Likes
Comments
Share
@PizzaBoy
Follow
Lollipoping/defoliation completed at the very beginning of the week. Some will argue that’s too late. But I find I get better yields if I wait till the last minute. They will be left alone for the rest of the grow. Started mid week bumping up to 1250ppm as the stretch has stopped. That caused a little nuit burn, so dialled back to 1150ppm.
Likes
14
Share
@Cannabot
Follow
Growing decently,getting a good root zone for transplant in the next few weeks
Likes
8
Share
Week 14 - August 13 Back from holidays. One week without carrying plants. All is Ok ✅ the Blumat irrigation system worked perfectly, Aphids are totally eradicated: the Garlic mixture is a miracle. 🐛I found 5 caterpillars on 2 plants: it makes lot of damage on a Bubble Gum I didn’t mention in the diary, but the other are safely. caterpillars are the Enemy N°1 at this point: must check everyday. I found 5 caterpillars on 2 plants: it makes lot of damage on a Bubble Gum I didn’t mention in the diary, but the other are safely. caterpillars are the Enemy N°1 at this point: must check everyday. Presence of leafminer flies but nothing important. -Royal Moby, seriously injured by sunburn and aphids aggression: recovering good, amazing stretch (sativa dominant) 140cm high , new branches are healthy. Flowering stage not engaged. -GMOxZombie Kush, was pretty shocked by aphids and sunburn too but problems are resolved: the plant is not too bad, starting a pre flowering period. 115cm -Flash Back #2 start flowering. Perfectly healthy, no pests, diseases or deficiency. Gook stretch last weeks, lot of ramifications and booming sites.130cm -Brake Pad Breath is the most advanced with a flowering stage engaged since 2 weeks. Super heathy, efficient bushy structure with lot of branches: my Favorite! 🌞Daylight 14h15 - 7h05 / 21h11 Around 26 to 32°C this week, hot night, sunny day, little bit of humidity. 💦Watering 1,5L / 3 days 💪Nutrients: Master Grower Floraison by Hydropassion
Likes
111
Share
@DevilsBud
Follow
Day 56 of flowering of the 2 Hyper Glue from Anesia Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing she flushing very good and is almost done but here leaves are still Green en very healthy looking 🤔 here leaves should be turning other colors because of getting the feed out of the soil ore i am i wrong and can the nutrients be flush out but leaves still very healthy looking ? Trichomes are looking good how i want them so i am bit confused with this one but if the ppm is down enough i might just cut here down because she is looking fucking great 👌🏻 23/12/21 Runoff is around 1100 ppm almost done 👌🏻 25/12/21 Runoff is around 800 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 600 ppm 🤘🏻 beyond frosty buds are HUGE!!! smell is Tru the roof Super Glue x Apple Fritter is something els thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end can recommend any grower Hyper Glue from @anesiaseeds 28/12/21 Chop chop 1 hyper glue One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
Comments
Share
The buds are getting bigger, two plants have started fading to yellow, while the one in the middle is severely overfed, which I did not realize at the time. Still quite happy with how they looked and that the canopy was quite even without much additional training besides the initial topping. I did bend the center plant's (the only one which wasn't topped) main branch to the side however.
Likes
9
Share
Molto aromatica con sentori di frutta pungente e spezie confuse con il caffè molto gradevole
Likes
9
Share
Every has gone absolutely smooth so far with growing this girl. Full 8 weeks old today & 21 days into flower. She has a fairly strong sweet smell & her buds continue to bulk up. As I just harvested 1 plant , it's created a bit of space for me to put her into the Flowering tent for 12 hrs each day & move her back to veg for the remaining 8 hrs, as I'm running 780watts in the flower tent, hopefully this will bulk them up more. Simple L.S.T. grow grew her out a few nodes & bent her over & tied her down, doing a similar thing with the side branches. Then I've just let her go & do her own thing & haven't done anything other than feed her, haven't really had to do any defoliation as there's not that many leaves on her naturally. Interested in growing Fast Buds? Use the code GROWEED when purchasing seeds to receive a 15% discount off the price.
