Following The Grow Boss tips on YouTube "...yield is based on light, quality is based on growers talent" "...number one problem is, too much light, too much water, too many nutrients" Nutrients : (after having issues with nut burns, I decided to use Grow Boss's perfect ppm calculator) Invasion T (Glomus intraradices BEG72 and TRICHODERMA atrovide MUCL45632) 1g / plant Monster X mycorhizes (500 000 propaguls / Kg , made in vitro) 2g / 20cl then complete to make 1l Humic Fulvic Booster (humic and fulvic acids) 1ml / 1l Cannazym 2.5ml / 1l Rhizoponics 0.4ml/1l Lights: 2 x Adjust-A-Wings Avenger 600w HPS Lumatek 90000 Lumens 1000PAR 600w HPS Philips Son-t Green Power 95000 Lumens Soil:Platinium Royal Mix premium quality What is vapor pressure deficit? Often, marijuana growers who have their plants in indoor grow tents or rooms with artificial lighting, take into account parameters such as temperature and relative humidity to maximize plants growth and bloom, thus obtaining abundant harvest with top quality flowers. As we will see later, these factors affect different processes of the plant, such as transpiration or nutrient uptake. However, we usually forget about another important factor that is related to the aforementioned ones: vapor pressure deficit or VPD. Broadly speaking, VPD is the difference between the amount of water vapor that the atmosphere is able to retain (which depends on temperature) and the amount of water vapor contained in it (relative humidity). It is usually measured in kilopascals (kPa). Providing our plants with a correct relationship between temperature and relative moisture will keep us on the right VPD parameters, increasing the plant’s activity and thus improving its growth and showing its full potential during the flowering phase. The ideal would be to adjust both parameters (temperature and humidity) to get the best possible VPD value, so that the development of plants will be amazing.In the chart above you can see the right temperature and moisture values to maximize the development of cannabis plants. The green zone shows you optimal values of VPD, in which it would be ideal to maintain the environment. The orange zone shows correct values, in which plants should not have problems to develop normally. However, red areas show values in which your plants will be very far from hit their full potential, since the relation between temperature and moisture is not optimal. With relatively high values of VPD (between 5 and 12) plants tend to open their stomata and release a considerable amount of water vapor into the environment (increasing their transpiration). This increase in transpiration results in an increase in the plant’s photosynthetic activity, which will need more nutrients and will improve its overall growth, both during growth and bloom. The best range is between 7.5 and 10.5, which we have marked in green. However, we must be careful that VPD is not too high (dark red zone) since the plant would close its stomata to avoid releasing too much water vapor to the environment, which would result in fast dehydration due to excessive transpiration. On the other hand, if VPD is too low (light red zone), the plant will also close its stomata for not releasing more water into the atmosphere, which in this case would be already saturated (it would have reached the maximum water retention capacity in a specific temperature). In this way, reducing transpiration will also reduce photosynthesis, which has a direct impact on the plant’s development and yield. That way, VPD is essential when it comes to offer the best conditions for the development of plants, also to understand its water requirements according to the nutrients used and thus adjust them correctly to meet the grower’s expectations. N/B: SAY NO TO DRUGS -[Day 90] The plants are getting massive, not a lot of space left in the room, each pictures are token back against the wall or on top of a chair. The Super Skunk shall be ready first , the trichomes are visible without using a microscope, the scent is like an amazing candy floss coated with Skunk pee 😅Boerejongens quality @Home 😊 -[Day 93] Switching Buld Lumatek 90000 Lumens 1000PAR to SuperPlant Super Red 85000 Lumens 2000K 1498nm Lightening under the 1500nm wavelength (2000K) just between the NIR and the Microwave length, can't stand in the room too long without getting tears and shining eyes. Buds shall start to blowup like pineapples, increasing yield. -[Day 98] Everything is getting frosty. Starting to decrease RH . -[Day 103] Today the Y Griega started to push on her terpenes, believe it or not that plant smell stronger than the 6 giants Skunks (the Skunk strain is already a very strong smelling plant), she smell like a coffeeshop front door, the fragrance is absolutely amazing and fantastic, I will definitely grow a full crop of that strain ! -[Day 105] 42 days of Blooming folks ! It's getting serious now 😄 If it can helps you to realize, each plants gots 4 side and a middle, each sides gots 4-6 buds and there's 5-6 buds in the middle, there's 11 plants of 1,60m/5.25ft, how many buds does it makes ?? The correct answer will win 1 like 😅😂😅😂 -[Day 106] WEEK 7 of flowering, the end is close my friends, I'm trying to give you the best shots as possible, I wish I'd could share a good smoke from this crop with you guys ....😉 -[Day 113] WEEK 8 starting, every beginning has an end, this is where the Fall is gonna start. -[Day 115] LADY'S AND GENTLEMEN !!! In the Indica's category the winner is .... ruuuuummmmmbbbbbllllleeee ..... VANILLA KUSH !!!!!! I've seriously tough the Super Skunks will be ready first, but Vanilla Kush has shown milky tric's after 52 days of Blooming, waiting for some few ambers tric's before starting the Flush. -[Day 121] Hopefully for me I didn't trust in breeders flowering periods I would have f*ck up the crop ... Plants are fading slowly and naturally, I won't need to flush. Checking the trichomes every 4 days, the crop will probably need another 2-3 weeks. All plants are running on water now till the end. Buds are ripening, the smell has turn into a kind of roasted coffee beans with Skunk pee and cotton candy. -[Day 122] Milky tric's spotted on Blueberry after 59 days of blooming -[Day 123] 60 Days of blooming, gonna flush them all

What up Fam, weekly updates on these lovely ladies. This week it's been warm and such a bad time for my AC to go out but overall temps been in the mid it's inside the tent and the plants seem to not mind at all. They're still getting fed 16oz daily. I'd say from the looks, maybe 2-3 more weeks until harvest. Happy Growing

Well this girl is nearing the end, flush maybe next few days flush as too hit 70 cloudy 30 amber 🤞 🌱 absolute beauty of a autoflower her smell is unreal 💚 Her sister is still outside luckily I was quick too remove as I think she has a rooting bacteria issue due too rust spots, she will be left and I'll update as and when 💚

Sponsored by: ⚖️HUMBOLDT SEESDS⚖️-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 29/9 it was a tough month for me but I'm back in charge. We are almost at the end of the cycle and the flowers begin to be large and the pistils begin to color. __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Highly professional graphics and website, one-of-a-kind genetics, and a legendary story! Anonymous shipping! ✅https: //bit.ly/HumboldtSeedsCompany __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

Plants are flowering now and man are they gorgeous. Easily 24”x24” wise a nd 28” tall/26” tall. 1.1ppm as they enter flower they’ve taken everything I’ve thrown at em!

Day 28 veg: Hi all , I hope your gardens are green and your stash jars are full ?. With the 4 weeks passed and what looks like a possible flowering start to the ladies with a few white hairs on the bracts and within the tip growth. The odd burns on the leaf are not from a feeding error but from the mist over spray of my d.i.y fungus gnat killer. A steeped tobacco , washing up liquid and bicar of soda. It works on contact mainly but doesn't bother the top soil at all. The flies are crazy now from the coco use ( 1 drawback of it but worth it still). It is a little "hot" and has caused the yellowing burn. I have now got some store bought product that has donenthe job instantly and will hopefully hot the emerging young adults over the coming week. It is a powder with multi use called Agrothrin. works on many garden pests and problems insects. Six-shooter is still a lighter shade than her stable mates but just think this is genetic as they are all feeding well so far. she jas a sativa kind of look too her so far and with the inset of flowering starting , I think she could stretch into the space nicely. Strawberry Pie is also beginning to show signs of flower too. She had her 5th nodes tied up to help the lower 3 (node 1 removed with coty earlier)to develop to the same height I am hoping I timed it right with the autos. The 5th is now over at a 45 degree angle so should hopefully stay put a little longer as the others start their stretch period. She is a wider looking strain like the Mexican , ,so a nice mix this run The Mexican is doing well now and i released her 5th node too sonlets see how she reacts Onward to the flowering cycle next. be safe growmies

Start of week 3 - No nutrients. Might top this week. Day 18- Topped. Think I’ll wait until the new week till I post again.

2025-06-15 as i expected the Mimosa is skyrocketing, you can see every day a huge Progress, Pictures are 3 or 4 days old- and today shes already much taller and flowers are to see. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Mimosa Auto is a contemporary autoflower strain boasting potency and bud quality that rival photoperiod cannabis strains, with a staggering 21% THC content that delivers a remarkably strong high sure to bring a big smile to your face. Mimosa Auto is versatile, making it an excellent choice for various daytime activities. As for its flavor profile, as you might expect, it offers delightful citrus notes, featuring hints of orange, lime, and lemon, with a subtle touch of diesel. It's a flavor profile that's sure to satisfy even the most discerning cannabis connoisseurs! In indoor cultivation, Mimosa Auto reaches a manageable height of 60–150cm, while outdoor plants typically reach 80–160cm, making it suitable for tight spaces. Mimosa Auto doesn't keep you waiting: it yields its delectable harvest in just 10 weeks from germination, including 7–8 weeks of flowering. Indoors, you can expect up to 400g/m², and outdoors, it delivers up to 130g per plant. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Growing Environment Setup & Specifications Lighting System Model: Sanlight EVO 5-150 Quantity: Up to 5 units Power Output: 320W per unit Maximum Total Output: 1600W Environmental Control Management Unit: Growcontrol Growbase Pro Humidity Management: Dedicated Humidifier Dedicated Dehumidifier Temperature Control: Primary: System-controlled Secondary: Additional Radiator for supplemental heating Air Management Air Circulation: 2x Stand Fans Air Extraction: Exhaust Fan with Filter System Irrigation System Primary: Autopot XXL Pot System Water Storage: Flexi Tank Root Zone Aeration: Airdomes Dedicated Air Pump Growing Medium Type: TERRA PRETA MJ-Mix Nutrients System: BIOTABS Method: "Just Add Water" Strategy Type: Organic-based feeding

