Likes
Comments
Share
Likes
2
Share
Likes
16
Share
They all basically look the same at this point. Plant 4 popped a day later so it’s a little smaller. At day 12 I sprinkled some great white shark around each plant. And added just 1 tsp of green harvest bone meal.
Likes
11
Share
@Mimi420
Follow
Day 49 of flower — Harvest season creeping up Yo — quick GD drop from my 120×80 SCROG. Plants are looking proper: fat, frosty colas everywhere and the tent stinks so good. I’m switching to water-only from here — flushing the last stretch. Trichomes are mostly cloudy with the odd amber speck showing; I’d say the whole lot will be ready in ~7–14 days depending on how the last swing of amber develops. Big realities: my garage is cold & wet (nights down near 5°C, RH ~80–85%), so humidity’s been the constant headache. Ordered a Spider Farmer heater to push intake under the canopy but delivery got delayed — super annoying. To avoid chill I’ve had to cycle the inline fan overnight and run a tiny cabinet heater to keep temps around 15–17°C, but humidity still spikes. Zero perfect conditions here, just making it work — and honestly the cold gave me some gorgeous colours on the buds. Notes & general vibe: buds are tacky as hell — every time I touch a cola my fingers go sticky with resin. Little amber popping on the tricomes now, mostly milky — perfect for couch-locky daytime/ evening smoke depending on how much amber develops. Strain-by-strain snapshot (positions + quick notes) Back-left — Wedding Cake (Portland) Nice chunky cakes, early fatteners. Lots of resin, big rounded colas. Colours starting to deepen on leaves, smells super dessert-y under HPS — heavy trich coverage, finishing fast. Back-center — Kush Crasher The Kush genetics show: purple/burgundy stacks and dense nodal buds. Slow to bulk but super frosty now. These ones are gonna be super sticky and couchy — big terp punch expected. Back-right — AK-47 Classic heavy producer — loads of colas, reliable chunky structure. Stretches a bit less, packs resin fast. One of the more even finishers in the tent. Front-left — Double Krush Longer skinny colas but dense calyxes — nice structure for my net. Terp-forward, stacking trichs well. Good contender for chop in the next week. Front-center — Wappa (PARADISE) — main cola boss She’s my star. Main cola is packing insane weight and is the most consistently chunky plant in the line-up. Colours are gorgeous — deep purples, dark greens, and a thick resin coat. Wappa’s bulking like a champ and will be one of the fattest buds in the harvest. Massive praise for this one — she’s the poster child for this run. Front-right — Detroit Runtz Frost city — tiny sugary calyxes and lots of sparkle. Slightly looser than the Kush lines but super resinous and fruity-leaning. Good final week filler. Quick operation notes Water-only from now on (flushing). Trichomes: ~mostly milky, some amber; keep checking under loupe. Humidity = main enemy. Heater + proper intake/exhaust under canopy will help once the SF unit arrives. I’ll do final clean-up lollipop & remove any really dead/dying leaves before chop. Final thought — for an amateur out of practice I’m stoked. Learned a few lessons (humidity control = everything), but the tent’s delivering fat, sticky, colourful colas. Wappa deserves a medal — she’s the queen of this round. Green vibes✌️🌿
Likes
4
Share
@Randagio
Follow
Giorno 12/05/2026 ho eseguito topping sulla cream caramel cbd essendo in un vaso leggermente più alto si stava alzando troppo e ho voluto fare una prova do solito faccio sempre LST questa e la mia prima cimatura infatti credo di aver commesso l'errore di farlo troppo presto per ora sempra ok ma continuerò a monitorare
Likes
36
Share
This week was nice. Really beautiful hues coming through, great structure , no f ups. The smellsAre amazing. I have started the ripener and cut back on nutrients - after heavy calmag week before and full feed. Aim to do this all this week ready for the flush week
Likes
4
Share
30/3/26 🌴 Seguimos añadiendo más bacterias concentradas en polvo para ayudar al desarrollo de más brotes! Junto con el delta9 solo puedo esperar una producción de flores masivas Están todas las plantas de una manera increíble con ese rezo que me encuentro en las mañanas antes de salir al curro y verlas todas trabajando a todo trapo! Esta vez sé que vamos en el camino correcto solo puedo esperar a que siga así! 🥁🥁🥁saludos a todos
Likes
8
Share
@Gram_Solo
Follow
😎 Had to reduce the light to 50% as they are getting too close,.they done a mad stretch but S seem to doing okay no signs of burns, Been rotating the plants so they not getting to cooked in same spot. Took away the bottom 3rd of the plants to concentrate on top buds. Reacted very well to the stress. Supply run this week Smell is slowly rising 👀👃💨💨💨
Processing
Likes
27
Share
9.30 - I build a little fermenting CO2 generator this week, mostly for shits since I'm not going to seal the tent up. Otherwise things are going as expected. Noticed a really big change in bud structure and how they are densing up. Really enjoying the show and the change in colors and pistil behavior. Got her propped up to increase circulation and get a better idea of when she needs water. 10.1 - Just documenting the bud evolution for fun :) 10.4 - Whatchu guys think of my rescue marijuana plant!? Not bad, huh?! 10.6 - Plant grew some new whites and oranges and buds are bigger 10.7 - changing every day. What a wonderful thing
Likes
14
Share
@nonick123
Follow
Día 36 (17/02) Riego con 500 ml H2O EC 0,45 Un stretch espectacular! Día 37 (18/02) Riego ligero con 250 ml H2O EC 0,45 Ha disminuido un poco el consumo de agua Día 38 (19/02) Riego con 250 ml H2O EC 0,45 El stretch es increíble y precioso 😍💥 Día 39 (20/02) Riego con 500 ml H2O EC 0,45 Hoy se muestra más sedienta después de unos días con menos demanda de riego Día 40 (21/02) Riego con 350 ml H2O EC 0,45 Día 41 (22/02) Aplicación foliar con Sales de Epsom a 4 g / L (La planta presenta carencia de Magnesio con manchas necroticas en las hojas de abanico inferiores) Riego con 350 ml H2O EC 0,45 Día 42 (23/02) Lollipopping y defoliación ligera! Debido a que tiene un stretch espectacular (alrededor de 57 cm de altura) elimino todas los nudos / ramas que no superan el 50% de la altura de la planta Elimino un par de hojas de abanico grandes Riego con 400 ml H2O EC 0,45 🚀 Khalifa Genetics - https://khalifagenetics.com/product/lemon-blanco-v3/ @khalifa.genetics 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
8
Share
🌸 Week 7 – Gorilla Cookies Auto Pheno Hunt Another week has passed and flowering is now in full swing across all 6 phenos 👀🔥 The differences between the plants continue to grow, and it’s becoming easier to see which phenos have the potential to become real standouts by harvest time. 📈 Current observations: Pheno #1 and #6 have finally started to catch up and are now slowly building buds as well 🌸 Pheno #5 continues to dominate the tent and has stretched to an impressive 130 cm The flower development on Pheno #5 is especially promising, with some bud sites already suggesting the potential for 25 cm+ colas if everything continues as planned 🔥 Pheno #2 and #6 are being overshadowed by the larger phenos and are clearly falling behind in overall size and vigor The structural differences between the phenos are now more obvious than ever, with some focusing on height while others remain more compact and bushy 💡 Environment & setup: The grow has now reached its current limits in terms of space and lighting: Light fixture raised to its maximum height Light intensity increased to 80% Summer temperatures pushing the tent up to around 32°C ☀️ Relative humidity averaging around 67% Despite the higher temperatures, the plants are still pushing forward and stacking flowers nicely. The next few weeks will be all about bud development, density, and resin production. 🏆 At the moment, Pheno #5 is definitely demanding attention, but there is still plenty of time for surprises. Sometimes the biggest plant doesn't end up being the best one, and that's exactly what makes a pheno hunt so exciting. 💬 Which pheno do you think will come out on top when harvest day arrives?
Likes
44
Share
**Encontrarás la traducción a español al final de la descripción** From/Desde: 10/05/19 || To/Hasta: 16/05/19 From day/Desde día: 78 || To day/Hasta día: 84 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.com/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- 5 - HomeMade Organic & Cheap CO2 generator (more info in week summary) 9, 10, 11 & 12: The bud on the right is a Gorilla one, the buds in the left or/and in the middle are Money Maker ones. 15 - Same Gorilla plant buds, one affected by CO2 in the roots and the other not. -----WEEK SUMMARY----- The smell is more sweet and intense every day, friends that came home turned them eyes into crystals when they see this little babys. The size isn't awesome, but the high ammount of buds full of crystals plus the strong sweet aroma makes them awesome. Buds are growing and fattenning very very well. This week i added a boost of HomeMade CO2, i never measured the results of this invention so i can't give CO2 measurements. This method is widely used in home aquariums and there is where it comes from. For those interested i'm going to write here more detailed instructions. The 4 liters i've made will last for about 2 weeks. ---NEEDINGS--- - 250 ml Bottle - 6~10 l Bottle - 400 g Sugar / l water - 1 Envelope of organic baker's yeast / l water (CHEMICAL WILL NOT WORK) - 3 mid plastic tubes 40~50 cm - 1 short plastic tube 5~6 cm - 4 tube adapters - Hot glue to seal adapters The process of creating CO2 is simple, mix water, organic yeast and sugar in a bottle, and the sugar will free CO2 in the process of fermenting to alcohol due to the yeast. 1. Make a hole in the center of the big bottle cap, insert an adapter and secure it with hot glue 2. Make 3 holes in the small bottle cap and glue the other 3 adapters 3. Link both caps with one of the mid tubes and insert the other tubes on free adapters 4. Insert a short tube in the bottom of the small cap in the adapter that came from the big cap 5. Watch the Video!! -----WATERING CALENDAR----- Plants are beginning to drain the pots a bit faster so from now on i will raise the water ammount on each watering day 0.25 l. 11/05/19 - 1,5 l with All week nutrients -(Nirvana & Blombastic) also Big Bud half dosed @ PH6.4 & 2 E.C. 14/05/19 - 1,5 l with Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym & Blombastic @ PH6.4 & 1.5 E.C. *****ESPAÑOL***** -----IMÁGENES Y VÍDEOS----- 5: Generador de CO2 casero, barato y orgánico (más info en el sumario semanal) 9, 10, 11 & 12: El cogollo que sale a la derecha es de una Gorila, el de la izquierda y/o el de en medio son de una Money Maker 15: Dos cogollos de la misma planta, uno afectado por CO2 en las raíces y el otro no -----SUMARIO SEMANAL----- El olor es más dulce e intenso día a día, los amigos que vienen a casa a verlas se quedan ojipláticos al verlas. El tamaño no es una maravilla, pero la gran cantidad de cogollos llenos de cristales añadido al aroma que entra por las fosas nasales las hacen increíbles. Los cogollos crecen y engordan de maravilla. Esta semana he añadido un boost de CO2 casero, nunca he hecho mediciones de los resultados por lo que no puedo darlas. Este método es ampliamente usado en peceras caseras y de ahí saqué la idea. Para aquellos interesados dejo aquí instrucciones más detalladas. Con los 4 litros de agua que he preparado yo da para unas 2 semanas. ---NECESITAMOS--- - Botella de 250 ml - Botella de 5 a 10 litros - 400 g de azúcar por litro de agua - 1 sobre de levadura de postre orgánica (LA QUÍMICA NO FUNCIONARÁ) - 3 tubos de plástico de tamaño medio 40~50 cm - 1 tubo de plástico de tamaño pequeño 5~6 cm - 4 adaptadores para los tubos - Cola caliente para pegar y sellar los adaptadores El proceso de generar CO2 es simple, mezcla agua, levadura orgánica y azúcar en una botella, y el azúcar liberará CO2 en el proceso de fermentación a alcohol. 1. Haz un agujero en la tapa de la botella grande, inserta un adaptador y séllalo con cola caliente 2. Haz 3 agujeros en el tapón pequeño y haz lo mismo con los otros 3 adaptadores 3. Conecta los 2 tapones con uno de los tubos y conecta los otros 2 tubos a los adaptadores restantes 4. Conecta el tubo pequeño en la parte libre del adaptador del tapón pequeño que viene del tapón grande 5. Mira el vídeo -----CALENDARIO DE RIEGO----- Las platas comienzan a secar los tiestos un poco más rápido, asi que de ahora en adelante incrementaré 250 ml de agua adicionales en cada riego. 11/05/19 - 1,5 l con todos los nutrientes semanales -(Nirvana & Blombastic) BigBud mitad de dosis @ PH6,4 & 2 E.C. 14/05/19 - 1,5 l con Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym y Blombastic @ PH6,4 & 1,5 E.C.
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 11/1- Here we go into the fourth week for the FastBuds Strawberry Gorilla Auto's and they are all looking great, and are very healthy! I'm continuing the feed schedule of six, 15 minute feeds daily and am leaving the nutrient level at 900ppm. The HLG 650R is now at 100% output, and is hung 28" from the canopy. I'm keeping a close eye on all of them, looking for the first signs of flower. I also am diligently tucking shade leaves away daily trying to get some light down into the plants. 11/3- Yesterday I decided to do a little bit of defoliation, removing the largest shade leaves on all three which really helped with light penetration. Today all of the plants looked none worse for the wear, and as spunky as ever! 11/5- All three plants are now in flower, I have done LST on all three, tying down branches with horticulture wire. I've also done some defoliation on each plant as they got extremely bushy and were getting zero light down into the lower sections of them. All have responded extremely well to the training and are looking great! Tomorrow I will empty and clean the reservoir along with the 'brain bucket' as the water has really gotten funky and has an odor that I don't like. Going forward, I'm going to be doing weekly changes on the reservoir where I'll empty/clean/refill and add fresh nutrients. In between changes I'll just be topping off the reservoir with straight water and only checking the PH. 11/7- There goes the first week of flower for the FastBuds Strawberry Gorilla's and they're all looking pretty darn good, all things considered. I can't wait for next week to see these girls really start to get going! Thanks for stopping by!😎❤️ 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Likes
9
Share
@Jofflepov
Follow
Plants grew fast. They're ready for going out now but they have to wait 2 more days. I had troubles finding balance between watering and nutrition. I'm waiting for some good soil in two days and I will transplant these girls in their 3g pots outside. I hope they make it two more days in this poor Cocomixture and that they survive a transplant in far richer soil in the sun.
Likes
9
Share
In der fünften Blütewoche zeigt sich der Erfolg des Scroggens deutlich. Die Pflanze hat das Netz vollständig durchwachsen, und die Blüten verteilen sich gleichmäßig über die gesamte Fläche. Um die Stabilität der immer schwerer werdenden Blüten sicherzustellen, habe ich zusätzliche Netze aufgehängt. Außerdem habe ich die Beleuchtung von 400 Watt auf 720 Watt erhöht, um den Blüten noch mehr Energie zuzuführen und das Wachstum weiter zu fördern. Die Ergebnisse sind bereits sichtbar, mit dichten und kraftvollen Blütenständen, die sich vielversprechend entwickeln.
Likes
2
Share