Likes
7
Share
@Eddjack
Follow
Sta esplodendo si iniziano a definire le prime cimette. Inizia a emanare anche un buon profumo molto fruttato, per fortuna esistono i filtri ai carboni attivi. Ora sta solo ad aspettare dopo le carenze iniziali si e ripresa alla grande vedremo in futuro che succederà. Dajeforte growes
Likes
91
Share
ladies and gentlemen .... welcome to the end of this other journey together in the enchanted valley of Peakyplanters 🌈 My God .... the plant in front is really impressive 😲 it literally branched its flower around the net and a huge cactus came out of it !!! it was a real shame not to be able to balance the nutrition of the other two, this is the proof that each plant has its own diet! So, in a way, it lacks a little structural strength ... but all in all it wasn't that bad ... I only suffered a bit in the final weight Its flowers have a very particular smell 😋
Likes
151
Share
@CANNASIM
Follow
------GENERAL COMMENT------ Girls are moving forward, a lot of growth for the week, the two strains are absolutely different in terms of structure. Unfortunately the three Candy Kush did not sprout, so I will run only this two girls for this cycle. Down a bit the watering mainly doing a feed every other day, trying to manage the root mass to expand. Choose to do natures candy also in veg since i'm using recharge regularly, is 0-0-0 not noticing a lot of EC raise with it, velo kelp came in to play also. One dose of sensi Cal Mag this week since i notice some paling going on, my medium is inert by the way. ------SM.BLUEBERRY COMMENT------ She is creating a lot of foliage compared to the AK, both are in the same hight. May top in a week, this will depend.
Likes
30
Share
@GYOweed
Follow
Just been giving her water till today, megacrop part 1 only and 1/4tsp gal pk boost. Smells like sweet cucumber mmmmmm. Day 25 looks good imo. Got a clone or two of it for breeding.
Likes
23
Share
• French Macaron got planted into her 30 gallon fabric pot packed with HEAVILY-AMENDED Roots 707 soil. – No more BS soil for me. Back to the good stuff! • Took clones of the Chem Brûlée and Pineapple Meatball to determine sex •Those girls are extremely root bound at this point... but don't want to accidentally transplant a male into the BIG pots since I am on a plant count restriction (6 mature plants in California) Here's my Super Soil Recipe: Sonoma Sungrown 2021 Photoperiod Soil Recipe Makes ~8 cubic feet of Supersoil (enough for 3x30 gallon smart pots) 7 cubic feet Roots 707 Potting Soil .5 cubic foot worm castings 1.25 lbs. bone meal 1.25 lbs. fish bone meal 2.5 lbs. high phosphorus bat guano 2.5 lbs. blood meal 1.5 cups oyster shell 1.5 cups kelp meal 1.5 cups alfalfa meal 1/3 cup Epsom salts 1/2 cup agricultural lime 1 cup Azomite 1 tbsp granular humic acid 1 tbsp mycorrhizae (mykos)
Likes
7
Share
@Kushma666
Follow
Day 1 beginning of wk 3 flower fed the girls up this morning 4.5 ltr phostrogen to all but bubblegum #1 she gets fed 10ltrs of bud burst they are starting to smell so good 3 strains iv never grown before or even smoked lol exciting stuff 5-6 more weeks to go
Likes
30
Share
2025-10-15 2025-10-15 The Shaman was cut today. It's always bittersweet for me when it's time for harvest. Like every time I've grown her, I had so much fun and joy—just looking at her brought me happiness. SHAMAN is a keeper in my outdoor genetics. She is easy to grow from start to harvest, always a pleasure. Despite the fact that this year she took longer to mature, I can't blame the genetics—all my outdoor plants were 3-4 weeks later this year. It was simply the conditions. Let's talk about conditions: The soil bed is prepared in autumn the year before and refreshed in springtime, so the plant always has at least 60 cm of deep, nice, and fluffy enriched soil base filled with microorganisms, microbacteria, and mycorrhizae. The roof is the most important part. This year I added 2 SCROGS—that was great! She stayed stable during heavy wind and rain and kept on shining after the storms. I'm very pleased with the outdoor season overall, despite a very cold and wet spring and summer with only short periods of hot and sunny weather. The girls in my garden didn't care and kept growing and blooming until the last day. Thank you @DutchPassion_Official for the seeds—I still have 2 left for next year. My first Attempt with SHAMAN https://growdiaries.com/diaries/27066-shaman-dutch-passion And the second Run https://growdiaries.com/diaries/106092-grow-journal-by-mrs-larimar Breeders Infomation: Shaman is a solid, highly powerful F1 hybrid. This mostly sativa strain has the THC level of 13.7%. It consists of 75 % sativa and 25 % indica. It is perfect for the outdoor and greenhouse cultivations. The plant is resistant to the mould and the bud's rot due the open structure. It has a big intermodal distance between the buds. The flowering time is 8-9 weeks in greenhouses. The plant reaches 1-1.5 m in height. The sweet woody smoke brings a sensual high-quality sativa effect. I hope you all enjoy reading my diary. stay hydrated legalize worldwide
Processing
Likes
17
Share
@kcartel
Follow
Growing point: Indoor Growing method: Substrate "Coco Coir Pith Brick" (PLANTIT) + peat 5l. Vermiculite clay / ordinary Size of box: Ext. 47x50x59 ext. cream Polypropylene 390x190x182 Lighting: LED-HP-PRO 125W / 230V / E27 / 6500K / 5850lm Channel fan: EK100 15W / 32db Fertilizers: GHE/Flora (Gro/Micro/Bloom) General Hydroponics Calcium Nitrate 0.5 Magnesium Sulphate 0.5 Seed Type: Ultra Haze Auto FEM (Euroseeds)
Likes
1
Share
@BigGGrows
Follow
The buds did seem a little airy and fluffy after dry trim. Granted they were full of trichomes, although i do wish they were more dense. The plant did spend its last 5 weeks of flower outdoors in the greenhouse so possibly the extreme heat could have been the culprit. She is full of dark ember orange/red hairs and has super bag appeal. The smoke is smooth with a high that just smacks you about half way through the joint. The smoke was smooth and the high was very indica dominant with an initial hour of cerebal pleasure proceeding the later heavy high . Very unique and wonderful smell as she cures. The high is very strong and clear minded. Its good for an evening smoke in my opinion. Can be a heavy high but without the couch lock.
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
2
Share
Woche 5 – Struktur beginnt Die Laughing Buddha wurde diese Woche getoppt und geht jetzt in die nächste Phase. Das Topping fällt bei mir immer sehr mini aus um der Pflanze nicht mehr Stress zuzumuten. Außerdem gab’s ein leichtes Topdressing mit Bio Grow (1 g/L), um sie für das kommende Wachstum zu pushen. Die kleine Lampe wurde durch die Spider Farmer SF1000D ersetzt – jetzt gibt’s deutlich mehr Power von oben. Jetzt heißt es: erholen, verzweigen und Struktur aufbauen
Likes
23
Share
Plant A seems to be packing weight on now had to tie a few branches up, Plant B seems behind i think its because it just kept on stretching done abit more defoliation on it throughout this week, Plant C is A lot smaller than the other 2 and is looking a lot more closer to harvest its currently 5 days into a flush, the best pictures i could get of the trichomes i have added can anyone tell me what they think from my pics how much longer i think a few days but this is my first grow? Would appreciate anyone comments thanks
Likes
9
Share
Beginning of week 3 and I have selected the 4 best plants out of the 6. Those 4 plants have been repotted into Freedom Farms 20l fabric pots with the same FF Formula 1 premixed soil. These plants have been placed into another tent with the 400W MH to finish vegging.
Likes
5
Share
Perfect to this point dense even colas. Smelling great covered in 💎 last week has been compost teas last one given today. Only water for the next 7-10 and nothing after that till harvest besides 36hr of darkness Home stretch time
Likes
21
Share
Week 5 of flower is over! This grow is going by so fast because I'm so busy with so many other things I feel like I haven't really paid much attention to these girls but they are doing so well. Bulking up heavy now. Smell is amazing. Very dense buds. Can't wait to try this one out. Few weeks left now.