Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
@Tazard
Follow
Flushing this week. Looking forward to her.
Processing
Likes
13
Share
@Ghosttown
Follow
Day 70 Bloom time checking trikes. Clear but think and long. Good head forming on trikes. I'll try to take some pics. Check em out. Day 71 Bloom. Day 72 Watered them because the pot seemed light. I also upgraded my grow room with a sensor that records humidity and temperature 24 hours a day and uploads it to my phone to see high low or potential problems. I checked the trichomes with a Jeweler's loupe in my microscope and they're still clear possibly turning cloudy. Maybe 10% cloudy Day 73 Same for trikes at day 72. The plant in the front left looks like she's suffering from some deficiency. So I'm going to give her some spot treatments of some quick nutrients. Day 74 I hope I don't burn her. But I feel I need more than a micro dose. Friend dropped off some Overdrive. I'm gonna dose them tonight. I keep thinking of the song should I cut or Let It Grow. If no cut tomorrow maybe double should I cut or Let It Grow now. LOL can you get the song Day 75 Bloom plants not showing signs of stress from feeding. Gonna hold off on pics for a few days to show a greater change. Day 76 The plant is showing nanners so I'm pulling her from the grow tent for 48 hours of Darkness then I'm cultivating her. The other plants are still fattening their buds with white stigmas so I'm going to let them go a few more days.
Likes
5
Share
Going to mainline this plant, was topped today at the 3rd node. Interested to see how this pheno turns out as I've done a few runs with this strain recently, both from seed & clone. Two very different phenotypes, 1 grew very bushy with bigger buds & the 2nd was quite different with smaller buds. Both were pretty similar when it came to quality & potency but phenotype 1 yielded more each time around an ounce +. She is in week 3 day 16
Likes
3
Share
Week 4: Girls have responded well to nutes. Defoliation started this week. White spots started showing, After research we believe this to be because of our hard water and getting water on the leaves. We also started LST using fishing line, however this did not work so we removed it.
Likes
3
Share
Sie wachsen aufgrund der verschiedenen Bedingungen auch sehr unterschiedlich.Während die eine im Wohnzimmer sich sehr gestreckt hat und kleinere Blätter hat,ist die im Zelt sehr kompakt.
Likes
47
Share
@inversi0n
Follow
A little increase nutrients. Now I feed 1 time pH Perfect (Micro, Grow, Bloom) in double amounts, B52, CalMags, Sensizym and bacterias. 2 time Flora(Micro, Grow, Bloom, BigBud )in double amounts, B52, CalMags, Sensizym and bacterias. By the end of the week i ran out of BigBud and Flora Grow. Don't know if need to buy more of it or not. Despite I had lower humidity, it looks like she's still drinking less water. To be honest, it's first time, when i see my plant drink that small at this stage. I defoliated a lot this week, dozens of leaves every day. Although this time, I cut not only big fan leaves, but also small ones in the lower center of a plant. I also cut down some lower buds to lollypop the plant a bit. But since most of the lower buds are still even not developed to the size, when it may be cut down easelly, I think i will continue doing it in the next week. Lightning is also not perfet for the grow. Lamp has enough power to maintain the plant, but it's shape leaves much to be desired, it's too concentrated it the center with very small light at the sides. It allows me understand, that i have mainlained too much, I should've stopped with 4 colas. I was afraid i wouldn't have enough space, but the problem is not with the space, but with lights now. It's funny and weird how the buds are looking now. Some of them are pretty big already, some are just formed. And all of which are located in the top of the plant, they can't even receive equals amount of light even there. Smell is becoming from 'just bud smell' to 'very sweety buds' now. It remind me the smell of Zkittles a lot.
Likes
7
Share
Likes
38
Share
Hello everyone! without many words! 100% in perfect condition !!!
Likes
17
Share
@Chucky324
Follow
Hello. This is the end of week 2 and the beginning of week 3 of flowering. These girls sure stretched this week. Wow. I see 1 top about 10 inches from the top of the tent. That one branch might get super cropped if it keeps going up. Near the end of this week I want to get in here and do a final trim/prune. Paying attention to fan leaves that don't get enough light on the bottom and fan leaves that block light on the top. If you have a big plant try to leave 4 to 8 fanleaves at the end of each branch, with 8 on the lower branches and 4 on the smaller upper branches. I will also have a good look at the small branches to see if they are sucker branches or if they will put out a small bud. I know that I will put the plant into shock for a few days with the trim/pruning, but when the plant heals and starts to grow again it will go right into resin production, full speed. I will, generally not touch the plants till the end after that. I might take a few fanleaves off that block the light and I'll take off any yellow or dyeing leaves from the bottom too. Came into the tent a couple of days ago to water the plants and saw that the fan blade had disintegrated in it's cage, but it spewed out small bits of plastic all over the plants closest to them. About 5 weeks ago my other fan stopped working in the same place. Not enough lube I'm guessing. so I went and got that blade and it fit. So I didn't have to buy a new fan. 😃 I've got to get in here and vacuum that up before the resin starts flowing. Don't need small bits of plastic in my resin. 😝 See which fan blow up in the video. Oh yes, I also had to replace a automatic opening roof vent this week. It hardly opened a inch on a hot day. I bought one off Amazon, it was here in 3 days, and it works great. Ok. See ya next week. Be Cool! Chuck.
