Nice hard buds forming this week. I’ve been fooling around with some red paper… I should know better by now 😅 ---------------------------------------------------------

08/30 - DAY 36 - Top watered w/ beneficial bacteria and refilled Jane’s reservoir. - Lowered humidity to ~63% 09/01 - DAY 38 - Refilled Mo. Drinking a gallon a day from the reservoir. Mushrooms growing in Mo’s EarthBox. 09/03 - DAY 40 - Another big defoliation on Jane. - Bent over a few over achieving colas on Mo. At canopy roughly ~500PPFD. 09/04 - DAY 41 - Girls are super happy. Trichomes coming in everywhere on Mo and slowly coming in Jane.

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

I finally installed my net, I love how easy it becomes to bend or acommodate branches. it makes harder the watering part but is justifiable. this will be the second week of flowering and all is looking great Happy grows

Week 4 Happy New Year everyone! Got an explosion of growth between the previous week and now. She must like that top dressing I did last week... closer to 2 weeks ago actually now that I think of it. Any who... she's branching out nicely and I'm just trynna train an even-ish canopy before flipping to flower. She's already showing signs that she's ready. I wanna take a few clones from her in about 2 weeks and let her rock a while longer to recover before we flip the lights so until then, our routine is train, water, and top dress every 2 weeks. Water with recharge every other watering. Watering occurs currently about every 4-5 days. That's all for this week's report 🙌🏾 As always... Stay Highly Medicated & Highly Dedicated folks 🔥🎄😎🌬️🤙🏾

Hello my friendly growmies 👩‍🌾👨‍🌾🌲🌲, Those Fat Banana had a crazy stretch week, more than x3 size last week 😱😱. Each day I up the power of lamp Forming 🦔🦔 I've found 4 new balls on the #2, I've removed them so a total of 8. Now look clear and didn't found new balls.🙏 The #1 the biggest, but both look really pretty 😍. I've made a little train to move the buds site, lot of was under big fan leaves. I've founded lot of thrips in all my plants in the box this week 🤬, I've make an insecticide treatment yesterday. 💦I give water each 2 or 3 days and more and more/plant 750 ml Water + RQS Grow Tab (1/2 for 2.2l ) + cannaboost 1 l Water + cannazym 1.25 l Water + sugar royal @PH6 I'll start the flowering nutes kit liquids from rqs this new week. Lamp @90% Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - TS1000 💡💡 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light RQS - Fat Banana Auto 🍌🍌🌲🌲 https://www.royalqueenseeds.com/autoflowering-cannabis-seeds/487-fat-banana-automatic.html

Jun 10: Getting droopy. Watered less than half gallon of Ph 6.7 water. Jun 12: That watering really gave a growth spurt! Gonna bump the humidity up to a max of 81% til we get further into veg. Jun 13: Plant is tall enough to tie some good looking limbs down and also the main stem to the side. Jun 15: Buckets are getting lighter, but the soil is moist, meaning my humidity was too high. That lead to some mold and algae that I will treat with spray Neem oil. Smells terrible, but should do the trick. Lowering humidity to 65% for a bit, then will probably get closer to 75% over the next few days.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE BS AFTER THEY TOLD ME I NEVER EVER HAVE TO BUY OR WORRY ABOUT FERTILIZER EVER AGAIN. THEY ARE A RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Coming into the week strong. the 2 in rain science bags stretched and are some big plants now, and the shorties in the fabric pots are tryin to catch up. Everything looks good and starting the week with a nice watering gets the girls primed for the week and get the tent nice and humid too! Excited for these ladies!!! ___________________________________ I LST'd the back two no problem but when i attempted the front ones i popped the right one so i quickly backed off till they get a bit bigger. Should be fine

🌿 Grow 🤝 Freunde 🌱 🌿 Update – Tag 55 in der Blüte (DWC) Jetzt sind wir offiziell im Finale. Die Lady’s zeigen sich in absoluter Bestform und wirken klar erntereif. Die Buds sind maximal verdichtet, extrem frostig und stehen stabil bis in die unteren Etagen. Das Canopy ist voll geschlossen, gleichmäßig und schwer beladen – genau so, wie man es sich kurz vor dem Chop wünscht. ❄️🌸 Auf den Bildern und im Video sieht man deutlich: Die Trichome sind überwiegend milchig, mit etwa 5 % bernsteinfarbenen Köpfen – perfektes Zeitfenster für ein ausgewogenes, kraftvolles Endprodukt. Die Sugar-Leaves sind komplett überzogen, Harzproduktion auf Peak-Level.

