Flowering day 42 since time change to 12/12 h. Hey everyone 😀. Both phenotypes continue to develop very nicely :-). The buds are getting bigger and bigger and the sweet smell starts to waft through the tent 😍. It's very much in the Skunk direction 👍. It was watered twice this week with 1.2 l per watering per plant. The tent was cleaned and everything checked for health 👍. We'll see you again next week :-) Until then, I wish you and your families a Merry Christmas 👍😀🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

She shot up this week!!!!! Grew 15cm/6"! Day 42 - I took off about 6 huge fan leaves to give lower levels of the plant some more light. This is her last week on 20/4 lighting. 12/12 from now on.

Things are really looking up this week! This girls are growing FAST! And my problems are seemingly balancing out. What I did to remedy last weeks issue was let them dry out 3 days, then watered with 6.0 ph dechlorinated water. 2 days after I amended with 4-4-4, 2-8-4, and a bit of mycorhize and have been using 6.0 ph water to bring my soil ph down from almost 7. Today on day 28 I saw first flowering on 2 of the 3 girls 😇 So I have turned my lights up to 100% and pulled them back a few inches so the girls can adjust to the light. I'm stoked with Fastbuds and eager to get to harvest! Thanks for dropping by and God bless.

📆 Semana 10 Fase final en marcha, con cogollos ya formados, muy duros y ganando el último peso. La resina sigue aumentando y los tricomas, mayoritariamente lechosos, empiezan a mostrar más ámbar, señal de que se acerca su punto óptimo. La planta aún mantiene algo de absorción, aunque más lenta, enfocándose en rematar calidad, densidad y perfil aromático, que sigue intensificándose. Cultivo estable y bien afinado, entrando en las últimas dos semanas. Seguimos creciendo fuerte 💪!

Just Fun 4*19L *7L 3*4L pots in 70/70 All 8 plants Hasse. Co2 5L, Biobizz, Coco Rhiza, Plagron bat guano. Preparing my baby to Fly Over World Upgraded everyday. Enjoy it😎

Die Umstellung auf 12/12 ist passiert, jetzt beginnt der Stretch und dann die Blüte. Die nächsten zwei Wochen wird nichts geschnitten, nur die höchsten Tops werden auf eine höhe gebracht. Ich bin sehr zufrieden mit dem aktuellen Stand! :)

Day 35 of flower

Welcome to the Zamnesia Spring Cup 🏆 Hi everyone 🤗 She continued to grow beautifully this week. The new shoots become very thick and strong 👍. Her colors are perfect 😍 and she does exactly what she should 😅. I will definitely give her another week of growth 😄. Otherwise everything runs great👍 I wish you a nice week, stay healthy 🙏🏻 and let it grow 🌱 You can buy this Strain at : www.Zamnesia.com Zamnesia Spring Cup 🏆🏆🏆 Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Monster Bud Mix ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧

Well, the photo period plants are looking great now. The Seedsman Cream & Cheese CBD came back from looking pretty small and lanky, to starting to look like a nice fat bush. I'll be topping and cutting clones in another week or two. I plan on getting the 2nd of 3 tents set up this weekend.👍

Swell

I’m back!! And sorry I’m using my videos I posted on YouTube..😞😞 I will make sure not to in my posts to come!! Popped seeds Jun 27 Temps inside some at 80 degrees F Humidity is at 75-80% 8 seeds planted and all 8 made it!

Week 18 (30-6 tm 5-7) 30-6 Temperatuur: 31.4 graden (licht aan) 22.5 graden (licht uit) Luchtvochtigheid: 69% (hoogste) 50% (laagste) Ik heb de trichomen bekeken en heb besloten haar nog een dagje langer laten staan. Watergift: Geen. 1-7 Vandaag heb ik de trichomen opnieuw bekeken en die zien er goed uit! Veel cloudy en best wel wat amber. Ik hou echt van deze trichome foto's, echt mind blowing hoe dat er uit ziet! Dus vandaag gaat de schaar er in! 2-7 Ik heb besloten om een wet trim te doen zodat als ze droog is ze gelijk in de cure pot kan. Geloof het of niet, maar ik ben wel 12 uur lang bezig geweest om alles te knippen 😅 Op 1-7 ben ik in de middag begonnen en in de vroege ochtend van 2-7 was ik klaar. Het natte gewicht van de buds is 283 gram, en het natte gewicht van de trim is 61 gram. Ik ben nu al super tevreden met het gewicht! Dit is meer dan het dubbele aan gewicht vergeleken met mijn eerste grow. De buds zien er ook echt mooi uit. Ik schat dat het tussen de 50 en 75 gram droog gaat zijn. Ik ben benieuwd, nu een paar dagen drogen! Droogtent: Temperatuur: 23.4 graden (hoogste) 21.2 graden (laagste) Luchtvochtigheid: 59% (hoogste) 42% (laagste) 3-7 Droogtent: Temperatuur: 23.2 graden (hoogste) 21.5 graden (laagste) Luchtvochtigheid: 50% (hoogste) 41% (laagste) 4-7 Droogtent: Temperatuur: 23.1 graden (hoogste) 22.1 graden (laagste) Luchtvochtigheid: 53% (hoogste) 46% (laagste) 5-7 Na 3 dagen is ze droog genoeg om te curen. Wel heb ik iets te lang gewacht want de LV in de jar geeft nu 57% aan. Ik hoop dat dit over een dag wat om hoog gaat. Nu een paar weken curen en dan kom ik met de rook verslag 😁 Ik zal binnenkort ook even berekenen wat de gram per watt is, aangezien ik de lamp niet de gehele grow op 100% had staan. Het droge gewicht van de buds is precies 75 gram, en het droge gewicht van de trim is 19 gram. Samen maakt dat 94 gram! (De trim gebruik ik om een CBD cake of bubble hasj te maken) Ik wil iedereen bedanken voor het volgen van dit avontuur! Tot de volgende keer!

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 22 since time change to 12/12 h Hey guys :-) The stretch is in full swing and it continues to develop beautifully :-). The GBL fertilizer does exactly the job it should 👍. Organic more PK will be added in the coming days. It was poured 3 times this week (for nutrients, see table above). The lowest shoots have been removed so that the energy reaches the upper area completely :-). Otherwise, as always, the lady was checked for her health and the tent was cleaned. I wish you all a lot of fun with the update this week. Stay healthy 🙏🏻 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 .

🤤🤤 Blackberry 🍇 Auto Seeds66

Welcome to week 9 / flowering week 3 🌱 I had a little incident with the blumat system and accidentally flooded the tent. Nothing to worry about, everything is fine 😅🌱 The girls are growing well, PPFD levels are good and we’re on the road to mid flower. They keep getting bushy again, so I might defoliate them a little more in the next days. Also the blumat system needs more adjustment. Happy growing friends 🧙‍♂️

Olá amigos! Mais uma nova Semana, a minha árvore começou a florir 🙌💪 🤩 e continua a crescer está com 2,20m e 2,50m de diâmetro 🤩, esta semana fez 40 graus c, fez muito calor, folhas velhas ficaram amarelas e caíram.. fiz uma limpeza de folhas amarelas por dentro da planta e por baixo mas tudo parece estar bem com a planta, está semana adicionei a rega mais uma vez com BactoHemp 3ml e 1ml de bactobloom para activar a floração, fiz prevenção de pragas com insecticidas bio, fiz mais uns tutores para suportar o peso da planta para não se partir nenhuns ramos, acho que estou a preparar a minha árvore para uma boa floração 💪💪✌️🌲🌳

Day 42 The plants are showing steady growth and good health. The structure is filling out nicely, with strong branches and vibrant green leaves. Stretching has started, indicating the transition into the early flowering stage. The canopy is even and well-balanced, and new shoots are developing quickly. I’ll continue monitoring light height and nutrient levels to support smooth growth as flowering progresses. So far, everything looks on track for a healthy bloom phase ahead.

So, it's the end of Week 4 of Flower, and the ladies are doing really great. Only issue I'm encountering at the moment is with the Carbon Filter which doesn't seem to be exhausting as much air as I'd like it to. I have attached a video which explains everything. Happy Growing guys

Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