Processing
Likes
Comments
Share
Likes
18
Share
~ FASTBUDS TESTER #2206 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged roughly 24 hours later. 12/3- Today their tap roots were about 1/2 to 3/4" so at 11 am I transferred them into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened and the #2 isn't far behind! 12/5- Well this is Day ONE for the #2 FBT #2206 and the second day for her sister! I'll keep them in the covered/heated Jiffy tray until I see their roots beginning to emerge from the peat pellet, then I'll transfer them gently into their respective fabric pots. The #1 will be going into the 4g Gronest pot from FastBuds and the #2 will reside in a 3g pot by Wraxly, which I'm trying out for the first time. 12/7- Yesterday I checked the #1 tester and she had roots starting to emerge from her pellet so I transferred her into her 4g Gronest pot. After making a hole in the medium for the peat pellet, I coated the entire surface with Xtreme Gardening Mycos then placed the pellet in the hole and planted her in. Lastly, I watered her in with about 4oz of de-chlorinated water with 3ml/g of FishShit added which was then ph'd to 6.4 @ 75℉ after which I placed a humidome over her for 24hrs to ensure that the humidity stays constant. The #2 tester is doing great and I'm confident that she should be ready to transfer into her fabric pot in the next couple of days! 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
15
Share
@Dabking
Follow
Had an issue, hence the yellow leaves. I believe I fixed it, so time will tell
Likes
9
Share
Good morning friends of growdiaries, As you can see in the photos it is a real jungle. In bloom. 3 of the 5 plants exceeded 150 cm, I had to bend them strongly so that they remained under the lamp. For the rest you have seen, the plants are strong, robust and healthy. The central stem is really large, and having stretched from the beginning in each internode to product various branches, which are already filled with inflorescences. Let's see what comes out. Given the damned and damned fact that I will not even be able to taste the harvest, the flowering will be 100% complete
Likes
5
Share
@daleJR
Follow
clones from the seed grown plants. This is a F1 Fast strain. Photoperiod. I topped these plants that were autos. I see that topping these girls triggered something left over from the auto genetics...I have had autos on more than 1 occasion immediately start flowering. I am sure this would have had it not been a photoperiod. I have 10 clones of this and I will not be topping it until absolutely necessary. Had i not been down to 1 tent and a grow light I would have moved on with flowering those cute little things...
Likes
2
Share
So week 2 lets see what this will produce ,transplanted few days ago and looking good so far ,they enjoying some root juice and Dynamyco
Likes
16
Share
@Mopish
Follow
10 Jan - 16 Jan 11 Jan Kush del Arriero: Looking good, fat buds, a lot of them. Choco Cookies: This one has been a little too sensitive with nutrients, it only has a few small buds, the other plants overshadow it. Banana Cake: TBH I thought this was going to be the one with the biggest buds, they look frosty tho. 15 Jan Some fan leaves are starting to look pretty damaged by a previous nutrient lock.
Likes
38
Share
@squalino
Follow
final frostbanger fast buds ❤️ 12 semaines récoltée poids humide 515 grammes netoyer grosses têtes pour la plupart et lourde dense photo dans la barquette. le sceau petite tête les feuille étaient tellement encré dans les têtes et collé aux tête que c'était pénible pour la netoyer. plusieur tête coupé. 6 heures de nettoyage. mais résultat très beaux brillant collant pleine de résine j'ai du changer au moins 10 fois les gants tellement que cela collait. conclusion très belle plante. très belles têtes dodues qui sent teop bon et le fumer un gout frais et évidemment l'essentiel : elle DEFONSE.j'adore. . j'adopte avec la gorilla cookies . et maintenant la frostbanger. je la referais. elle vaut le coup MERCI FAST BUDS ❤️ MERCI BIOTABS ❤️ je viendrai dire combien sec je vais avoir mais vue la grosseur des tête elles vont prendre un peux de temps . comme la gorilla cookies les têtes sont tellement grosses qu'elle prennent du temps désolé pour le peux de foro mais j'en ai eu marre hier soir à 23 heures .j'ai fait au plus vite samedi la gorilla cookies 8 heures de coupage dimanche la frostbanger 6 heures c'était long
Processing
Likes
4
Share
Likes
14
Share
Everything got a lot more darker and golden with temp drop technique i show earlier and water temp 60f and flushing too soon to harvest I’ll show next time how the buds look
Likes
2
Share
Flower moving along. Added big bud from advanced nutrients to res on day 32. EC is 2.9 DLI is 60.
