Likes
Comments
Share
@reirrac1
Follow
She’s been steadily blooming! As she’s gets thicker and thicker her calyxes show off just how much purple they have in them. Still going in often to trim her up and give her room to breathe. Feed pH 6.3, EC 1.9.
Likes
93
Share
Welcome to the Zamnesia Spring Cup 🏆 Hello everyone :-) A lot has happened this week 🤗. It has developed very nicely and its roots have exploded properly 😍. It is also slowly becoming lighter, since it has obviously been slowly consuming its nutrients from the soil :-) That is why it was repotted today, mixing 3 layers with a total of 60-75 g Monster Bud Mix between the soil. Then everything was mixed and distributed well, and the plant used. Unfortunately I noticed too late that I didn't take any pictures of the root ball while repotting 🤦‍♂️🏻. I look forward to seeing how it evolves this week. Above all, I am excited to see how she is doing with the Monster Bud Mix, as I have been used to mixing everything for each wash separately 😊. During the course of this week I will also spontaneously decide whether I will give her an LST, topping fimming, etc., since I have to see how I am in the vegi phase, because the Spring Cup has a limited time 😁. I wish you all a lot of fun watching, have a nice week, stay healthy 🙏🏻 and let it grow ☘️👍 . Zamnesia Spring Cup 🏆 Type: Runtz ☝️🏼 ☝️🏼 Genetics: Zkittlez x Gelato 👍 😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 220 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Monster Bud Mix ☝️🏼🌱💪🏻 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
20
Share
@AdamCajda
Follow
Week 10. A bit behind the schedule considering I switched to 12/12 after week 1 but I don't rush. It was just an experiment to see what;s gonna happen when I switch so early.. Not much I guess :)) The left plant was like a week behind for the first part of the grow and now doing way better then the other one. Not sure what affected the one on the right if it's just genetics or something else but she is little bit slower now. It makes me feel like a light leak so I tightened up the tent and we will see. Fingers crossed it looks very promissing. I also have to leave for 5 days so I have to setup autowatering and hope it's not gonna die till I come back :) See you next week
Likes
22
Share
@Theia
Follow
Week 4 Flower Diary: The Generative Pivot & Structural Reinforcement ​Phase: Mid-Flower / "The Bulking Engine" Light Intensity: 950 µmol/m²/s Environment: 28°C / 52% RH (1.56 kPa VPD) ​1. Environmental Governance: Chasing the VPD ​The primary focus this week has been the pursuit of the "Perfect VPD". As the Invisible Sun intensity was pushed to 950 µmols, the atmospheric pressure was increased to match the metabolic demand. ​The 1.56 kPa Target: Raising the VPD at this stage is a form of Generative Steering. By increasing the "atmospheric pull," we maximize transpiration velocity, ensuring the raw materials from the Biotabs and Bactrex are pulled efficiently into the developing flower sites. ​Heating Optimization: Introduced a Vivosun W70 heater to replace the bar radiator. This provides a more distributed thermal lift, eliminating the risk of localized root zone damage on inner-facing pots while maintaining the 21.2°C root-floor temperature needed for microbial stability. ​2. Nutrient Strategy: Structural Reinforcement ​With the PK Tea currently on a 36-hour bubble, the substrate was buffered today to support the high light load. ​Silicium Flash Top-Dress: Applied a top-dress of Silicium Flash to provide a slow-release mineral foundation. The added Silicon is critical at 950 µmols; it reinforces cell walls and helps the plant regulate its stomatal aperture under high-intensity stress. ​Top-Watering Protocol: Established a weekly 500ml top-watering routine. This serves two clinical purposes: it washes the Silicium Flash into the rhizosphere and prevents the accumulation of salts in the top inch of the media—a common issue in bottom-fed Autopot systems. ​Microbial Maintenance: Integrated a monthly Bactrex recharge into this top-watering schedule to maintain the microbial density required to process organic inputs. ​3. Photobiological Log: Spectral Steering ​The 13/11 photoperiod continues to drive high efficiency via the "Sleep Hack". ​Emerson Effect Efficiency: Running the Deep Red (680nm) and Far-Red (730nm) channels mid-day allows both photosystems (PSII and PSI) to operate in a synergistic series. This prevents the metabolic "bottleneck" that occurs when plants are pushed near their saturation point of 1000 µmols. ​UV Status: While the Solacure Flower Power arrival was delayed, the room is being coaxed into high gear at 1.56 kPa in preparation. Once the bar is deployed, we will initiate the UVR8 process, where the plant perceives 280nm radiation and responds by increasing glandular trichome density as a biological defense.its some interesting science goes on when you blast 280nm photons at a plant. Proteins do mad stuff which I look forward to going on about once the damn light arrives.. ​4. Observations & Baseline ​New flower site photos taken today establish the Pre-UV baseline. Stacking is dense due to the high Phytochrome Photostationary State (PSS) maintained by tmynlighting rig and the plants are currently praying to the light gods, indicating they have fully acclimated to the current 950 µmol load. ​Weekly Tasking: In 36hr Check PK Tea oxygenation and apply at the end of the brew cycle. ​UV Arrival: Inspect Solacure bulbs and program the 15-minute "Acclimation Pulses" for the mid-day peak. ​VPD Check: Ensure RH doesn't climb above 55% during the dark transition. Thanks for looking. Grow well.🌿💚🇬🇧
Likes
