Likes
Comments
Share
We planted this seed directly in the medium and in 2 days it has sprouted up fully. We are growing this in a 1 gallon pot alongside our other jack herer auto which is being grown in a 3 gallon pot.
Likes
7
Share
@Athos_GD
Follow
The buds are really sticky and smell super strong. This stuff gives you a head high followed by relaxation. I dried for 14 days at 60 degrees Fahrenheit and 60 % RH.
Likes
2
Share
@PINUFLA
Follow
Día: 58 Riego: 800ml x Pl. - SoloTek Bloom 2mlxL - HeavyBud 2mlxL - Vitamax 1mlxL - MonsterBloom 0,3gxL Día: 62 Riego: 1L x Pl. - ProSilicate 1mlxL
Likes
21
Share
Flowering day 22 since time change to 12/12 h. Hey guys :-) Another great week that is over. They all develop exactly as it should be 💚. Since the last leaf and substrate application against tripse, I finally haven't seen any of the little biters 👍. Watering was done twice this week with 1.3 l each time (see table above for nutrients). The lowest shoots were removed so that the energy is not wasted in the lower part :-) . Otherwise, as always, everything was cleaned and checked. Fresh osmosis water was filled with stale tap water in a 100 L tank for the coming week 👍. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
Comments
Share
Likes
19
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D70/B08 - 24/01/24 ⚗️ 🌡️ 🌊 🍗 💼 🧠 pH is finally stable on the lower side (hopefully) 🚀 The Tent-X is on its way, I can't wait to get it.. 🎬 Added Timelapse video ________________________________ 📅 D71/B09 - 25/01/24 ⚗️ EC: 1.2 pH: 5.6 🌡️ T: 23 °C H: 45% 🌊 🍗 💧 💼 I put T-H Sensor of TrolMaster on the SCroG net 🧠 🚀Tent-X from TrolMaster received, I'm going to set it up tomorrow 🎬 Added Timelapse video ________________________________ 📅 D72/B10 - 26/01/24 ⚗️ EC: 1.2 pH: 6 🌡️ T: 23 °C H: 40% 🌊 Added 6L 🍗 Added Bloom A-B - CalMag - Big Bud - Bud Candy - B52 💼 Tent-X set up done ! 🧠 It works perfectly and as I just see so far, from now on, I'm going to experiment a new way to grow ! 🚀 🎬 Added Timelapse video and Set-Up videos and pics ________________________________ 📅 D73/B11 - 27/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 40% 🌊 🍗 💧 Added a little of pH- 💼 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D74/B12 - 28/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 35% 🌊 Added 4L 🍗 Added CalMag - Bloom A-B - B52 - Bud Candy - Big Bud 💧 Added some pH- 💼 🧠 🚀 🎬 Added Timelapse video and 4 pics ________________________________ 📅 D75/B13 - 29/01/24 ⚗️ EC: 1 pH: 6.0 🌡️ T: 23 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse video and "TM+ Pro" App screenshots. This is the app used to monotoring the Tent-X controller ________________________________ 📅 D76/B14 - 30/01/24 ⚗️ EC: 1.2 pH 6.1 🌡️ T: 18-26 °C H: 30-55% (from now on, I'll put the Min-Max values of T-H as I can easily read them from the app.) 🌊 4L 🍗 CalMag - Bloom A-B - Bud Candy - Big Bud - B52 💧 💼 I added a Humidifier as the H falls down to 30% 🧠 With the help of Humidifier, according with "TM+ Pro" app, I got the perfect VPD (Vapor Pressure Deficit) rate !! (see screenshots) 🚀 I have to face a very low rate humidity of the external enviroment 🎬 Added Timelapse video and T-H values daily graph, and perfect VPD from the Tent-X controller ________________________________
Likes
23
Share
@Athos_GD
Follow
Strain was easy to grow. Had some herms but since I only have 2 plants I was able to pinch the balls off. Buds have no seeds and are a strong smoke. Really hits the lungs.
Likes
5
Share
This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned
Likes
39
Share
Likes
2
Share
So far so good transplant to a 15 gal...good thing I didn't wait till nxt week...top soil sink to the bottom and was hand for the roots to get tru
Likes
30
Share
2026-04-04 So these are the last Pictures of the Permanent Bluez- 3 of 4 Girls are already harvested, another one follows on Monday- she will go into Extracts for a CUP i absolutely had no expectations on thsi Strain- and it just delivered fantastic growing super structured Plants, frosty and fat Buds- delicious smell more in the harvestweek
Likes
3
Share
They’re chopped we will be checking in again in 7-10 days and start the the whole weighing process. They have beautiful color they got dark now I see the why the name lol. I’m glad I was able to keep her and give her a proper grow. Make sure to check out the other diary we are at week 3 of Veg and we flip to flower next week.
Likes
67
Share
Organization was the word for the week. I organized the leaves on Daphni by cutting some old fan leaves and low level leaves. I organized my CO2 injection procedure. CO2 tank to REGULATOR thru SOLENOID connected to TIMER every two hours with lights on. I also organized the power strip in the back with cable ties and sleeves. Finally I had to organize my way out of a FUBAR situation when the oxigenating device in the RainForest 66 Reservoir stopped working. I will have some words to say to Katie in customer service for sure. I got a standard oxiginator and a disk shaped air stone and use that now to keep the water healthy. Daphni is staring to bud more on the lower nodes and the progress so far looks good. Knock on wood. Since i turn the exhaust fan off when CO2 is injected i dont really need the heater so I took it out. Have a great week.
Likes
3
Share
Noch ein videozusatz:3 Die Pflanze war wirklich eindrucksvoll Sie hätte safe noch länger stehen können, aber das hat schon so voooll lange gedauert durch das revegetieren in der Blüte deswegen habe ich Sie früher geerntet und wegen Schimmel an der RiesenKnospe (hatte keinen luftentfeuchter)
Likes
13
Share
@J_diaz420
Follow
Solamente defoliación mientras las veo crecer en su prefloracion.
Likes
126
Share
D61 - The beginning of the fifth week of flower. Most trichomes are cloudy, but there are still some clear, and I'm seeing a few amber. I guess it will take another week, maybe two, until she is done. D66 - Seeing less clear trichomes. She should be ready to harvest within the next week, I think. D67 - The end of another week, and we're getting close to chop day.
Likes
1
Share
Decide to defoliate as well as notice she is going into flowering so more pictures will be added . She is looking very healthy and very full
Likes
15
Share
Likes
198
Share
@DevilsBud
Follow
New week for the 2nd grow In the new marshydro set-up Enjoy the video be warned it can get LOUD 😉 there all looking amazing in there own way for separate details per plant go to there diaries 🤘🏻 I believe the new FC-4800 wel i KNOW This lamp is out of this world for sure it will get your so frosty so quick i was afraid i did something wrong lol nah she is just a absolute BEAST . AND THE 120X120X200 TENT Is great for the grow that have going on now there snug like bug in there no netting needed 🤘🏻 the control of heat and humidity is easy as can be winter is my time to grow no problem what so ever visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter