2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)

Week 6 Flower

As we can see I’on on my pre flowering need some advice if I should train them or just let’em grow ? ตอนนี้ บางใบมีสีออกเขียวเเกมน้ำเงินทางปลายครับ คือ mimosa cake ส่วน forbbiden runtz เราก็เขียวดีสีไม่ตกครับผม

. 📹 : Full Video on YouTube @hinterhofgrower, please like & subscribe 🌱 : Chiropractic & Defoliation on day 38 & 40 💧 : 4l day 36, switch to wicking SIP; 4l day 38, little runoff, 4l day 40 💡 : Dli: 45 mol/m²/d 🤔 : In week 6, the stretching began. To control the plant's height and ensure all flowers receive equal light, I used the Kushman Chiropractic technique. This involves softening branches by applying gentle pressure between the fingers, making them easier to bend. It also increases the plant's activity as it tries to strengthen the bruised area. A little LST (low stress training) and, of course, defoliation were also part of the process.

Hey, there peeps! Apologies for not updating my diary as I have been quite busy balancing non-plant responsibilities -.-! Anyway, we are now on day 75 since I ordered my equipment and started germinating my seed and day 71 since I placed my seedling in her first Coco pot! She is now a staggering 4 foot 2 - which was overwhelming considering this is my first grow and orginally only cleared out 2/3 of my cuboard but now it uses the whole space but she's coming along so well! I have also added a LED Grow Light Full Spectrum 50W Red COB as I wanted some extra light for the bottom half nuggests. She is very healthy (I assume from the strong healthy roots) and hasnt shown any major defects other then the initial defects i encountered in week 2-3 and slight light burn on the top cola in week 7 which was from the plant growing so quickly and touching the light, but I did then adjust the light within 2-3 hours. What do you guys think and how did she get so tall consdiering she is an auto-flower and the strain is meant to be indica domiant?

Defoliated here and there, she's stretching hard now so I'm gonna have to wait a few more weeks before I can really start stripping and defoliating her. Because I LST, topped, and then super cropped all the main branches, there's way to much branches for the available surface.

Let's start another week😊The girls are doing great ! They received a single dose of Final Solution and Organic Bloom Stimulator.White Widow X Big Bud has started to give off a very intense aroma.Due to the density in the tent, it was necessary to install an additional fan.Looking at the progress, I expect a harvest sooner than declared.

Bellissime,abbondanti e cariche di infiorescenze resinose e profumate! Dimensioni grandi e qualità altissima! È stata una settimana bella e calda e ormai siamo in estate quindi continuano a riempirsi di infiorescenze molto resinose e dure. Ogni varietà è una vera soddisfazione! Grazie a tutte le banche dei semi che hanno creato queste varietà magnifiche! Per alcune manca poco alla raccolta mentre altre ci vuole più di una settimana di attesa anche due settimane. Sono felice, bravissimi tutti.

Well, after majorly fucking up the princesses (but hoping one still survived) next in line are 2 North Thunderfuck. I named them Ei and Makoto (iykyk ^^) D1: this time we go the direct-to-pot route. Fuck plugs, fuck everything, we are raising two little fuckers! Hopefully with a better start this time... I swear Ill be patient.... I swear XD Like planned they will spend some time in the kiddie tent with their new light, and then take it over to the grown up tent once there is room over there. Lets go! D3: zzzzz ^^ D4: We have 2 healthy babies! Needed to help Makoto a little shed to her skin (veeeeery carefully with a toothpick). Welcome, girls! Can't wait to see your journey! They will be accompanied by a timelapse video, hope this time it looks better and is without stripes XD

here is day 42 of flowering. she is a doctor she can be sick heheh. she has nice fat and sticky buds. the smell is so sweet.

Giorno 6 annaffiata con 2,5L di acqua Giorno 7 defogliazione

Day 75: Due some heat problems inside, some started to foxtail, some leafs got burned besides being yellowed which is normal in this phase. This happend because the outside climate, which heats the walls of my growing space and warms the fresh inflate air. The temperature outside increased by 4-7 degrees. So my room is no longer 25-28 degrees celcius, but now is like 30-31 which is a huge problem. This is the negative side of having lots of heat lamps instead of cold LEDs. Did add an airco unit with a easy fix. Might change it into a better fix but I don't have much time. After the pictures, I started removing old leafs,fixing some plants and gave them water. I don't like to take pictures afterwards, it doesn't show reality. See you guys next week.

Week 7

Hello my friends, ...June 24, 2022..Day N°94.. ...Flowering day N°48... My 2 Feminized Runtz Gum, 2 Feminized zkittzy Gorilla and 2 Feminized Banana Sherbet are fine. The buds are very sticky, hard and very smelly, wow ! I gave them water with some Hybrid and Booster powder from Green House Feeding and some Cal-Green from Metrop. My babys are under a Mars-Hydro SP 3000 at 80% of power and at 30 cm of the canopy. www.originalsensible.com www.mars-hydro.com That's all for now my friends, thx for passing through here. Wish you the best with your green projects. See you soon..💨💨💨

The buds were easy to trim, except they were super sticky but that’s always a good thing! I got two phenos: the first one with that garage-like aroma, and the second one, 100% Blue Cheese!

First of all I’d like to give a big thanks to Ganja Farmer Seeds for this opportunity to try out their genetics . Also thanks to Mars Hydro for this TS1000 I was able to grow them under . The grow was super fast . These babies were the fastest flowering strain I’ve grown so far . I’ll be back once they’ve dried to give their dry weight and trimmed bud pics .

The growth cycle was pretty short, realizing that I planted it late in the year with the sun setting way sooner. Overall great experience

beginning of the fourth week🌻 everything is going well. made another small defoliation🍁 where it was needed. girls 🌱keep eating all the nutrition that my diet is good for them!👍 I'm waiting for the flowers to explode!💚👽 Day 25👍🌻👊