4
Share
Likes
19
Share
Let’s Go!! Today is day 31 from seed an these lil baby girls are shooting pistols an showing female productions!! Over the past couple weeks these girls been feasting up an building nice thick structures,building themselves up to get ready for pre flower pretty soon !! Everything is going just how we want it, everything is working properly, our air temp an humidity is stayin on point around 70-75 degrees trough the day and a humidity of 55 - 62% ! Always great! I hope you all enjoy an y’all have an amazing productive day! Peace , love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻Keep them eyes peeled for next week !!🤘🏻🔥💯
Likes
4
Share
@Krissci
Follow
Day 4 - light LST training. This window is very small to Train correctly and not lost any main stems..the knuckle tends to solidify quite quickly and begins to swell if feed properly...making bending by the knuckle risky
Likes
102
Share
Overall I'm really happy that I’ve tried this genetics from Solfire Gardens for the first time. Outstanding flavor profile. The plant had enough time to reach their maximum potential after 68 days of flowering time. Harvested pretty late, but it was worth waiting. Dried the flowers under low temperatures with the 60/60 method for 12 days in the Vivosun VCure. Used my own program settings. Everything worked great. After drying trimmed and put the flowers into the glass jars. Landed perfectly in the sweet spot between 59-60% humidity. The flowers are still curing inside the jars in the Vivosun VCure at a temperature of 15.5 degrees C (60 Fahrenheit). Great product to maintain the quality in storage. Only thing what I would change cultivating this genetics again to top the plant instead of bending the main branch. For everyone who is interested I've also uploaded a video of my grow gear. Enjoy and hopefully see you soon for a new project 😊 To comply with the local regulations everything above the allowed limits have been destroyed.
Likes
1
Share
Amazing strain. Did exploded in the last 3 weeks and fattened up even more to be great main colla about ten gram dried and cure and overall weight of 27 dry g.
Processing
Likes
2
Share
@Valedor
Follow
semana de crecimiento de tricomas, ademas las flores presentan un crecimiento muy bueno, ya están madurando de verdad, el próximo cultivo lo documentaré con fotos mas claras, he aprendido mucho de tenerlas en hidroponia, me gusta y lo voy a seguir usando y explotando
Processing
Likes
12
Share
@Tazard
Follow
Wow what a week. We are at 48” as of day 20 on the Enemy of The State plants (both are the same height now). The two White Criticals were 36 and 38 inches from the top of the tanks and the taller tops on Purple Purple are about 34”. Wedding cake is about 30” now. All my plants seem to love the 5.2 pH. Enemy of the state are on a lighter feed of about 950ppm and wedding cake is still eating from a vegetive reservoir at 1125ppm. Thanks for looking!
Likes
9
Share
--------------------------------- 📅 WEEK 3 --------------------------------- 💧 22.04.2024 - new pots (6L) 💧 30.04.2024 - watering* (300 ml/pot) 💧 04.05.2024 - watering* (500 ml/pot) *(plain tab water) --------------------------------- 💡 light is 40cm+ away, dimmed to 50% --------------------------------- 📰 NOTES All three went to new pots (6 Liter) at monday 22.04.24. This week later are doing way better! The soil (All-Mix) was prepared and watered well - so the plants we're not watered for a week - but looking much better now and start growing compared to the weeks before. Number three looks strange, first leaves almost died. Maybe mutating? But i"ll giver here a chance, since there ist still space in the box --------------------------------- from munich with 💚 ---------------------------------
Likes
32
Share
Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Lst tranings return Nutrients started 0.5gr/1L at day 21 400ML Per Pot Day 24 Grow powder 0.75gr/1L Short Flowering 0.5gr/1L 400ML Per Pot Day 26 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot Day 28 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot
Likes
4
Share
Cut some lower leaves and branches. No smell yet
Likes
28
Share
This week was good, she grow nice, but very slow...have a nice week✌️✌️
Likes
59
Share
@Nebula420
Follow
I really enjoyed growing Honey Peach Auto CBD. Sweets Seeds genetics at the highest level. I advise to everyone Who wants fast, high-yielder CBD strain. Thanks to everyone who follows my grow reports, and Sweet Seeds for nice genetics.
Likes
35
Share
Week 7 of flower and a couple of notable developments following the last update. The WPM issue of course remains but, after only 2 treatments with the sodium bicarbonate the plants have really responded well. That aside, we are seeing some early and potentially progressive signs of nute burn. We’ve topped off the res. Twice with just plain water but history suggests that you gotta be real careful with this to avoid having the opposite problem as well. Closely monitoring for signs of other issues as were really close to the finish now and do not wanna fuck this up… er… again 😬. The colours are starting to show nicely on em now too which is making Id on the burn a little more difficult to discern. Can’t wait to get this one done and finished so we can move on to the next adventure. Based on bud development, we should have no issues with cross-pollination as the males in the other tent continue to mature. About 2 weeks there so should be safely at the finish with these girls by then.🤟. Alls well in paradise yall👍😎👍.
Likes
4
Share
Prima settimana di fioritura...questa creamzilla promette bene....sta crescendo ben forte e robusta 💪💪💪💚💛❤️