which gave zero runoff. Haha, she’s drinking like a camel. - Placed the grid. - Took a few photos. - Little defoliation. - Took all the other photos. - There we go! I preferred not to add the bloom fertilizer now because I’m a little worried about overfertilizing this baby. During veg, she showed me she doesn’t like nutrients, so I’m just listening to her requests. I’ll add the bloom one as soon as she seems hungry again. By the way she’s just 20cm tall (I’m so proud of this result) and the grid is located a few centimeters above her. Let’s see if I switched to 12/12 at the right time: I heard this strain usually stretches for about 6 weeks!!! 😱😱 Let’s talk about the ferts I placed on the surface of the soil. - BatGuano: it’s a mixture of organic fertilizers of natural origin and suitable to produce a high amount of organic nitrogen and phosphorus that can be assimilated at 100%. It’s a natural slow-release fertilizer for flowering: the raw materials used (guano, dried borlanda with ammonium salts, kieserite of natural origin, flagpole, meat meal, bone meal and dried poultry) are the result of a careful selection which ensures a low salinity and a gradual transfer of the elements. The phosphorus content in BatMagno (being organic) does not undergo insolubilization. - Alghe: they are a portentose substrate activator made of a mixture of algae of the species Ascophillum, Fucales and Laminariales, obtained through a process of dehydration and grinding without the use of any chemical substance. They can be used during the preparation of the soil, and increase and strengthen the formation of the root system, mobilize the nutrients in the soil, reinvigorate the plants, protecting them from adverse weather conditions, help plants to overcome stress conditions and improve the quantity and quality of production. All of this is possible thanks to the presence of betaine, cytokinins, vitamins, auxins and alginates polysaccharides. - Farina di Neem (Neem Flour): it’s a vegetable product based on Neem seeds, obtained from the extraction of Neem Oil through a process of cold-squizzing out, which increases crops, improving both growth and flowering, as well as strengthening the roots of the plants. The Neem Flour is mixed with nitrogen fertilizers, that slow down the conversion and leaching of nitrogen. Repeated interventions improve the endogenous resistance of plants to pathogens, creating an unsuitable environment for the development of insects and cryptogams. Due to the presence of important trace elements for plant life, it prevents imbalances and nutritional disorders. It also protects plants from Nematodes, ants, insects and soil larvae. Let’s say Alghe is the most smelly product. My room now smells like seaweed! I need to figure out how to give her water now that the grid is on. I think I’ll plug a 2m pipe at the end of my watering can. That’s the most easy and cheap way to fix this problem. I just need to find the right size of the pipe. I’ll show you my solution next week.

🐞 Week 4 Update: LST, A Little Helper, and a Funky Mutation! 🌿 Week Update: Shaping her up! 🐞 Welcome to Week 4! The plant is growing nicely and we are officially starting to shape her up. I had a little ladybug patrolling the coco and hanging out on the leaves always nice to have some natural pest control on duty! But the most interesting thing this week is a strange little leaf mutation on one of the new growths. The Details: Development: She is vegging well and taking to the substrate nicely. The roots must be getting well established because the top growth is really starting to push out. There is a really funky leaf mutation happening on one side (check the close-up pics!) where the leaf looks twisted and almost double-layered. It doesn't seem to be slowing her down though, just a cool genetic quirk! Structure: I started some LST (Low Stress Training) this week! Using some wire ties to gently bend the main stem down and expose those lower nodes to the light. The goal is to keep the canopy nice and even before she gets too tall. She took the bending like a champ and is already turning her top back up towards the light. Health: Overall health is great! The leaves are holding a beautiful deep green, no signs of nutrient burn or deficiencies so far. The ladybug friend 🐞 is a very welcome sight to keep any unwanted pests away from the tent. I'm keeping a close eye on the mutated leaf to see what it does, but otherwise, she's perfectly healthy and happy. Next Steps: I'll continue to adjust the LST ties as she stretches and keep monitoring the moisture levels. I'll probably up the feed slightly next week if she keeps responding this well. Let's see how this mutation develops! Happy Growing !!! 🥦☀️

She is growing super fast with the 315 watts LEC, only see the diference between day 27 and day 28. Replace Bio root with Flora Blend, very happy so far so good.

Good progress and defiency maintained

nice and clean down below so the energy can focus on the top maintaining the same temperatures will start lowering next week to start bringing out the purple

ROSEGROWS RecProRun1

Everything looks great...going to transplant next week!!!

El día 31 de floracion cambio las 3 plantas traseras de posición para el moldeo lumínico. El día 35 ya han dejado de crecer por lo tanto les hago la última defoliacion. Han crecido y ramificado bien, veamos cómo engordan. Empiezan a producir bastante resina/tricomas. Han terminado todas entre 90-105cm, menos una que se ha quedado en 80cm, aunque no es problema.

Buds are seelling

Wonderful! One or two weeks to go!