Likes
18
Share
@cannasaxx
Follow
Sie haben das Umtopfen ganz gut überstanden. Eine von den dreien macht ganz gut los. Die anderen beiden haben wohl noch etwas Stress durch das Umtopfen. Alle 3 sind Samen der selben Genetik aber selbstverständlich auch verschiedene Phenotypen, sie werden auf jeden Fall unterschiedlich wachsen und aussehen. Ich finde aber No-till besser als Stecklinge und je besser der Züchter um so weniger Phenos 😉 Wir werden sehen... 😎
Likes
44
Share
@Roberts
Follow
I am dropping Fast Buds tester FBT 2402 today to germinate. The seed was lightly scuffed on each end. I will be using Xpert Nutrients for the first time on this grow. I will also be using a Medic Grow Mini Sun-2. Thank you Fast Buds, Xpert Nutrients, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
82
Share
Hello growmies! Welcome to week three of An Epsilon Adventure! Week three already! These six ladies were each planted into their final 30l pots, fertigated for the first time, and put under the light two weeks ago. As you know if you have been following, last week I switch to full nutes earlier than planned as I was seeing deficiencies. Those deficiencies progressed quicker than the plants could respond to the new nutrition. To combat this I fertigated them more frequently and with more volume, as you have the option to do in a coco/perlite substrate mix. I have just given them their third full range fertigation after taking todays photos. All in all so far I am blown away by their progress, they are by far and away the most advanced 15 day old plants I've ever grown. I just wish I had started fertigating with everything earlier. I will certainly report back to Shogun that the coco schedule is too slow for the fastest autos. I do not know if there is a record for fastest start to finish result, but if there is this strain needs to compete because it is really, really, REALLY fast. Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow. Daily Updates: ### Week 3 Day 1 21:00 9/7 2m/l Start + 2.5ml/l Katana Roots & Zenzym + 1.5ml/l Coco A & Coco B + 1ml/l Zilicon & CalMag + 1m/l PH down - fertigated ~1.5l each In case you are wondering why I am adding start into this mix, it's because my other grows need it still, but I am also starting them on full nutes at 7-8 days to try to avoid the issues you have seen here last week. I decided therefore to just mix one batch up for them all and see how it goes. I really do not think a bit of extra start and roots will bother these girls, but it will make the difference for the others. With a 10l watering can as my only watering tool, part-mixes are highly error prone as I found out last grow series with Queen Citronella and the poisoning incident, and if I mixed up two batches I have to throw most of one away with a + b nutes such as this they don't store for very long once mixed. Anyway the colour is looking better in the new growth and they haven't missed a beat in terms of piling on greenery and height, I think these six girls are going to really put this "50-70cm" claim to the test. ### Week 3 Day 3 20:30 11/7 Photographed. ### Week 3 Day 5 11:00 13/7 2m/l Start + 2.5ml/l Katana Roots & Zenzym + 2ml/l Coco A & Coco B + 1ml/l Zilicon & CalMag + 1m/l PH down - fertigated ~3l each Today for the first time since I planted them up I moved everything out of the tent, and while I did so I inspected and photographed each girl. I found one aphid on one of the plants, which I tried to kill but it evaded my sausage fingers. So I sprayed all 6 plants with Neudorff BugFree. I made the stupid mistake of bringing in a sad little pepper plant for a bit of a boost, I obviously didn't check it. I will keep an eye on it but if the spray doesn't kill them then I will go and find some ladybird larvae. These are all pretty close to each other but I am starting to see two phenos. One is taller the other is thicker. See for yourself! Plants 1-4 are the slimmer/taller plants 5 and 6 are chonkier. I also labelled each plant and will note which plant is which in future photographs as you can follow an individual plant if you like. Anyway these girls are insane . Look at the size and development; 19 days!!!! Tallest is 40cm (plant 1) Shortest is 27cm (plant 6) Lastly, I have been keeping a decent handle on the temps it is now extremely rare for them to exceed 30 degrees unless there is a heatwave, which I sincerely hope there is not. I'll see you in a couple of days to round off this incredible week. ### Week 3 Day 6 23:00 14/7 Photographed wide shot. Really inspected each plant again and I am confident the only deficiency is magnesium. I checked the runoff PH it is sitting somewhere around 6.3. I am going to further increase the CalMag to 1.5ml/l ### Week 3 Day 7 23:00 15/7 Photographed individually. Flushed through with 3l of fertigate with