The plants seem to develop quite well so far. Nice big leaves

Apart from struggling to maintain an optimal VPD, it’s smooth sailing right now. The buds are swelling up nicely. According to the breeder, we still have at least four weeks of flowering to go before harvest.

Day 43 veg been doing LST and super cropping but dunno if i should top all the bud sites please could someone give me some advice on that as I have never grown clones before Day 45 looking a bit better after super cropping and fimming all bud sites

This week were just on vegetation cruise control.. making sure the Bosh is topped up for there feeds n checking and adjusting ph n ppm's.. the canopy is filling in nicely now n the training seems to be working!

Tester 2313 is doing very well, we've started the mainlining and topped twice this week! I'll most likely keep her at 4 colas for the remainder of this grow. Really excited to see this project out! Below are days of activity for this plant: Day 20 Topped to third node, removed veg below third node started mainline Day 21 1 gal distilled water 1/4 tsp sensizym 1/2 tsp Cal-mag 4g veg ppm 461 Hope everyone has a great weekend!

Tropicana Cookies Fastflowering by Fast Buds Genetics

Top-shelf buds. Beautiful dark purple bud that smells of fresh citrus. G‍rower: 'Highigan' (from Instagram & YouTube)

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Hi everyone. By now a fat banana has come to an end. With next week I will proceed to the cut. Now it is being fed only on water (ph 6.2) The other little fat banana was infected with a caterpillar that was eating the stem internally. I eliminated the parasite and treated the wound of the plant with a totally natural product. It seems to me that he reacted well. The northern light proceeds ... it is still behind.

14 day dry | Curing in Grove bags, filled 7 QP bags & got 56g of keif out the trim bin from only 2 plants! More pictures coming! STAY FROSTY GROWMIES

Day 1 down...will connect the blumats tonite 😁. Blackberry moonrock and girl scout cookie were damaged during transplant but look good and bounced back nicely. Was waiting for them to recover to flip. Light compost tea bubblin since 8 pm yesterday to help start the process. In the next day or 2 ill get the last trim and take the last few clones. At the end of week 2 ill quit sprayin labs and em5. Grow cam still sux but its all i got at the moment so ill have to make due with it and my cell.

The Grapey Walker Kush shot up in week three like crazy. I mean, already looking like bushes. The Super Orange Haze is normal size.

Hey now, was a pretty good week for the Sour D, I didn't really make any changes as far as the nutes, still at EC of 1.6, with water from my dehumidifier, then cal mag, then maxi bloom powder, then liquid kool bloom. Only real issue I had this week was on day 58 I noticed her leaning a little bit, and I went to move her pot, and she almost toppled over. It really scared the crap out of me, so that is why you now see all the wire tires wrapped around her base. Definitely something I will be more mindful of in the future. Still dealing with high temps and humidity, but my dehumidifier has been a real Beast. I will also add that when I open that tent, the smell of Diesel Fuel, and Lemons smack me in the face like a 2x4. I have never smelled anything that pungent before. I am amazed at how well my Terra bloom carbon filter is doing, although I am sure it helps I have an 8x24" inch filter and Infinity T8 exhaust running on the lowest possible setting in my tiny little tent. Really hoping for some thick and sticky flowers! Thanks for checking me out and and Blaze On....

This is a purple haze clone I received on 3/23. She has been topped and trained in prep 4 scrog!! She received her first @gaiagreenorganics all purpose 4-4-4 feeding on 4/23. Also installed scrog on 4/23. She received her second dose of 4-4-4 on 5/23. Installed Marshydro tsw2000 on 5/31. She received a 15 tablespoon dose of Gaia green worm castings on 6/2. 6/30 gave her a mix of Gaia green all purpose and power bloom. 6/30 switched light to 12/12 cycle. 7/30 gave a full dose of power bloom. This is what she looks like today! 💡 Grow Sponsor💡 @marshydroled__amazon @marshydronnier #marshydro #TSW2000 #rvagrown ,#rvagrower , #cannabisgrower , #homegrown , #hightimes , #weed4ptsd , #weed4veterans , #veterangrown , #tricomes , #ledgrown , #weedstrains , #indoorgrow , #indoorgrown , #tentgrown , #supportlocal , #growlocal , #letsgrowrva , #weedismedicine , #420 , #veterangrower , #purplehaze , #sativa , #sativastrain

🍼Greenhouse Feeding BioGrow & Bio Bloom 🌱GARDEN OF GREEN SEEDS ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)

No reservoir change this week in the end, just top ups and nutrient top ups - If I stop being lazy, I might do a complete change out tomorrow (D85). They're getting really frosty now. Can't wait to make some leafy THC snow in a few weeks time after I install my 24w UV-B tube above the canopy. Starting to pack on some lateral buds as well, pretty much mirroring last grow in terms of growth so far, without hacked off tops this time :) Can't really do anything about the wind burn, just got to accept it, otherwise the fan is on too low and doesn't move air properly. Solid argument against excessive leaf removal here: https://www.cocoforcannabis.com/community/photons_corner/to-defoliate-or-not-to-defoliate/ --UPDATE D89-- After the reservoir change on D85, I upped the pure blend tea to 10ml/US gallon, by god she's exploded. I think as a whole, the bud mass is almost on par with my last grow when it was chopped and there is still another 40-45 days left in her... Fingers crossed I don't fuck this one up 🤐 Thanks for stopping by!

This week has been easy just like any other, how ever i did get one broken branch i did try to fix it but i don't think it will make it

week two flower everything looks healthy :D today i defoliated them i watered them with 1.5l every 48h the light i use was set to 80% and it hangs 80cm away from the tops