Week 9 day 1 video pheno. Gonna chop this week Week 9 day 7 well chop this weekend so on week 10 Day 1-2. Just waiting on a light to reveg one. Everything is magic

09.07 After 75 days of bloom and 5 days without water I harvested all of the plants, It's the end of the harvest window declared by the breeder and the trichomes look really nice. The one trichome picture with the lots of amber trichomes is of a headbud that got damaged a bit and started already to dry. The other Headbuds didn't had so much amber trichomes. Anyway, I am super happy with the outccome, I just cutted everything and hang it to dry without any trimming.

Welcome to the Zamnesia Spring Cup 🏆. Harvest day 68 Hey all together 🤗. Today there is a short update on the harvest before the last update comes with the finished harvest 😄. I can only say it again and again, the buds look beautiful, and it was very pleasant to cut in terms of the leaf / bud ratio 😍. After standing in the darkroom for 48 hours, it was finally harvested 😝. The buds were all sterile with Tool trimmed neatly by hand ✂️. Then they came back into the darkroom on the net, where they are now gently dried for the next 7-14 days at 62% humidity and 22 degrees temperature, before they are first put in jars with Boeveda pack 62%, which takes another 2 weeks is exchanged for Boveda 58%. But more about that in the last update, until then I wish you all a lot of fun with the update, stay healthy 🙏🏻 and let it grow ☘️🍀 You can buy this Strain and Nutrients at : www.Zamnesia.com Typ: Sour Diesel (Zamnesia) Zamnesia Spring Cup 🏆🏆🏆 Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Monster Bud Mix ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧

Sugar high came out very nice. Has a very gluey terp almost like super glue. For an f1 this genetic grows like a weed lol but seriously Sugar high by Mephisto genetics should be taken seriously!!!

One more week should do it. There are some amber trichs. But, not enough down the stem. And, I'd like just a little more bulk. Between the two, one more week won't hurt anything. As far as nutrients for the week, I've only been giving it about half dose of KoolBloom as a supplement to what is in the soil already. It worked well with this cultivar last time, too. The buds are about 1.5 inches wide. Or, 4cm to the rest of the world. I still don't get why the US won't change to metric!!

Esta semana le hize 1 riego con flawles finish de advanced y nada mas ahora solo agua hasta el corte muy feliz con estos resultados que temperatura y humedad me recomiendan para secar? Gracias a todos

El Xupet Negre von R-Kiem Seeds – Blütephase gestartet! Gesponsert von Growshop Dampf Mit Stil Der Strain El Xupet Negre von R-Kiem Seeds hat die Blütephase unter der Nanolux SN630 begonnen und zeigt bereits jetzt ein starkes Wachstum und erste Blütenansätze. Diese kraftvolle Hybrid-Genetik ist bekannt für ihre dichten, harzigen Buds und ihr intensives Aroma. Aktuelle Grow-Highlights: ✅ Gesunde, kräftige Pflanzenstruktur mit stabilen Seitenästen ✅ Explosives Strecken in der frühen Blütephase unter 12/12 ✅ Erste Harzentwicklung erkennbar – vielversprechender Start! ✅ Fruchtig-würzige Terpene kündigen ein intensives Aroma an Mit der richtigen Kombination aus effizientem Licht, hochwertigen Nährstoffen und optimalem Klima – alles erhältlich bei Dampf Mit Stil – verspricht dieser Grow eine ertragreiche und potente Ernte. Bleibt gespannt auf die weitere Entwicklung! Schaut bei Dampf Mit Stil vorbei und sichert euch alles für euren perfekten Grow!

