Likes
Comments
Share
Nice big fan leaves. I am continuing to open the two branches created after topping and defoliate to get more light onto the perpendicular branches. Just watering, mycorrhizae and microbes as I just transplanted. 12” diameter airpots.
Processing
Likes
3
Share
Really happy with the rate of growth. Both plants responded well to training and have bushed out pretty well. Going to let them stretch out from now on. God's Vagina has finally shown she is a female! Both plants are now growing at roughly the same speed.
Likes
80
Share
~MERINGUE by DUTCH PASSION~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This strain by Dutch Passion is one of my all time favorite strains that I've cultivated previously with phenomenal results so I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! I'm going to things a bit different this time around. I have a brand spanking new AC Infinity 4x4 tent and was just given one of HLG's newest lights for 2022, The Blackbird! I've got this 600w monster hooked up to my Trolmaster Hydro X Controller so I've got full control over timing, dimming and Sunrise/Sunset. This beauty is going to annihilate the 4x4 for sure! 😎👍 I'm going to grow her all by herself and veg her for around 70-90 days after witch I'll install a trellis net in the tent and spread her out. Once she's recovered from her 'net training' I'll flip her to 12/12 and hang on! 🤪 It's ALWAYS been a blast for me growing strains from Dutch Passion because their genetics are extremely stable which allow me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth and they REWARD you with some of the most EPIC cultivars you've ever grown! 👍👍👍 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~STRAIN INFORMATION**~ ~Unique USA genetics~ ~Very sweet aroma and fruity flavors~ ~Compact buds with one of the highest THC levels~ ~Quality of the flowers is top-notch with an amazing bag appeal~ Meringue has a very sweet aroma and fruity flavor Meringue is a hybrid indica/sativa strain with a complex fruity aroma that leans to the tangy side of the spectrum but a bit sweeter. It smells like oranges, mango and honey with some earthy, sour hints. Her aroma profile is also very pungent. Meringue is a connoisseur’s delight Meringue is a high-quality strain. She might not be the biggest overall yielder but the level of quality is definitely a reason to keep growing her again and again. Expect solid yields of stunning looking buds. Although the flowers can be a bit smaller, they are rock-hard and thus will still put down some weight on the scale. When handled well she will deliver you some of the most beautiful looking nuggets on the planet. The dark hues in the flowers and leaves makes the white layer of resin really pop out for an eye-catching bag appeal. Meringue is grown by crossing Wedding Cake x Animal Cookies. Wedding Cake, also known as Pink Cookies, is a USA cross of the famous Girl Scout Cookies and Cherry Pie. These 2 strains make for the intense sweet tangy taste of the variety. It is also noted for its extremely high THC content. Animal Cookies is another popular USA variety which is a child of the legendary GSC line and Fire OG. She is a clone-only variety that flowers in about 9 week and grows very dense and compact buds that can show some dark coloration in the flowers. This strain has a sweet and sour aroma with a strong body-effect that will suit the more experienced smoker. -The genetics used to create Meringue ensure the following characteristics- ~A sweet tangy aroma from the Wedding Cake ~The dense, compact and colored buds from the Animal Cookies ~High potency levels thanks to both the Wedding Cake and Animal Cookies genetics Meringue is top-notch variety with a high cannabinoid profile and an intensely sweet, pungent aroma. ~Meringue Effects~ Meringue is a crossing of 2 popular hybrid USA strains. She leans a bit more to the Indica side which is shown in the shorter flowering time and bud structure. The effect of the variety is quite euphoric with a powerful sense of well being and relaxation. When you smoke more during a short period of time you will be rewarded with a deep body stone which could give a couch-lock experience. Meringue feminized seeds vs Lemon Meringue strain Any fans of the USA Lemon Meringue variety will love the Dutch Passion Meringue. Both varieties share a THC rich high and a connoisseur flavor profile. However feminized seeds of the Dutch Passion Meringue are thought to produce frostier plants and a superior vaping experience. -The growth and flowering time of Meringue- We recommend a veg period of about 4-6 weeks for these feminized seeds. Meringue can have a bit of a slow start while showing some stretch during the latter part of the grow period. On the other hand, she doesn’t stretch a lot during flowering, so she can be a bit challenging to understand. Meringue can have quite an unusual growth pattern with leaves that have elongated stems and which are pointed upwards with some distance to the main stem. This requires the use of certain growing techniques, like leaf tucking, to make sure she receives sufficient light from top to bottom. Meringue stays fairly compact and within 3-4 weeks there is already a lot of resin on the flowers. After 6 weeks of flowering the buds start to show orange pistils, they seem to ripen quite fast. Luckily all plants show amazing resin production, making them very appealing to the eye. The flowering time is about 8 weeks. In combination with the recommended veg phase, it will take around 12-14 weeks from cannabis seed to harvest. The yield of the Meringue Meringue produces XL harvests of top-notch quality cannabis; between 400 and 500 grams per m2 is possible. The buds are really frosty and dense. Our expert advice: Meringue is the perfect strain for professional home growers or licensed producers looking for a variety with the highest possible resin levels. Buds are literally coated in layers of resin. We would recommend to look out for the plants which show the most hybrid leaf and plant structure. These are generally the biggest and best yielding phenotypes. Consider using a UV light during the last few weeks of flowering and notice how the trichome production goes into overdrive. If you’re looking for something truly unique with an amazing bag appeal then please look no further, Meringue is the strain you need! ~More info about Meringue Meringue isn’t the most straightforward plant to grow so she can be a bit challenging to understand. The thing that stands out the most is the slightly unusual growth pattern, therefore more leaf picking is necessary, otherwise the lower buds will not receive enough light. Because of the slightly larger internodal distance, buds don’t have the tendency to become really big, which could make her a bit more interesting for growers with higher humidity levels. There should be enough fresh air around these flowers though, because they become rock-hard. Buds are covered in trichomes, lab results showed all phenotypes were close to and above 20% THC, suited for hardcore smokers. ** Credit to Dutch Passion ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seed was lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where it stayed until a tap root emerged. ~Planted into Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerged from the Jiffy Pellet she was transferred to a 1qt plastic pot. As she grows I'll be moving her into larger pots along the way up until she's in her 10g fabric pot. ~Grown in a 10g fabric pot filled with Mother Earth 70/30 Coco/Perlite medium and fed Dutch Pro nutrients throughout the entire grow with de-chlorinated water ph'd @ 6.2-6.8. ~19/5 light cycle for vegetation, then 12/12 to flower with supplemental UVA added during the last weeks of flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~ Supplemental co2 provided throughout vegetation and flower - monitored and controlled by an AutoPilot APC8200 co2 controller. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked the seed for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉. After 30 hours she had not popped open yet so I soaked another seed for 3 hours and then into a paper towel and onto the heat mat it went. 12/3- This afternoon I checked and the seed had a root that was about 1/4 to 3/8" so at 5 pm I transferred it into a Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By the next morning she had her cotyledon leaves opened! 12/5- Well this is Day ONE for the Dutch Passion Meringue! I'll keep her in the covered/heated Jiffy tray until I see her roots beginning to emerge from the peat pellet, then I'll transfer her gently into her 2qt plastic starter pot to begin growing. 12/7- Today when I checked her, she had roots just starting to emerge from her pellet, so tomorrow I'll transfer her into her 'starter' pot. 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
Comments
Share
Ok growmies new method for me as I am trying SCRoG for the 1st time. These girls were getting a little leggy, so I am giving it a go. Apologies for the lighting on the photos & video; it's a bit more challenging when they are tethered to the tent. So far, so good as they weave their way through the mesh.
Likes
1
Share
Wochenbericht – Pflanzprojekt (11. Woche – 3. Blütewoche) In der elften Woche entwickeln sich die Buds der Sorten Big Bud, Moby Dick und Amnesia XXL sichtbar weiter. Die Blüten nehmen an Größe und Dichte zu, was auf eine gesunde Entwicklung hinweist. Leider haben die kalten Tage die Temperaturregulierung in der Box erschwert. Die Temperaturen waren über einen längeren Zeitraum eine Herausforderung, und es war notwendig, zusätzliche Maßnahmen zu ergreifen, um das Klima für die Pflanzen stabil zu halten. Trotz dieser Schwierigkeiten sehen die Pflanzen weiterhin vital aus, und die Blütenentwicklung verläuft gut. In den kommenden Tagen wird darauf geachtet, die Temperatur weiterhin zu kontrollieren und den Pflanzen optimale Bedingungen für die nächste Phase der Blüte zu bieten.