Likes
24
Share
@3lementa1
Follow
This is the 8th week. Thursday will be 9 weeks of 12/12. Some trichs are amber. They just added a good bunch of girth over the past few days, but most of the pistils are red now. The rest of them have been dropping leaves consistenly but the canopy remains full so they must be putting out more leaves. I just flushed to 80% runoff and found out that I had 1200ppm. I just got an ec meter but my last reading said closer to 600 so idk what happened there. I flushed until I had runoff ppm of about 150. Now they're back in the grow tent. I don't want to keep assaulting them with my microscope. I think they're ready. Just gonna let them settle another day or two to dry out a bit. I took one small branch off the small Wedding Cake plant on Thursday and I've just been watching it dry on my counter. It's been 5 days and the stem snaps but still leaves a fiber connecting. I put it into a small jar with a 64RH thing. I just want to try it. It already smells amazing. The leaves on the big CBD Blue Shark plant are going really yellow and some other colours are starting to come out as well. The buds all fattened up and got more frosty again. I was worried they were foxtailing but they got more calyxes underneath the peaks and have been making more of a pyramid shape. They're really close to peak. Harvest day will be March 17 or 18. March 17 1023pm chopped and hung after lights off all day. RH was 65% before I chopped and 50% after I closed the window and cut the plants off the saturated pots. I did a wet trim to prevent mold. The buds are sticky af. Gonna hang them to dry for 7-9 days before curing in jars :) March 18 : checked the RH when I woke up and it's chilling at 45% 😎 March 19 : just checked to see how they were drying. There are seeds in every plant. RIP I'll update when I put them in jars and again a few weeks later for final review. Overall it was a good grow despite the rocky start and a good introduction to the mainline technique and my new grow space. Next grow I should have everything pretty well dialed in. March 23 They were hanging for 3 days. Rh was around 45, then spiked to 65 overnight when I forgot to turn the fans back on. Temp was high at around 26.they felt wet after 2 days, and bone dry after 4 days. The stems still didn't snap but I put them in jars anyway. A day later, jar RH was 50%. I burped all the jars and there was a smell from the new jars. I took all the weed out, washed out the jars, and did a dry trim on the weed. One of the Wedding Cake plants must have gone hermie. I didn't see any bananas and didn't even realize there were seeds until the very end. The seed pods looked just like calyxes while the plants were growing. Many of the nugs are unusable. Under the sugar leaves are just layers and layers of seeds. Some weren't hit that badly. The CBD Blue Shark is much better off but still has some seeds. I'm trying to stay positive. It's a bit of a shock though. I'm anxious to try the finished product. If the flowers at least taste good and have a good effect, all is not lost.
Processing
Likes
12
Share
@jackherer
Follow
Lst bağları çözdüm scrog ağı montajı tamam bu yaratıkların gelişimi nasıl olacak?
Likes
20
Share
Crecen muy bien, una genética muy firme. Las plantas se desarrollan piramidalmente. Tienen mucha fuerza, parece que van a producir bastante.mantengo ec en 1.2.
Likes
36
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 72 since time change to 12/12 h. Hey everyone :-) Today it was harvested. Despite that there was a bit of mold on the top 2 buds, it turned out to be a very nice amount :-). After the lady was in the dark for 48 hours she was trimmed by hand :-). Then the buds were put into the drying tent at 62% humidity, where they now remain for 8-12 days before they are put into the jar to ferment with 62% boveda packs. Of course, the last update will come after the fermentation and I wish you all the best until then. Stay healthy 🙏🏻 You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .