So Flowering has started, I defoliated a bit and started giving some Bloom and flower...the humidity is starting to stress me out because its super humid outside and getting some crazy RH (70/80%) I need to fix this before it becomes an issue. So I moved my clip on fan to the bottom to see if I could move the canopy a bit better. it lacks power though.

💪🌿

There’s a big variety of budshapes on the Q1 which I really like the dos si dos buds all have the same shape and look big and stacking Unfortunately one of my mates spotted a banana on the Q1 maybe caused by calmag deficiency so on Monday to Tuesday night I decided to harvest her . Trichomes were most milky and with an expected blooming time from 5-6 weeks harvesting her starting of week 5 hurts a little but should be fine . Dos si dos now solo in the tent with no bananas or seeds spotted yet

Buds putting on weight

Wasn’t sure on keeping this but I’ve talked myself into keeping it

17-4-2021 ON FIRE : Wow what a good growt last week was crazy and what a big ass leafs! holy shit.. i think im gonna push the nutrions up 2 650PPM instead of the 550PPM now.. also still not in flower so that is good ! i only use the fish mix and still not biogrow i will do that the second week of flower, its very uniform so thats also great to see... i think im going to do some leaf stripping tommorow because thats needit ...i will do it strategic to minimalize the stress

The smell is pretty pungent and skunky. With a citrus smell if you squeeze the stem. Started the flush this week pretty excited for the harvesting. I'm at the 9th week of flowering. And I think 10 should be enough. I wanna thank @TheBudWhisperer for helping me with all my questions

Weather was better than before. A couple of sunny and warmer days. Installed the lights with the timer in order to support a 16/8 light cycle with a 1 minute burst of light every two hours at night. Mid week i transplanted them, super happy about that. Cover crop looks great. The placeholder pots have been filled with horsetail, alfalfa, bokashi and worms. Cleared them out to use it as mulch on top. Watered them in with fresh brewed vermicompost tea. The Jamaican Dream CBD will later move into the garden, so the roots can connect with the soil through the bottom of the bag. Plants looking great by the end of week, but still in flower.... started a new run for back up and a friend of mine would give me some very nice seedlings and clones if things go wrong.

What can i say. She is a stonker. Smells amazing looks mental. Fastbuds smashed this one again. I am excited about this one. I havent seen anyone grow this before.

Hello everyone, The 3 gorilla x white widow plants are doing great 2 plants need transplantation ASAP. I did a good defoliation and removed the internodes, next week the remaining 2 will sit in a bigger pot. Thanks for stopping by and have a nice day. Best regards, Growfather

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Tropicana Cookies by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for the outstanding, award winning strain from my friends at FastBuds... Tropicana Cookies Auto: I'll be running Tropicana Cookies Autoflower which is a 60/40 Indica/Sativa Hybrid. "Tropicana Cookies Auto is the perfect variety for growers of all levels, especially beginners as this strain performs very well outdoors and indoors, and can produce up to 500 gr/m2 in 56-63 days without needing extra maintenance. Reaching up to 110 cm, this strain grows fairly tall with medium-sized branching, showing its mixed heritage. Definitely the right choice for those with a high tolerance looking to get their hands on the strongest autoflowers out there. You can expect an extremely powerful and long-lasting high that’ll boost your mood and give you that extra push you need to start your days on the right foot. This variety offers the whole range of citrus and woody flavors with a strong candy-sweet background that will keep you coming back for more and more."* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/1- Setting up the AirCube system when off without a hitch, with very easy to understand directions. I did have one issue, the Drain Petcock on the 25g reservoir was broken during shipping. After a phone call to GrowAce, they had a replacement one on its way to me which I received in just a couple of days! I did however make one addition to the system. I placed a pair of air-stones, one in the Reservoir and the other in the Distribution Bucket to really oxygenate the water. I started all my seeds by first soaking them in tap water for 12 hours, then transferred them into pre-moistened (6.3ph) peat pellets. I placed the pellets in half Solo cups in the tent with 24hrs of light under which they sprouted within 48 hours. I kept the tent temperatures between 80-84℉, the RH at 65-70% and made sure that the pellets stayed moist, not wet. 10/3- All of the Tropicana Cookies are looking healthy and have good color and vigor! I'll be moving them into their fabric pots which have already been pre-moistened in the next day or two, or as soon as I see roots emerging from the pellet. 10/5- Today I moved all three Tropicana Cookies into the fabric pots, adding some Xtreme Gardening's Mykos into each hole before placing the peat pellets. I have the HLG 650R set to 15% and hung 30" from the seedlings. Tent temperatures are 80-84℉ with RH running 65-70%. 10/7- Well there's the first week on the books for these three little ladies and they're looking fantastic. I'll be giving them their first feed this coming week and they should start to really take off... stay tuned! 😎👍❤️ 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

Gros LST en vue pour cette dame, dernier semaine de grow.