increased CalMag dosage to 1.5ml/l which is now 50% above the recommended amount. I have gone off-piste with the nute schedule... be it on my own head I suppose. Fingers crossed. So the symptoms of the Mg def are on all plants but some worse than others, which has made me think perhaps there was some inequality in the distribution of the reused coco vs new amongst the pots. I suspect that maybe I should have rinsed the old coco first. I have had success with flushes in the past, and considering this issue is relatively minor I am not prepared to take them all out and individually flush through with 30l+. Instead I have overwatered them by about double when they were already fairly saturated so about 70% of the fertigate came through as runoff. Below is my current assessment of the different plants: Plant 1 -------- Previously the tallest plant, now only 2nd she current stands at 57cm tall having put on 17cm in the last TWO DAYS. She is one of the least affected by the Mg def. Her stem is about the 4th thickest. Plant 2 -------- The 2nd tallest plant on day 19 is now only third the tallest plant at 52cm, she also has the second thinnest stem. Plant 3 -------- Around the same height as 3 other sisters on day 19, in the last two days this plant has grown to 58cm tall and is now the tallest plant in the series, as well as having by far the thinnest stem. This girl has put on at least 20cm in the last two days. This plant was the 2nd worst Mg def symptoms. Plant 4 -------- The 3rd shortest plant at 47cm, she has the third thickest stem, and seems to be somewhere between the two phenos. This plant is the most affected by the Mg def. Plant 5 -------- Standing at only 40cm but with a really chunky stem and the 2nd thickest this girl is clearly a different pheno to plants 1-3 and 4. Her leaves are much fatter and bigger and her stem is much much thicker than plants 1-4. Plant 6 -------- Last but by no means least is plant 6, this girl is my favourite, though she is the shortest plant standing at only 39cm tall, she has tight internodes, massive fat leaves, and by far and away the thickest stem I have ever seen on a 3 week old plant. Seriously, seriously chonky. Her stem is approximately double the girth of the 2nd thickest (plant 5). I think this girl is going to be the star of the grow and the highest yield. What do you think? Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========
Likes
3
Share
@Comfrey
Follow
This week I continued with LST and while I bend down my Kush on day 39, the stem bent over. I could fix it and within some days the plant repaired the injury quite well. At the end of the week I was surprised how good she handled this big stress. This is not the most beautiful of my plants but I love her like the other ones. 😍
Likes
2
Share
Love this strain and breeder, he is a Virginia based and local. Super easy to grow.
Likes
4
Share
@pzwags420
Follow
week 3 flower is going great. I increased my UVA lights to 8 hrs on. Gsc and Blueberry have decent bud-lets already on day 17. OG kush has preflowers. waiting on Blueberry muffin to show pre fowers should be soon. At the end of week 3 GSC and Blueberry are doing the best and starting to get more trichomes. Im waiting on OG kush And Blueberry Muffin to really get going!
Likes
6
Share
@Centollo
Follow
Día 42. Esta semana les voy a dar los últimos abonados. Huelen de maravilla y siguen engordando y resinando. Buenos humos!!!
Likes
Comments
Share
@TyRun
Follow
The last week of veg before cutting clones.
Likes
11
Share
From now on, only Reverse Osmosis watter for the ladies, no nutrients applied.
Likes
16
Share
@Dr_Rook
Follow
Qué largo se me está haciendo.. Pensaba dejarlas ya 3 días desde hoy a oscuras y posteriormente cortar, pero siendo sensato las dejaré otra semana más para que terminen de madurar los cogollos de abajo. Claramente dejé de abonar demasiado pronto, podría haber dado 1 o 2 riegos más tranquilamente, pero bueno una cosa más que aprendo para las próximas. Van a estar 3 semanas sin abonar😅 aunque no han mostrado muchos síntomas de deficiencias
Likes
9
Share
@Chubbs
Follow
420 Fastbuds Cherry Cola Auto 🍒 These two finished up beautifully I'd have to say. After getting the chop 1 came out to 230g and the other 205g wet weight. After a 6 days on the dry rack they're ready for the jar to start the curing process. They both came out very similar from weight, height, smell, and flower density. Some awesome genetics for sure 420Fastbuds. The dry weight came out to 97g after cutting out the remaining stems off. Will do an update on the smoke report after a week of curing. Was highly surprised in this strain because one fought me the whole grow but in the end even though didn't look the prettiest still had every quality of the other one that looked amazing. All in all Happy Growing