È stata bella ed abbastanza semplice da pulire! Solo un paio di buds sono stati colpiti da un pochino di marciume... Aspettiamo che questi bei fiori di 💜SUPER SATIVA SEED CLUB 💜 si secchino al punto giusto 👏🏻 GRAZIE SSSD💜

420 Fastbuds FBT2302 Week 7 Weekly update for these two frosty ladies. Both are starting to get super frosty especially the one. Giving off a sweet smell now at the flower sites. Both are pretty identical in height,leaf structure, and smell so far. Really excited to see what will come in the weeks ahead. All in all Happy growing

Stiamo ancora raccogliendo,ancora nessuna pianta é morta,sto rimuovendo piano piano le cime più mature,così facendo evitiamo le cime popcorn e diamo il tempo alla pianta di riempire anche le cime inferiori,per adesso levando quella fumata e venduta siamo all'incirca sui 780g,però aspettiamo anche il nuovo stendino,alla fine del raccolto dovremmo arrivare a quasi 2 Kili con 7 piante e 6 vasi,con una media di 333g a pianta,ho pubblicato tutto quello che potevo,ogni procedimento,spero vi piaccia e mi seguiate

I will try to see what will happen :) the growing box is very small 40×40×120cm. the light is also weak :) niello -110w . interesting growth ahead :)

Has a sweet taste to it. Again , I didn’t log any larf in the weight. Very resistant strain.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Very satisfied,candy smelling buds.Thick colas,final week flush atm.Sweet seeds have some serious fire man thats for sure. Looking forward to harvesting this girl

..shes in a 3 gallon pot..Man what a beautiful plant.. She's taller than me lol..the only issue it the light. I dont think its strong enough to bring out her full potential. So i do have 2 clones outside still they're not tall lol. Maybe around 12 inches.. But genetics is 150% the best. .. Her nodes dont have buds they have branches. So behind every leaf is a branch. Those are going to stack up so dam crazy. How can i not love it. .. In ground she would reached the atmosphere lol.. IM STILL BANNED.. I C A N N O T COMMENT TO ANYONE... .. Growdiaries tech team is really a bunch of elementary kids... I would not tell people im a gd tech person because they are THE LAUGHING STOCK of internet.. Burger king has a better tech team.... Thanks again to my loyal friends an growers family.. I love all of you.. 🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆dev genetics. Keep up your goal of making ur own strand. You really rock my brother.. All my followers keep safe.. Have fun growing.. And highest respect to you all from me thank you.. Doctors choice great strand genetics.. I already removed over 7 main lower branches not to mention 10 " nodes/branches" is she was in ground in full sun i KNOW i could climb her. By far THE wildest structure of branches and nodes.. The 4 main colas should shack up to around 3 ft each .. I dont care if she take 10 months to fully finish she is a Frankenstein monster 💚💚💚💚💚💚💚💚💚🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆

I am starting this second mandarin becasue of the first one. It looks like not moving. Lucky 🍀 i got room.

D64 - We're at the start of the fifth week of flower, and the girls are looking better day by day. However, a few days I noticed very minor leaf damage on two leaves on the second girl that "might" be thrips damage. It's not a huge deal since the girls will finish in two to three weeks, but I figured it would be prudent to be proactive before the next grow, so I ordered some Cucumeris predatory mites. They arrived today, and I hung a sachet with mites on each girl. D68 - Today, I disconnected the Inkbird controller and humidifier that kept the humidity in the tent high. It is getting towards the end of flower, and I want to decrease the RH in the tent to avoid botrytis. I also set the exhaust fan to run constantly. I hope that will be enough as there isn't enough space in the tent to fit a dehumidifier. #tinytentproblems D69 - The humidity in the tent is still too high for my liking so I had to get creative. I drilled a hole in my dehumidifier so that it can hang in the tent. It's only a small dehumidifier and not very powerful but the tent is tiny and the dehumidifier should be enough to drop the RH by around 10%. D70 - We have reached the end of the fifth week of flower and the girls are rocking it in the tent and their buds are getting fatter as each day passes by. It's only a waiting game at this point although a game where I'm trying to avoid budrot. I adjusted the light schedule yesterday so that the hottest hours of the tent are during the coldest hours of the day. That should even out the temps a bit, and I also keep a flap open on the tent to further reduce the temperature and humidity. The girls are looking great and I would hate to get botrytis and lose part of the harvest.