Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
35
Share
@daggaDNA
Follow
Last day of the 3rd week and first day of 4th week. Plants bounced back completely from my 10 days absence, and they're praying as always when approaching correctly with Aptus nutrients. In order to prepare them for late flowering, I fed them in previous week with added Fulvic Blast. The very next feeding I gave them beneficial bacteria again with Micromix Drip, before they start receiving the highest ammount of phosphorus. Now I stop with adding any additional nitrogen (Startbooster) as they stopped stretching and they will focus their energy into flowers, so I'm implementing the Topbooster which helps our plants with sugars and brix level. Are you aware of brix and what does it means for your plants health and taste in the end product? If not, start reading and discovering, thank me later 🙏
Likes
19
Share
@Changman
Follow
The ladies are packing on beautifully and we are now giving them extra strength light during 12:00 till 14:00 slot 100% and lowering the light back down to 75% from 14:00 till 17:00 and then 50% light from 17:00 till 23:00. Lets see what happens
Likes
12
Share
She’s doing well short but looking good. I’m just hoping she starts to take off a bit more.
Likes
7
Share
@MrSpunk
Follow
This week we start with some LST... The second Runtz didn't make it, so I've thrown it away now.
Likes
2
Share
She been cleaned and looking good so far time to start pumping those nuggies
Likes
1
Share
Veo algunos pistilos así que lo tomo como pre floración.... No es la primera vez que las autos me quedan pequeñas ..... Pero confío que será un buen resultado....
Likes
2
Share
Likes
15
Share
@Dr81n
Follow
Last 2 autos coming up maybe week or 2 before done. Expecting the large Durban og auto to foxtail some as it keeps adding white pistols. Smaller plant lost track of strain as I didn’t much care but for a little gal she is pungent.
Likes
11
Share
@ElGrowLab
Follow
The End is near. Can’t wait to harvest and dry them. Next 2 Weeks I use to flush them. I think then they’re ready. I’m very proud of the purple BigBud. She’s purely looking incredible. What do you think ?
Likes
2
Share
@Alepower
Follow
Iniziato lavaggio con osmosi da 3 giorni, trascorsi altri 7 taglieremo tutto.
Likes
42
Share
Harvest time I decide two hang the entire plant for a slow drying !! I finally removed the plant to much humidity it was around 80%😥 it’s raining hard those days anyway I checked every buds and no mold so I switched to my old method . 📦 humidity now it’s 55% 👌 5 days of drying I try to keep humidity around 60 and 17 degrees to keep all terpenes n flavour, terpene don’t like low humidity ,heat ,and of course lightning ,see y’a next update 💪💪💪 I had 34g of nice frosty trim ,for the first time I’ve made some nice bubble hash amazing I love it!!! I watch all of he’s videos he was the marster of hash RIP French cannoli 🙏🙏🙏
Likes
34
Share
На этой недели решил чутка перейти к крайним мерам, пришлось удалить короткие и кучнистые ветви на которые попадало чень мало света, посмотрим как пересёт такой стресс, всё идёт замечательно)
Likes
Comments
Share
@Urunascar
Follow
Terminando el stretching, se van llenando los espacios donde faltaban flores, espero que la circulación de aire sea suficiente, estoy regando de 2 a 3 veces al día dependiendo de que tanto estoy en casa para atenderlas, siempre riego hasta un 20% de escorrentía como mínimo (20% de la entrada). Un día me saltee el riego de la tarde y llegue a un dryback del 50% (generativo) no les gustó nada a las plantas y me mostraron signos de exceso de salinidad enseguida, ya volvieron a la normalidad y para el final de esta semana baje la EC de entrada a 1600EC
Likes
6
Share
@Hoolyhead
Follow
In around 8 weeks just doin her own thing nd doin it wel so far hairy head on her started so see how long she takes from now hoping to see colours starting to show soon