Day 78 Update: Start of week 12! Watered plant with almost a gallon of pH balanced water until runoff. 4 days left of flushing on Plant #2. Going to play it day by day till harvest, depending on how this week's plans unfold. Day 82 Update: Harvesting Plant #2 today. I will update the harvest part of the diary once I place these buds in jars. See you in a few days!

Esta semana la GG auto 1 se le ha doblado la punta por el viento que hizo

After a long way with lot of work the magical part begins now. In all of my previous runs, i just gave it 3 to 4 weeks of vegi (seeding time included) and i need to say thank you all guys for keeping me cool for let it grow longer! I'm so damn exited for the upcoming weeks...cheers!!!

Up up and ... one more week here We go ❤️🤘 so they are grooving hehehehe i'm focus on producing good amount of trichomes and tryin to bring some colors to them. i reduse nutrients and stabilized my condictions . i like this AC thing lol I brouth down my temps to77 day time and 65 nigth time, humidety is the one i'm having problens bringing it down but is not too bad any way is going up and down and arround 55% so is ok Peace out and stay happy and safe D

Hey Cannafam Happy Tuesday, This gal has had another good week due to continuation of the dry weather and is still thriving. Temps have been not as hot but stable and warm, Tuesday - Friday temps have been bang on 25c daytime and 15c nighttime with continuos Sun and things dipped a bit on the weekend and up until today at 23c daytime with a bit of cloud and 14c night, but shes still been nice and comfotable. Humidity has remained again in the 70s averaging 72% and daylight hours are at 15 hrs 30 minutes. Growth on this gal remains strong, shes grown upeards a little more this week but 90% energy is now in flowering. Shes been attacked a little bit by leaf miners on a few leaves but nothing to concerning and ive tried to squash any thing in the leaves between the tips of my fingers, if they get worse then il defoliate and shes got plenty armor in terms of mass. Ive not given any PK this week and shes just had water with the base fertiliser. Flower development has been really strong and allott of her buds are nearly joining up along her solid main column, nice long pistils with still just small hints of purple teasing from within the flowers with plent of frost forming. Overall shes lookin rock solid, strong and healthy ☺️ Thanks for stopping by and hope you have a nice chilled week ✌️💚

