Likes
Comments
Share
@Microsun
Follow
Alright, the time is here, I’ve started the harvest but I don’t want to press the harvest button until I have all my info correct, but I’ll show some photos from my baby, we started a slow 6.0 flush about 2 weeks ago and finishing flush about 4 days ago. She was already fading but I had some problems since I fed her without thinking after having some drinks witch is obviously a very rookie move. But as I’m still learning it’s just another oof under the bridge, she was fading and I got some nice looking tricombs and I’m happy with the smell and size for her life cycle, I’m aiming for a slow dry and cure but my space is limited in my appointment and grow room so I have a drying tent set up but conditions could be hard to handle since the season change. Cheers. (And yes I didn’t wanna flush my auto but I figured it was the safest route.)
Likes
8
Share
@Skunkstar
Follow
Suffered a lot due to heat stress flipped light down to 350W as tent was running at 95f pots had also dried back to much and this seemed to really effect onset of pistil growth also ive started with expload today also taken ec higher after waiting a little at 1/4 strengh nutes until they bounced back watering is now at 48 hour intervals also all popcorn bud sites are being pinched off each watering also still having a 20% run off and discarding that .
Likes
9
Share
@russrahl
Follow
60 days into flowering now, pulled 2 of these girls 7 days ago because 1 had a few bananas on it and the other was stressed to much from light and not really giving any quality bud and it was stretched out taking up lots of space. The 2 left have been flushing a little over a week now and are very close to harvest. I will prob harvest them sometime this week. Everything is going good so far anyway for these 2 and we will hopefully get some nice dense buds, we will see. Cheers💨 Day-62 update Found my microscope! Got some picks up of the tricombs up now, and as I suspected they are not quite ready yet. There are a few amber but I’m still seeing clear ones, but there mostly all cloudy now so I’m thinking another week or so will probably do it. That will give me a good 2 week flush as well. I got some pics and a video up as well just before my lights came on so there better then under the HPS anyway. Lol cheers💨
Likes
14
Share
@MG2009
Follow
03/25/2021 Day#1 more pics later. More lite bending for shaping, looks good gave 2 liters of banana peel tea supposed to be good pk boost throughout flowering period till 2 weeks before harvest so we will see how it works I will be given her tea once a week till week 6 then plain water till chop!
Likes
29
Share
Likes
9
Share
@Chupadeos
Follow
Todas están finalizando su floración aunque llevan días de diferencia finalizando la floración,los olores son tremendamente intensos y potentes,hay dos fenotipos de sweet skunk y dos fenotipos de killer kush ,gorilla Girl parece ser la más estable,aunque haya distintos fenotipos (2) los olores son similares pronto llegará la cosecha ,deseando que llegue dulces humos familia!!😍💓🇪🇦
Processing
Likes
29
Share
Likes
5
Share
Week 3 and starting to train these lovely ladies
Likes
4
Share
Full. Buenos Humos 🌱 ☀️ 🌳
Processing
Likes
7
Share
@Kushizlez
Follow
Day 10F-17F (Day 10F) Everything is looking on point. I’m going to soak in a gallon of lite compost tea diluted to 400ppms on each plant except for #5. I’m still a little worried I won’t make it through the stretch but at the same time I fear N toxicity just as much. I will give one more lite tea before the end of stretch, most likely at the end of this week. (Day 12F) Ladies responded nicely to the tea except for BBB#1. It just isn’t looking as vigorous as it was last week. It’s the only one without an air hose so I guess it couldn’t hurt to grab one. The air hose does without a doubt prevent overwatering in soil and I’m surprised I don’t see more people using it. It’s cheap, effective and gives me similar results to growing in pure coco. I’m going to give one more light foliar spray of 3ml of calmag, 3ml of kelp and 2.5ml of insect frass. (Day 14) Got the air hose hooked up to all 5 plants now. I hate that I’ve been forced to defoliate so much in early flower and it is definitely reducing bud size. Last round my bbb’s had pistil clumps twice the size at this time and they were dealing with severe deficiencies. I’m hoping it’s just genetics or the fact they are larger plants. (Day 15) I’m starting to see signs of N toxicity on the some of the new growth and overall growth on all plants except #1 has slowed. It was most likely caused by the foliar spray/tea combo. No more feeding anything for the next 12 days at least. Luckily it’s still pretty early in flower but I know that N tox can hit really hard after the stretch stops. I would be pretty upset if I vegged for 80 days only to get severe N tox in mid flower. Since it’s not breaking down in the soil, I should be fine. I’m going to defoliate some more of the large bottom fan leaves as they hold large reserves of extra nutes I don’t need. Hopefully these small defoliations aren’t stressing them at all. Next round I plan to do a big strip one week before flower, at transplant and a second big strip on day 21. (Day 17) I think I was over-worrying about the seriousness of the N tox. I’ve seen it hit very hard in mid flower and can’t be too careful. It’s almost always caused by water soluble nitrogen so I’ll try to stay away from that unless I absolutely need it. My case does not look to alarming just yet. I noticed the stunting on #3 right after that last tea so I am going to stop giving the last liter of compost tea because of how unbalanced and separated at the bottom it is. It sure helped out the other 4 plants that didn’t get the granulars from the bottom of the bucket. I‘m planning to give a bloom tea around day 26 and a final top dress a few days later. #1 has now out stretched everything else in the tent. I honestly was not expecting that. If #3 didn’t get stunted this whole week I think it would be the taller/heavier plant.