Likes
1
Share
@Manball
Follow
This adoptee has been growing nicely, although she suffered from stress because she wasn’t taken care off very well (she & other had a to find new Homes). But after having it for 4 weeks, now entering the 5th week (of flowering, I Guess) We are getting closer and closer to harvest. Today’s pictures are from Sunday, we are maturing well :3 there will be only 3 more feeds with nutrients, then flush, an wait for the ideal time to harvest.
Likes
53
Share
Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - Day 52: the end is near - Day 53: Trichomes check from #1 and #2 - looking super good almost all cloudy, a few amber and clear. perfect point to chop - Day 54: this one is finished, let's chop them both #1 & #2 !! ✂️✂️✂️ - both phenos got still super purple beautiful leaves - now its time to dry inside the tent at about 60%rh and less than 20°C/68°F trying to get it even lower for the next 10-14 days ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ P.C.R. by Art Genetix https://www.artgenetix.world/product-page/p-c-r --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Likes
1
Share
@BruWeed
Follow
11/10 - comenzó su cuarta semana de floracion. Su evolución fue muy notoria, de un dia para el otro se desarrolló mucho. No tuve problemas en ninguna etapa, hasta el momento se encuentra perfecta. Los cocos son muy resinosos y grandes.
Likes
19
Share
Day 63: Another week passes and the girls are now building nice long Colas all over . Buds are looking good and smelling so pineapple/fruity now. Buds are looking nice and hairy without looking airy. #1 In the organic soil is overall the widest and area hungry lady but her sisters are taller . #2 has been quietly pushing her way through the middle position in the grow and has some nice fat looking buds forming. #3 Is a surprise for me as I wasnt sure it would make it this far. No matter what I do , the leaf continues to look awful but the size of her and her now forming so many stacking buds , I am glad I kept her going now !. I do think at least 3 weeks for these ladies before harvest but hope to give them room to swell when the space is opened up.
Likes
71
Share
Hello everyone, 🌱 On June 6, 2021.. Day N°66 🌱 10th week of growth for my three Feminized Cheese.🧀 My plants are fine and beautiful. 💉 : I gave them CalGreen from Metrop for the Cal/Mag deficiency because of the brightness of the Led lamp.. 👍 🔦 : LED lamp Hainning New light 320 watts at 35% power and 50 cm canopy. www.zamnesia.nl That's all for now my friends, thank you very much for coming to see my plants, do not hesitate to Sub and I will follow you back.. Take care of yourself and your loved ones. I wish you only happiness with your plantations.. 😘 See you soon.. 💨
Likes
6
Share
Straightforward with nothing to report out of the ordinary. I top watered on day 56 then let them dry back prior to harvest (day 61). Nice mix of milky and amber trichomes. Harvested early morning prior to lights on.
Likes
3
Share
@UrbanBoer
Follow
My beautiful runt, is showing slow healthy progress, I do not want to change anything, because I might unbalance things, no use in fucking up a good this, the grow medium is working, I must expect this rate of growth due to this amount of stress from defoliation when it was relatively a seedling. But these bonsai size babies pack a punch in the end, I cannot wait for flowering to begin, I am going to dose her with my liquid compost, I read about honey been another nutrition supplement, I’ll have to give it a try, but I am going to only use honey as an all in nutrition supplement. I always ask myself if I group hard waste into the 3 sisters Nitrogen, Potassium, Phosphorus would my plants be healthier and grow quicker and bigger.
Likes
33
Share
@burnerac
Follow
Day 57: Added one gallon of pH 6.5 water with nutrients. Day 58: Used super cropping (hope I'm saying that right) on the tallest branch to make the canopy more even. Day 59: I am not watering enough. Day 61: Sadness. I was attempting supercropping and snapped the stem of what I thought would become my largest cola. I have taped it but now feel I've topped my auto.
Likes
7
Share
Day 40F Today Reservoir is currently empty & aqua-vale full on each autopot. I refill the tank with 10gal water + a mixture of boost 200ml then I’ll PH adjust & turn on my reservoir on day Day 45F. Last video i support the heavier branches with yo-yo