All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Showing lots of white hairs on the bud sites it’s alive

Week 4 (1.8.26 --1.15.26) took photos on 1.12.26 1.13.26 Transitioned to bloom nutes

9/16 Day 8: transplanted 3 of them into 1 gallon plastic pots. they werent very rooted but the roots they did have were healthy and thick. will transplant the others as soon as i can. Up potted about half of the tent. i need to set up another tent 9/18 day 10 transplanted the last 2 plants into 1 gallon pots. im reusing soil with them and i dont normally do that. hoping that there arent any random issues to pop up. 9/19 finally numbered the plant's. #1 is the one that's looking more sativa leaning. she has longer petioles or fan leaf stems. Longer, thinner leaves and has stood out from the rest from the very beginning. im going to use the terms indica/ sativa and hybrid as generalized terms. on the other end #5 is super short and tightly spaced nodes. has a more even indica style look to her. #'s 2-4 i have noted as being "hybrid" as in they look to be a mix of both and not on one end or the other such as #1 and #5 are. also onr of the hybrid ones has super thick indica maple leaf style leaves that stands out as well. these are more so for my notes and i understand that these are all technically hybrids 60/40 sativa/indica i believe.

Hi guys! How are you? I had to disconnect for a while but now we are! I am in the fourth week with and my cuttings, I have repot in the final jar of 22 liters. It was a bit difficult and stressful for the plants. I had to put the main stem further down to allow it to root and I used tppping. The plants took a little longer to react but now it's better! Thanks a lot to everyone I will keep you updated!

Day21- the blueberry is really starting to blowup. I have a feeling she’s gonna be a big one. Grapefruit was having some problems but seems to be rebounding nicely. Very light lst this week and won’t do much more but will have to defoliate.

Divided into two boxes 14 in 1x1 20 in 120x120

Week #10 Baby Boom By Kannabia Week#10 Dec.30th-Jan.6th Baby Boom Week #10 she had started to get trichomes on her this week as well as her buds are starting to become dense and tight. She definitely has more of the sativa bud structure and growth as compared to other Indica plants!!

week 15-16 1 nutrient water 1 non nutrient water LsT and Scrog Diesel and Mimosa Harvest day 62 start 12/12 light period (genetically damaged plants) 2 break up cake day 67 start flowering

Hay un instante en el que el cultivo deja de prometer... y empieza a cumplir. 🌸 Esta semana, Maple, Glaze y Sprinkles han dado el paso más esperado de todo el ciclo: la entrada en floración. Después de semanas construyendo raíces, hojas y estructura, las tres hermanas han decidido que ha llegado el momento de enseñar para qué nacieron. El crecimiento continúa siendo excelente. El armario rebosa vida y cada planta mantiene una estructura fuerte y muy frondosa. Se realizó una defoliación muy ligera, únicamente para mejorar la entrada de luz y la circulación de aire, sin alterar su desarrollo natural. 📊 Condiciones 🌡️ Temperatura: 24 °C 💧 Humedad: 60 % ⚡ EC: 1.0 💡 Luz al 80 %, situada a 1 metro de la canopia. Durante la semana solo han recibido agua junto con una nueva aplicación de Great White Premium, dejando que el sistema radicular siga trabajando mientras la planta dirige toda su energía hacia esta nueva etapa. Hubo un pequeño detalle que llamó nuestra atención: algunas hojas aparecían ligeramente caídas. Compartí la duda con la comunidad de Grow Diaries y las opiniones coincidían en dos posibles explicaciones. La primera, un posible exceso de agua. La segunda, y quizá la que mejor encaja viendo el estado general del cultivo, que las plantas simplemente están redirigiendo buena parte de su energía al estiramiento inicial y a la formación de las primeras flores. Sea cual sea la causa, lo importante es que las tres siguen mostrando una salud excelente, sin síntomas de carencias, plagas ni estrés. Cada hermana mantiene su esencia. 🍁 Maple continúa haciendo honor a su reputación de líder, creciendo con un vigor impresionante y ocupando cada vez más espacio. 🍩 Glaze sigue siendo la definición de equilibrio. Compacta, elegante y constante, como si supiera exactamente cuál es su papel en esta historia. ✨ Sprinkles, con su personalidad inconfundible y aquellas hojas siamesas que la hicieron especial desde pequeña, sigue demostrando que ser diferente también puede significar ser espectacular. El aroma empieza a hacerse más presente cada vez que abrimos el armario. Todavía es sutil, una promesa más que una declaración, pero basta para recordar que la floración ya está aquí. Hasta ahora el cultivo ha sido una historia de paciencia. A partir de este capítulo empieza la historia de las flores. Y tenemos la sensación de que Maple, Glaze y Sprinkles todavía guardan sus mejores páginas para el final. 🌸🍩

Hello!, Day 60 Flower I just done the my first harvest ever. Gelat og has cool looking buds, After seen the BUD ROT on one single bud in day 59 yesterday , Today in Day 60 i just cut the plant down for Dry. Going to WASH the buds with H202 (half of them) and going to dry for 10-14 Days and in to Jars for another 14-21 Days as I learned from fellow growmies. Thanks for everyone who support me through my First ever grow. Thumbs up guys. Day 60 - Harvest - 02-01-23 Day 01 - Dry - 02-01-23

🌱 Divine Seeds Germination Report 🌱 Hey, fellow growers! 🌿✨ Welcome to the start of an exciting journey with Divine Seeds! We’ve kicked off our run with some incredible genetics: Moon Rock, Opium, Fractal, and Big Demon. Let’s dive into the germination process and introduce you to the amazing world of the CannaKan method! 🌟 The CannaKan Method: A Game-Changer! 🌟 The CannaKan method is revolutionizing the way we germinate seeds, ensuring higher success rates and stronger seedlings. Here’s why we love it: 1. Optimal Hydration: The CannaKan method ensures the seeds receive just the right amount of moisture, promoting rapid and healthy germination. 2. Temperature Control: By maintaining a stable environment, we provide the perfect conditions for our seeds to sprout. 3. Aeration: The method enhances air circulation, preventing issues like mold and damping-off. 4. Root Development: It encourages robust root growth, setting the foundation for vigorous plants. 🌱 Seed Germination Progress 🌱 Let’s check out how our Divine Seeds are doing with this stellar method: 1. Moon Rock 🚀 • Germination Rate: 100% • Details: These seeds sprouted quickly, showing off their vibrant energy. The seedlings are already reaching for the stars! 2. Opium 🌸 • Germination Rate: 95% • Details: Opium seeds are flourishing with elegance. Their delicate sprouts are a sight to behold, promising a beautiful journey ahead. 3. Fractal 🌀 • Germination Rate: 85% • Details: Our shy Fractal seeds took a bit longer, but they’re coming through with unique patterns. They remind us that every growth journey is special. 4. Big Demon 💪 • Germination Rate: 100% • Details: True to its name, Big Demon seeds are growing strong and bold. These seedlings are the powerhouse of our garden! 🌟 Key Observations 🌟 • Uniformity: The seedlings are consistent in their development, thanks to the precise conditions of the CannaKan method. • Health: No signs of disease or malformation. The CannaKan method’s optimal environment is working wonders. • Vigor: The seedlings exhibit vigorous growth, indicating a healthy start. 🌱 Next Steps 🌱 As our seedlings continue to grow, we’ll: • Monitor their progress closely. • Transition them to their next growing medium. • Provide the best nutrients and care to support their journey. Stay tuned for more updates as we nurture these incredible plants. We’re thrilled to see how they’ll flourish and share every step of the way with you. Happy growing, and may your gardens be ever green! 🌿💚 #DivineSeeds #GerminationReport #CannaKanMethod #MoonRock #Opium #Fractal #BigDemon #GrowDiaries #PlantMagic #GreenThumb Germination method 🌱 @thecannakan Genetics @divine.seeds Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_officiala 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #GreenJoy As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚

Week 9 day 1 video pheno. Gonna chop this week Week 9 day 7 well chop this weekend so on week 10 Day 1-2. Just waiting on a light to reveg one. Everything is magic

Into week two all cuttings have taken 8 have been topped, spacers have been deployed to train branches 3cm spacers I will increase the size of spacers once the branches develop a little more. about every 3 days Is required depending on how the strain performs. this is a more creative method of growing with the final picture of your media in mind {peecock effect}. once the media has starched I will snap on the spacers to create the scrog for a level canopy, holding the outer plants left and right further out to the left and right for more light exposure to develop my flowers to there full potential. middle of week 2 I put the spacers together to make the scrog mainly two train the left and right rows of plants outwards for more space in the middle of my canopy.

I never know what to put here. Maybe thanks to the 2 people that look at my diaries?

Total de dias 29 - 31/08/2021 ( Mais um dia e vou mudar para floração.) Faco 30 dias de vegetação Total de dias 30 - 01/09/2021 / Rega ( mudança de horário para 12/12 fase de Floração ) ( Fase de Floração ) Total de dias 31 (F 01) - 02/09/2021 Total de dias 32 (F 02) - 03/09/2021 / Rega com um 1ml de Bloom. Total de dias 33 (F 03) - 04/09/2021 Total de dias 34 (F 04) - 05/09/2021 / Rega apenas com agua

10/10/21 new week for Hyper glue Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely one hyper glue has to wait for main LST 12/10/21 The other hyper glue got LST clip on the main and think this was one of best ones so far 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