? Blueberry Muffin – Pheno A Week 5 | The Beginning of Automation Some weeks are about explosive growth. Others are about building the foundation for everything that comes next. This week was definitely the second. Blueberry Muffin Pheno A has officially entered that fascinating transition where vegetative growth begins to merge with the first signs of flowering. The structure is now well established, side branches are reaching confidently toward the canopy, and every day she looks a little less like a seedling and a little more like the productive plant she’s destined to become. One of the biggest milestones this week wasn’t something the plant did… It was something I changed. ⸻ 🤖 Welcome to the AutoPot System This week Pheno A officially moved onto the AutoPot irrigation system. For anyone unfamiliar with it, an AutoPot is a passive watering system that feeds plants from the bottom rather than from the top. Instead of watering every day, a reservoir supplies nutrient solution through tubing to an AquaValve located underneath each pot. The AquaValve is actually the clever part of the entire system. Rather than continuously flooding the tray, it works like a mechanical float valve. As the tray empties and the plant consumes the nutrient solution, the valve automatically opens and refills the tray to a precise level before closing again. No electricity. No timers. No programming. Just simple engineering allowing the plant to decide when it’s ready for another drink. The result is a much more consistent root environment while eliminating daily hand watering. ⸻ 🌱 Learning a New Way to Grow Whenever I introduce a new piece of equipment, I don’t simply install it and hope for the best. I observe. I adapt. I learn. Because the nutrient solution now remains inside a shared reservoir, I also adjusted the feeding program. Some additives that perform wonderfully during hand watering aren’t ideal when they remain sitting in a reservoir for several days. For that reason, Sugar Royal and Power Roots were removed from the reservoir while continuing to use the remaining Plagron nutrients that are perfectly suited for AutoPot cultivation. It’s a small adjustment… …but one that helps keep the nutrient solution cleaner and more stable throughout the week. ⸻ 🌿 Growth Update Blueberry Muffin has responded beautifully. Internode spacing remains tight, the branching continues to develop evenly, and the canopy is beginning to spread naturally without forcing the plant into shape. The side branches that only recently sat beneath the canopy are now confidently pushing upward, creating the framework that should support numerous flowering sites over the coming weeks. The bird’s-eye photographs really show how symmetrical she’s becoming, while the side profiles reveal just how quickly those secondary branches are catching up. It’s one of those moments where you stop looking at individual leaves and start seeing the architecture of the plant itself. ⸻ 🌡️ Environment The room continues running intentionally warm. Day temperatures reached around 31°C while relative humidity averaged approximately 72%. Normally those humidity numbers might raise eyebrows during flowering. However, this is still the very beginning of bloom, where maintaining higher humidity encourages vigorous growth, active transpiration and continued expansion before the flowers begin stacking seriously. As flowering progresses, humidity will gradually be reduced to create a safer environment for dense buds while maintaining an appropriate VPD. Everything is part of the plan. Nothing is accidental. ⸻ 🍽️ Feeding This week’s reservoir was prepared using: • Terra Grow – 1.8 ml/L • Terra Bloom – 1.9 ml/L • Pure Zym – 1 ml/L • Power Buds – 1 ml/L • pH adjusted to approximately 6.05 • EC around 1.83 mS/cm By keeping the solution simple and reservoir-friendly, the AutoPot system can do exactly what it’s designed to do—deliver a consistent nutrient profile every time the AquaValve opens. ⸻ 📸 This Week Behind the Lens The photographs this week tell the story perfectly. Bird’s-eye shots reveal a beautifully balanced canopy beginning to fill its space, while the side views highlight strong vertical development and excellent branch formation. One image captures the AquaValve itself—the tiny mechanical heart of the AutoPot system quietly doing its job. Another shows the reservoir that now feeds the plant automatically, reminding us that successful growing isn’t always about adding complexity. Sometimes it’s about making things simpler. ⸻ 🔍 Looking Ahead Next week should be incredibly exciting. With the AutoPot system now fully active and Blueberry Muffin comfortably settled into automated feeding, I expect vertical growth to accelerate as flowering becomes more established. The coming days should reveal the first real stretch, increased flower development, and an even more defined canopy. The real show is only just beginning. ⸻ 💚 Thank You A huge thank you to everyone following this adventure—from day one supporters to those who have only recently joined. Whether you’re here to learn, share ideas, ask questions, cheer the plants on, or even challenge my methods, every interaction helps make this diary a better place for growers around the world. Special thanks to: 💚 GrowDiaries for providing a platform where growers can document their journeys openly. Zamnesia for the incredible Blueberry Muffin genetics that continue to impress with their vigor and structure. 🌱 Plagron for supplying the nutrition and soil that keep these plants thriving. 💡 Future of Grow LED for delivering the light that drives every stage of development. And finally… Thank you for taking the time to follow along. Every comment, every question, every bit of encouragement—and yes, even every constructive criticism—helps this project grow alongside the plants themselves. Growers Love and see you next week, where I hope Blueberry Muffin begins to show us exactly why she’s earned her place in this 8×8 adventure. 🌱💚

Last leaf trim. Hopefully there's enough light getting to the lower bud sites now. Upped the bloom feed a little and turned on the secondary fan. Started to get a couple wet leaves where they were touching. I set up another tent too. 😬😬

I think i am on cruise Controll

Still trying to find the issue, I noticed that new growth mostly looked fine and the plants were growing quickly still after watering and leaf issues started popping up only after the soil had dried out quite a bit already. So was I underwatering? Was the EC in the soil rising after too much dryback? Still, the plants were quite light in color, but that did not seem like my biggest issue. I topped the GMO a few more times, because it had grown so tall. Finally I decided to put the Sour Strawberry seedling into the AutoPot as well.

Start of week 5, the smaller plants are taking forever to uptake the water I think that's really caused some stunting 🙁 anyways just gonna let them dry off and refill, see what happens. All of the big girls are looking nice and being fed daily. Clones have started showing some beautiful roots and I can't wait to run a full batch of clones in here. Yeah so it's 9/21 last night I checked all of the clones and 100% have fat white roots popping out the bottom of the Root riot cube so I guess it worked, I filled some one gal pots today and got them all transplanted. 9/24 all clones are looking good, LSD is thriving in the flower room, smells amazing and sticky as can be, seems like stretching is over.

Week 6

Excited for next attempt. Learned a lot this time. Thank you all on here who helped!!!!!!!!!