Wochenupdate - Woche 9 ? 🇵🇦Panama Red🇵🇦 - färbt sich aktuell wunderschön rot/lila. Pistillen nwerden schön braun. Auf den Zuckerblättern sind schon bernsteinfarbige Trichome zu sehen. Ich denke noch 14 Tage! 🐍Hyper Viper🐍 - hat aktuell einen wenig Lichtstress. Leichte Taco-Blätter und an 2 Tops ein wenig LED Bleiche. Ich werde bisschen Licht reduzieren. Sonst machen sie sich prächtig, braune Pistillen und fast überall trübe Trichome. Ich denke auch hier noch 14 Tage! 🚂Ghost Train Haze🚂 - mein Sorgenkind. Sie zwittert leider weiter. Habe viele "Bananen" entdeckt und vorsichtig entfernt. Trotzdem Schwellen ihre Buds weiter und werden immer schwerer. Sie färbt sich immer dunkler - die Blätter sind fast schon schwarz. Ihre Schwester ist ein komplett anderer Phänotyp - Grasgrün und eher schlanke hohe Colas. Ich denke noch ca 21 Tage! Power Buds habe ich jetzt rausgenommen! Alles in Allem schaut es gut aus! 🤞🤞🤞 in diesem Sinne Let IT grow 🌱 🌿 💚

.

3 settimane di fiori

my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 60 days and flowering stage was 70 days total (harvested tops at day 63th) the total weight of dry buds was : top buds 174 G + lower buds 55 G = 229 G my overview of strain with details: the seeds: unfortunately i only got 1 seed cracked out of 5 so i will not know how much this genetic can get different but at least i got the chance to grow once of this wonderful strain the plant : in every stage you can ensure that you are dealing with a high level plant , she will get big so you have to control her height LST and SCROG highly recommended , will grow very well with tick stalks and big fan leaves , has good resistance for stress and will respond very well to stress trainings , she really has gorilla power in herself , fresh buds on plant : buds are very compact and dense even from start , fresh blossoms smells like pineapple and mango , 2 different shades of sweet smells like you hold 2 junks of pineapple and mango in your hand and you smell them together, she is a trichome and resin factory , very very sticky , very oily , strong smell dried buds: very compact and dense , hard as rocks , has dark colors with purple hues inside it , it smells sweet smoke : very smooth and sweet like lollipop , pineapple , mango like , after 2 minutes it'll kick in and you'll get higher and higher with every breath , has a strange and especial high mind high mostly

Some nice color i’m really excited by this lil one i know the taste and quality gon be what i expected

🌸 Flowering Week 7 – Progress Update • Overall Development: Plants are showing signs of severe environmental and physiological stress rather than natural ripening. The "Fade" is premature and driven by nutrient lockout and heat damage. • Leaf Condition: Extreme tacoing and necrosis on the upper canopy confirm that the light/heat levels have compromised the plant's health. • Abnormal Senescence: The yellowing is inconsistent and accompanied by burnt edges, indicating a pH or EC imbalance in the substrate. • Right-side Decline: Certain phenotypes continue to wilt, likely due to localized root zone failure or excessive moisture from the dense cover crops.

Day 37 We started with nutes today Then all day long outdoors From 6AM to 6PM Plus CFL afterwards They rest for 3 hours and then CFL again Btw accidentally snapped one part of one big leave but that okay Since we don't do defoliation on her We guessing it's okay she will recover soon Day 38 Since she's such a queen we wanted to upload a video showing how she starts flowering for the record, thanks a lot You can Always follow me at Instagram @cannagrowersiriuz Also don't forget to add your comment below, it is important to us! We want to learn, any tips, suggestion, more than welcome my friends Happy Growing Day 39 Some mins before installing ScroG Day 40 Wonderful, she's out of there already so huge, full of buds Day 41 she's actually doing great full of buds but those 2 first leaves are a little bit sad looking weird plus those black dots idk and it's turning yellow in between I decided to remove it and well, I'm hoping she's doing well what else I could think of guys any help or concerns? At the end of the day, she's overall healthy and strong Day 42 Time to feed the babies, so we added 900PPM (300ml) floranova grow Followed by 1590ppm (300ml) flora nova bloom to make sure she's got all nutrients balanced well, also added 400ml of plain water after that so they could get a nice run off. I think they're happy and we gonna check on them in a couple days to see how they go, Ph is around 6.2 which is great Temp outdoors from 7-@ 1pm around 25C to 36C Then back indoors Temp is 28C and drop to 22 at night and dawn so they're good and comfortable Keeping humidity lvls around 40/65% top Nice AC and Fan for air circulation Thank you all for your support