January 26, 2021 (Week 3, Day 22): Today ended up being an unexpectedly big day. This morning when I checked on the plants, they'd grown another 1.5" over the last 24 hours. They're basically growing out of control at this point. Every plant had a fully developed sixth node that was beginning to unfurl. So I decided to water the plants with 1000ml + 4ml pH Perfect Bloom + 4ml pH Perfect Grow + 1.5ml Cal-Mag Plus + 5 drops of pH down (6.5 pH solution). After that I took the plants out from the tent and began the topping process. I was pretty nervous about getting the snip in the right spot, but I think I've done it correctly. I topped each plant at the third node, then I cleaned all the growth below the node. After that I used rubber-coated garden wire to tie the growth sites to the fan leaves to promote lateral growth. Unknown 2 is definitely the runt of the group and my manipulation of the plant really pissed it off and it started to go kind of limp, so I decided to add a little extra support to the plant until it gets a bit hardier. I think it will take several days for it to recover from this process. The other plants however seem very strong and took the topping like a couple of champions. Gelato 1 and Unknown 1 seem to have great genetics and they haven't skipped a beat since germination. I decided to ditch Unknown 2's top but took clones of the other two plants. This process is flying by so far. Fingers crossed the plants continue to thrive even after my butchering. I've adjusted the humidity in the tent so were now averaging 65% rH and 77℉. Hopefully no other news today! January 27, 2021 (Week 3, Day 23): 24-hours post-top and all the plants have perked back up and I am already seeing growth from the two nodes I left on each plant. I added simple binder clips to the outside of my pot and redid the training on Unknown 2. Since topping, Unknown 2 went from pissed off to happier than ever. However, I have finally run into my first problem. The leaves on all three plants are starting to blotch. I touched one of the blotchy spots and it was crisp and began to crack. Soil is still moist from the watering yesterday. Other than irregular spots, I can't seem to find anything else wrong with the plants. I have a Vivosun pH meter which I've heard can be junk - so I am kind of suspecting my pH is too low. But I'm going to post up a grow question today to get a couple of other opinions. Plants still seem really healthy even with these blotchy patches on their leaves. Averaging 65% rH and 78℉. *Update: The damage on the leaves of the plants started to progress - so instead of waiting around watching my plants get crunchy, I decided to take action. I just flushed all three plants with 4 liters (1 gallon) each of filtered water pH'd to ~6.0. I am getting runoff of around ~6.5-6.6 which tells me the soil is too basic or alkaline. I had read this soil I am using is acidic, so I was feeding with a ~6.5pH solution. From now on I will feed with a ~6.0pH solution instead in an attempt to avoid these pH fluctuations. Before flushing with pH'd water, I tested the soil and all were sitting around ~7.1-7.2 pH. Obviously too high. Got tons of runoff by flushing. Here's to hoping we'll see a difference in leaf texture and color in the next 24-48 hours. This pH problem reared its head at an ugly time since I just decided to top the plants. I think I'll be sure to water with 10-20% runoff from now on so I can keep an eye on the pH regularly. January 28, 2021 (Week 3, Day 24): The last 24 hours were a little scary. As a new grower I wasn't really sure what to expect, and this was my first major challenge. All three plants are now scarred on the main fan leaves due to my inexperience. Gelato 1 looks like it took the worst of it. After flushing yesterday I noticed the progression of the leaf damage stopped almost immediately. Then the leaves began to fill in the crunchy green spots with bright orange around the edges with brown in the middle. It was really strange to watch. The leaves on all the plants are supple, they're just striped with ugly orange and brown scars. It also seems like even with the problems, the plants are continuing to thrive and grow at a surprising rate. Even with the fluctuation in pH and the flush I didn't see drooping from any of the plants. So they seem healthy despite their appearance. In fact, Unknown 1's fan leaves are so happy I've had to pin them down as I was getting too much vertical growth from the cola tips. I think I may have flushed at just the right time. I've never seen something progress on a plant so quickly before. The new growth on the plants seems perfectly healthy without any mottling or spotting. The second node of each growth tip on each plant is starting to unfurl already. All the stems are fattening up as well. It was the first night of 20/4 lighting schedule. Temperature dipped to 70℉ with the light off, but the humidity stayed constant. Average of 65% rH and 75℉. Hopefully we'll continue to see good progress with the new growth over the next several days. Once I top the second set of growth tips I'll most likely clip these ugly fan leaves so they'll stop taunting my inexperience every time I open my tent. 💀 January 29, 2021 (Week 3, Day 25): Seems like the plants are back to growing extremely fast. The scars are getting brighter and the brown parts in the middle have went from crispy to semi-supple. The new growth is bright green and even in color. I had to retrain every plant this morning to keep vertical growth from the growth sites tied against the fan leaf stem. I had to use a second set of ties to tie the second node down. So far my training seems to be working. All plants are working on their third nodes on both growth stems. I'll top once the fourth node begins to develop. The medium is still very moist from the flush two days ago. I don't anticipate having to water for two or three more days. I want the medium to dry out almost completely before I water again. I'll continue with light nutrients - but I'll make sure to run my pH down to 6.0 and I'll also be upping the feedings to 2.5-3l per plant to attain some testable runoff. My new Aperta pH meter showed up yesterday, so I hope to have more accurate readings going forward. Averaging 65% rH and 76℉. Nothing else for today. January 30, 2021 (Week 3, Day 26): Growth sites are stretching nicely along the fan leaf stem. Retrained in a few areas. Noticing slight blotching on Unknown 1's growth. Also seems very dark green with slight burn and dropping at the tips. Conducted soil slurry test and came back around ~6.8 pH. I am suspecting slight nitrogen excess. PPM was very high for this stage at around 1200. Next watering I will skip nutrients as I think the roots are beginning to expand through the pots extensively and may have access to too much nitrogen. Growth is still looking nice and fast. Plants are stretching a bit more with the 4 hours of darkness per night. Averaging 65% rH and 76℉. January 31, 2021 (Week 3, Day 27): The nodes on the main stem of every plant are beginning to swell considerably. Growth sites on all three plants are beginning to unfurl their third node. The nutrient burn on Unknown 1 isn't getting any better, but it also doesn't seem to be progressing. I'm hoping it's just a very slight excess, as it doesn't appear to be slowing down growth or causing any major issues. Gelato 1 and Unknown 2 are thriving and new growth looks perfect. I think the genetics on Unknown 1 may be a little more sensitive to nutrients. Unfortunately since I don't know what the plants are, it has made researching strain tips kind of difficult, so I've been treating every plant the same. The Gelato seems the healthiest of the three plants and is growing vigorously. Because of the training it's starting to look like a salad. I'll go for vertical growth after I perform the second topping. I don't plan on having these plants any taller than about 3 feet, so I anticipate having to switch to flower around week 6 or 7. If the growth keeps up, maybe even sooner. I retrained all the plants today and pinned down Unknown 1's fan leaves to encourage horizontal growth. The cola stems are getting huge and I was able to take off my first set of training braces. I also switched Unknown 1 and Unknown 2 in the tent to promote even growth. Medium is still moist from the flush several days ago. I'll water in a day or two. Averaging 65% rH and 75℉. February 1, 2021 (Week 3, Day 28): Medium was pretty dry this morning. Watered 6.0 pH 2 liters per plant with 2.5ml/l Cal-Mag + pH Down and without other nutrients. I think I'll hold off until flower to give nutrients to the plant again. I was getting very high PPM readouts during my flush, so I think the plants have plenty of food to get through the next three weeks. Just giving a small Cal-Mag supplement each feeding. Got about 10% runoff per plant. Runoff sitting around ~6.7-6.8 pH. Still pretty high, but I am hoping continually watering with a 6.0 pH solution will slowly lower the pH of the root-zone. Plants are growing quickly and I had to pin down the third node on each stem today. All of them are looking more like a salad every day. Fourth node is almost completely out - I'll wait for it to unfurl and top either tomorrow or the next day. Plants are looking good. Unknown 1 still looks to have a slight nitrogen toxicity, but doesn't seem to be affecting the plant's health much. Averaging 65% rH and 77℉ Nothing else to report. Looking forward to next week - the second and last topping will happen in the next few days. After the stems grow horizontally enough I'll switch to vertical growth. I'll aim for about 14" tall and then switch over to flower. Hoping that will be around week 6. Just picked up some awesome flowering powder I am excited to try in a few weeks. Plants are chugging right along! Happy growing everyone! 👽