Likes
17
Share
@RakonGrow
Follow
**** HAARVEST ZOE **** Nice Strain , My little Zoe really made all the mistakes you could possibly make. No matter when I give light or want water or fertilizer. It grows and grows and grows, the main thing is that there is light. It was one of my free seeds from Zamnesia. So far all seeds have germinated. I store my seeds in a dark, airtight container at 6°C. Tastes kind of sweet after curing. Greenhouse Feeding is a really easy fertilizer to use. I used the BioEnhancer again and again. My little Zoe thanked me. The BioGrow was used as topdressing and is doing its job. The BioBloom also does its job at the right time. And that's really great and easy if you don't have an autoflower. Of course there is a corresponding product. But I was happy to get anything here at all. Legalization has wiped out the market. But for next time I have an appropriate soluble fertilizer for fast-flowering plants. It doesn't work for 8 weeks :)) I use a Sanlight Evo 3-60 1.5 with Bluetooth dimmer. There's nothing to complain about there. Set daily cycle via app. Helpful if the weather or environment is so bad that you have to regulate the light intensity. 33g after 5 days dry . 24.5 °C to 22°C with 50%-60% . curing in a vaccum box at 18°C . It looks like I'm drying too long. // It tastes a bit crunchy. Day 79: trim , slow vacuum box to cure 22°C and 61%rH . Day 76: videostuff: been drying for 4 days (res 640x480) ( optical zoom x200 - x250 ) Day 72: DLI usage total this Plant : 2236.6 DLI in 70 Days . wet trimmed, cut off, hung upside down. see you after 14 days Day 71: preparing for harvest . 24h long night session . DLI : 0 Day 70: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 800PPFD (03:30) - 800PPFD (16:30) - 200PPFD (18:00) OFF video and photo tryouts with the digimicro mobil x300 optical zoom , mostly freehand Day 69: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 1000PPFD (03:30) - 1000PPFD (14:30) - 200PPFD (18:00) OFF incredibly hot and rain. lost some terpene :)) Well, summer is coming, Day 68: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 600PPFD (00:30) - 800PPFD (03:30) - 800PPFD (14:30) - 600PPFD (17:30) - 200PPFD (18:00) OFF - Added 1L bottle of water It's hot, hot, hot, Zoe would like more water. changed daylight cycle so it match the weather problems. tent is open until my real night comes. 103 flowers (including popcorn) counted, due to an accident about 15 flowers are missing. Day 67: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 600PPFD (00:30) - 900PPFD (03:30) - 900PPFD (14:30) - 600PPFD (17:30) - 200PPFD (18:00) OFF - watering bottle water 1.75L weather to hot , changed daylight start time and daylight cycle so it match the weather problems. I'm lucky, buds are still growing :))) Day 66 (we are on the road with maximum sanlight ) - analyse some trichome . - make some Zoom Pics and Video stuff . - Sanlight DaylightCycle : - + ON 200PPFD (00:00) - 1000PPFD (00:30) - 1000PPFD (13:30) - 800PPFD (17:30) - 200PPFD (18:00) OFF - DLI will stress alot ... Anyway, it's too hot in my room... I open the tent and now everything is fine with the temperatures and I increase the Sanlight to 100% for the first time. May Zoe love it or leave it :)) We'll see what happens Day 65 : Sanlight DaylightCycle : ON 200PPFD (00:00) - 800PPFD (00:30) - 850PPFD (13:30) - 800PPFD (17:30) - 200PPFD (18:00) OFF It will soon be ready for harvest.
Likes
3
Share
È iniziata la 3 settimana.questa Kandahar della ministry of cannabis sta crescendo anche lei super bene ..sto ancora pensando se topparla o farla fiorire così....
Likes
Comments
Share
@BruWeed
Follow
Se encuentra perfecta. Los cocos cada vez estas con mas tricomas. Algunas chalas tienen color violeta. Su olor es fuerte y se siente dulce. Yo creo que en un mes ya estaria, voy a dejarla 3 semanas mas con fertilizantes y despues empiezo con el lavado de raíz. Es una planta muy linda, todo es perfecto y sin dudas volvere a cultivarla.
Likes
18
Share
@xtchill
Follow
Well the end has come to this beautiful strain What can I say it was fun to grow even considering the early problems I had with the yellowing it turned out amazing The smell and taste are out of this world. Tastes very citrucy and sweet. With a super heavy high. Looking forward to curing this one. Onto the next and big up the followers
Likes
16
Share
@Canadian
Follow
I did not now the weight of how much dry or wet flower I have because I decided to freeze right away all of the flower and after 24 hours in the fridge I created bubble hash unfortunately I only took pictures of the first batch total amount 58.6 grams of bubble hash of excellent quality despite treating this plant really badly it give me a very abundant flower With incredible density
Likes
6
Share
Slight green on top of soil cleared off now. Should i be watering the whole pot at this stage ??? Or just around the plant ?
Processing
Likes
16
Share
@Dunk_Junk
Follow
Well into flowering now. She is definitely a more indica phenotype 😭 I must have lucked out first time round with such a Sativa phenotype 😍 I'd love to know more on this side. The likely phenotypes, and how and why they come about. Also what is the likelyhood/prevalence of each of the phenotypes....... So many questions 😂 But anyway, she's looking absolutely fab. Flowers developing well so on she goes a few more weeks! 👌
Likes
1
Share
Happy with my plants 😊🙏
Likes
9
Share
IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
9
Share
Removed a few fan leaves.✂️🌿 Changed the nutrient solution. 🌊💉 Very happy with this strain so far. 😁👍
Likes
4
Share
@the_O
Follow
alarm!! something went wrong the leaves hang down a lot on the vroder plant. it hardly smells like grass but only like wet hay. the tubers look a little shriveled up in the front ones. I have the feeling that she is already overripe but can't really say because it's my first grow. I urgently need good advice