Week 8 started 5/22/2022 Ending week 7 strong. Last day was 5/21 -- I added some organic dry food *** from the local, PH'd water to 6.2 with some added Cal Mag Pro. Just going on instinct here, added some epsom salt on top and will water that in later. Water in the tray feeder thing (Auto Pot XL in manual mode) is 6.3 ish. Centered into the lights and measured with the LUX meter. As she starts vegging into the lights its gets stronger and stronger, from about 600 to about 1200+ (just a little less than full sun outside in my locale-- I measured). I am not sure exactly what this measurement means, I only use the sun as a reference. I have both lights on full blast. Still deciding if I can handle the heat of adding the 150W HPS, its HOT HOT HOT, but it makes the flowers huge. I am stopping the LST into week 8, nothing but clean water for a while into the veg, don't want to over feed. I am just doing regular maintenance, watching the grow, and I keep using Crop Control as a preventative measure, I don't care if I am wasting it-- not to be weird but it just smells like it will work LOL. Still tweaking air flow. Height at 9" is the table, there are some tips that are at 12".(I re-measured and changed this to more accurate #s) She has to grow to at least two feet up. I need to measure everything and may have to reposition my filter to accommodate the height. We'll see. I am cleaning up the grow area now, nothing left to do except clean and water. Auto Pot guys said my stuff is missing little rubber grommets from the factory, maybe I can fix the damn things and they will have auto water and we will see if that affects grow speed into flower. I am scared I am going to outgrow my tent this time. I wish I had an A/C Infinity 4x4, those look sick. Next day follow up: Measured: I have just enough room to pull this off. I will re-position filters and lights before switch to flower. I will have two charcoal filters and one A/C Infinity fan, with just the single Auto Pot XL, and it will be functioning since I found the parts to fix. I may get some custom aqua-ponics - bubble-ponics thing going in the tray I placed it in, I think with more oxygenated water and a higher level, more cooling and I may actually get more growth/flower -- we'll see, I am always scheming and I have parts! Still thinking it through as pre-flower time approaches soon. week 8 day 3 - minor surgery, f'd up a cola branch by super-cropping the shit out of it. Fixed, but lost time on that cola, added side light on that side to help fill in, just when I should be getting ready for pre-flower! oh well, that is part of the mainline manifold game. Gotta have grafting tape on hand and assess before it gets to be an unsolvable issue. check your plants and pay attention to what they say to you. ***Dry fert. stats: EB Stone vegetable fertilizer blended with humic acid and beneficial soil microbes including mycorrhizae. NPK: 4-5-3 Derived from: Blood Meal, Feather Meal, Bone Meal, Dried Chicken Manure, Bat Guano, Alfalfa Meal, Kelp Meal, and Potassium Sulfate.

SOOO GANG UPDATE!!!!!!!!!!! I have put the Strawberry Pie Auto, Zkittles Auto, and the Gelato Auto On the chopping block, will update those within the next day or so, The Mimosa X Orange Sherbert is on the left (see photo) and the GMP on the Right!!!! They are starting to beginning the calix's and white hairs are forming lets GOOO!!!!!!

This is what's left in the tent, the gelato is comin down tonight and maybe the 2 smaller lemon aks maybe tmm. The cream cookies and other lemon AK will come down soon too and then I can get some pics. The pineapple and blue dream get 1 more flush

Unfortunately my new landlord does not allow growing and I was given the option to move or cut the plant down Moving is not an option unless I break my lease and that will run a few thousand to do I was two weeks into flower it is upsetting but I was able to grab some clones and passed them off to a buddy until I move I’ll be back sorry guys I added a video of the plant a day before it was cut down

They're behind the Jack Herer but at least the ladies showed up to the party at least! I have named them Shasta and Sky. They both have made the journey towards the light. I am maintainin a 21-23 C with around 67-75% RH, and with all 3 beans now popped, I am very excited about this grow day 5 of germination. Temp: 21.5c RH 75%. The sunset sherbert autos x2 (total 3) are also freshly emerged, and for now the SF-1000401h Evo 100W will be powering the babiesd, swapped out for the Mars Hydro FC-E1500 150W (+complete adlite set). later on this afternoon. Spider Farmer's 6L humidifier with sensor is doing a great job, and so is the dehumidifier , both are operating fine in the 70x70x1,60 tent. Air flow at 25% on a 4" inline fan with 204CFM. Light at 30% at 18 inches. No Adlites in operation. Let's quickly review the key new components I've planned to integrate or have already: Circulation Pump - Adding this to the 14L Mars Hydro reservoir will ensure even fresh, circulated-for-a-miniute-every-hour, batch of water (and later nutes) to the auto-drip system, maintaining optimal feeding for my plants when I am away, next week. Biobizz & BioTabs Supplements - These organic nutrient and microbial products will provide a comprehensive and balanced feeding regimen for my plants. Auto-Drain Potted Plant Stands - The wheeled, auto-draining stands will simplify watering and prevent any spills or overflows. Inkbird Humidity Controller - Pairing this with the Spider Farmer humidifier and dehumidifier will allow me to precisely maintain the ideal VPD (Vapor Pressure Deficit) levels. LST Clips, Trellis Net & Shelves - These will help me maximize my grow space and optimize the plant canopy for optimal light exposure. Pest Control Strips - An important preventative measure to stay ahead of any potential pest issues. Smart Soil Sensors - The Zigbee-enabled sensors will provide vital data on soil moisture, temperature, and more, which I can monitor remotely. Air Purifier/Ion Generator - Ensuring my grow environment has clean, high-quality air circulation. With all of these elements in place, combined with my existing setup and the automated control via the iGrow app, I'm truly creating a "hands-off" grow operation. (theoretically, with a bro, coming to phiscally check too)....The ability to monitor and adjust key parameters remotely while I'm away in Italy. Running on Sunrise/set mode(18/6) over the "seedling" scene, in iGrow app, keeping track of DLI and later on, the Adlites will come into play. Temp at 23.5 and RH is at 60%