📅 Week 13 | Days 92–98 📅 🌼🌸🌺 Flowering Phase 🌼🌸🌺 Day 98 🌞 – Oreoz 🔸 Oreoz is looking like an absolute showstopper this week. The buds are incredibly dense and completely frosted with thick, glistening trichomes – it almost looks like they’ve been dusted with snow. Resin production is off the charts, especially on the top colas. Trichomes: Mostly milky with some still clear – no ambers yet. She's not quite ready, but getting close. 🔸 Climate control has improved. Humidity started the week at 63%, but with the dehumidifier now running and all clip fans at full power, it's being maintained steadily between 50–60%. That little climate shift is definitely helping – the buds are chunking up without any signs of stress. The slight 2–3°C increase in tent temperature is worth it. 🔸 Nutrients: 1 week of Overdrive (Advanced Nutrients) before the flush phase. Water intake has already slowed down noticeably – another good sign that the end is near. 📈 Current Conditions 🌡️🔆 = 27°C 🌡️🌜 = 20°C 💨 VPD Target = 1.4 - 1.6 💨 Humidity = 63% → Target: below 60% 🔦 PPFD = 900 µmol (12/12) 🔦⌚ DLI = ~38 🛠️ Setup (unchanged) 💡 Lights: 2 x Sanlight Evo 4-120 @ 90% ⛺ Tent: 120 x 120 x 180 🍯 Pot Size: 18 liters 🌱 Medium: Bio-Bizz Light Mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap water (EC 0.5)

Opium grows and grows and just didn’t stop 😂 144cm now lol He should stop with that and bring the energy into the buds