Likes
Comments
Share
@Cmccart
Follow
The fifth one got moved outside
Likes
12
Share
3/2 I gave my plant its first feeding. Gave it about half a gallon of water with a PPM of 500. I also thought about topping my plant but am not really sure where. I am not sure what one is the top spot as this is my first time every growing. I also finally received my ACInfinity CLOUDFORGE T3. This has allowed me to get my Humidity levels more under control. I was okay before because of the dome but for the last week or so I have not had a domain and my humidity has not really be regulated. 3/2 A few hours later I said fuck it and just cut the plant where I thought the top was. I cut off a few lower fan leaves. Not sure If its too early to do it or not. 3/3 Finally got my ventilation setup. I am not longer venting into the room my tent is in. I now have the exhaust being vented outside. This has allowed for better temps in tent. I am not longer being baked alive. I have also noticed a lot more stability with my temps/humidity now. Temps are sitting at 78-80ish and my humidity is sitting around 60 percent. 3/5 I started LST as my gardening ties arrived this day as well. 3/6 Today I gave just shy of 1 gallon of RO/DI water with a pinch of Epsom salt. I was waiting off as I forgot to added to my first feed on the the second. After the watering I also saw my rapid rooter exposed as the soil seemed low. I think I didn't fill the pot enough. I also added some extra soil to top up the pot and make sure the rapid rooter was buried. I also collected my run off and checked its PH and PPM. PH was 6.2 and PPM was 863. Plant also seems unhappy this morning.
Likes
21
Share
@BB_UK
Follow
Was supposed to update my diaries yesterday but literally forgot lol #edibles but they’re flowering nicely and stretching as they go! They’re truly loving life under the ts1000 can’t wait to see what the next week brings!
Likes
4
Share
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Sweet Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Purtroppo ho perso i file delle scorse settimane e dovrò reiniziare il report da ora scusate per il disagio Grazie a tutti per il supporto ❤️🍀🔥
Likes
45
Share
I am happy with the outcome of this grow. This was my first time growing autoflowers and ILGM genetics. Total wet weight was 1301 grams Total dry weight 8.5 oz These plants are very hardy and grow tall very quickly with the tallest plant reaching 4 ft tall. Each plant grew very different bud structures which resulted in some very dense and very fluffy buds. If you are looking for a very uniform growing plant with dense buds you may need to look for another strain. The smell from these buds are strong and amazing. I would describe the smell as fruity glue with rubber. I am overall very pleased with how this grow went and I cant wait to grow some more!
Likes
15
Share
@Rinna
Follow
What a run this was, harvested at day 70 of 12/12. Pheno #1 was the iciest from the start and hasn’t disappointed ever since. Amazing and beautifully stacked buds with and insane amount of trichomes! She looks truly amazing, very exotic bud structure too! The smells are out of this world with artificial cherry, cookies and gas terps. Can’t wait for her to be dried and cured for the final smoke test!
Likes
41
Share
Day 29-19/11/21 I’ve gave them nice bit of water today with bio grow and bloom. They are starting to bud!!!! Day 30-20/11/21 nothing new today just letting them grow!!!! Day 32- 22/11/21 I gave them water yesterday but forgot to take a pic a post it but everything is looking good!!!! Day 33-23/11/21 nothing new today but made a nice video for u all!!!! Day 35-25/11/21 I watered yesterday and I think I got a bit of burn I don’t know why but yeah tips are yellow!!
Likes
4
Share