Likes
Comments
Share
@russrahl
Follow
I converted an old cloning machine I had DIY constructed a few years ago into being able to do clones still and also start seeds in peat moss pellets. Hopefully it will work as good as it did for my clones, I had 100% success rate for clones in it before. I have 3 Obi-Wan Kush seeds that sat in a cup of water overnight and then put in the peat moss pellets Into the cloning machine. It is sitting in 24 dark untill the seedlings emerge. I am starting them in my veg tent that is 4’x4’ under a Morsen 1000w(170w true power) LED. I will be moving them to 3gal DWC buckets when they are done rooting in my machine and add another 1000w Morsen LED. We will veg in this tent for approx 4-6 weeks before moving them to my flower tent with a 1000w HPS on a light mover in a 4’x8’ tent with a 5gal RDWC setup. I have grown this strain before from Canuck Seeds and it is one of my favourites to grow and smoke. ****update: so the peat moss pellets where a bust in the cloning machine so far...lol They where just to wet and where probably starting to drown the seeds. So I took them out and have them in a seedling tray drying out. I Will just be putting them in my DWC starter buckets once they sprout up.
Likes
7
Share
@AsNoriu
Follow
Day 114 since seed touched soil. Again troubles .... Came to check them and found tent dark. Normally theirs day was in the night, now one day we again had no electricity and everything moved 8 hours, so day is day now .... Humidity spikes as hell. I dont want to make wounds, so no defoliation ... just too big of a risk to damage or bring infection in .... Ground level 99% rh, canopy level - 85, lights level - 80 .... never grew in such hight, i did in 65-70 without problems, but this goes overboard ... Drinking slowed down, will reduce volume by 20% next watering. One more feed left. Keeping sticky pads as prevention and it helped to catch 50 or so bugs and maybe prevent infestation. Gnats mostly ... This this girl will fight for first spot by weight, she is packing nice. Maybe see some foxtailing ... 10 days till chop !!! Hope no bud rot !!! Happy Growing !!!
Likes
1
Share
@PapaTerps
Follow
British Delight - Wizard Trees Day 63 - Watered with 3L of RO tap water with nutrients, mixed individually, in order and then pH'd to 6.3! She has pretty much finished her stretch and is now focusing on developing her bud sites! She very very bushy and with big heavy fan leaves, so she'll require a good amount of defoliation later in the week, but for now I wanted to give her a couple of days to rest because she has only just finished the stretching phase... I'll update this week to show the progress she's made, but for now, I'm just going to let her be 🙏
Likes
12
Share
@AllieO
Follow
2/2: Some of the huge fan leaves had to go. Not even the strongest of tucking would control them. Flowering is officially starting! Trying to rotate to get as much light to bud sites as possible. Excited to see where things go with this one. 2/5: determined that there was a bit of a light burn situation. Decided to pull her from the tens for a good flushing and then rearranged the tent a bit to keep her off to the side a bit. 2/7: she's a big girl. I have her flying solo in the tent for now..
Likes
7
Share
Well, the drought stress in week 11 really fucked my plants up, but Twiggy recovered, while Zoey was hurt pretty bad. If I did nothing, I'm betting harvest would've been 25% more, and Zoey's buds wouldn't look so crappy, but overall, I was so happy with this grow! I was under a time crunch, so only did minimal veg for 4 weeks, topping once. Daily watering with 1.8EC mix that was pretty consistent. Kept pH between 5.5 and 5.8. Kept tight control on humidity and temperature up to mid flower, then kept air circulation on to keep room humidity around 55% Things I'd do differently: 1. Veg longer - I'd love to try a mainline 2. Canopy control - wish I had spent the time on a SCROG screen, or at least a couple of rings. 3. More light sooner into flower. Waited about 4 weeks into flower before maxing out the light. Probably could've bulked them up significantly if I started earlier 4. Drought stressing - For Fucks Sake, keep a close eye on your plants, and the minute they start to wilt, get the water back on 'em!!! 5. Measure your run-off more frequently for salt build-up. Didn't have any problems, but it's a good best practice. 6. Set up proper closed-loop environment to allow for CO2 enrichment. 7. Set up a clone environment before you get to flower. Oops. Things I was happy with: 1. VPD control system (heat, humidity) during veg and early flower worked flawlessly. Never any nute burn, and super healthy plants. 2. Sterilized soil and grow-room before starting - never had a single bug or any mold/mildew issues. Used a MERV 13 filter on the air intake, exhaust through carbon to crawlspace. 3. Coco/perlite mix - super drainage, low build-up, very healthy roots. 4. Power meter - neat way to measure what's really going into the grow, so when your wife complains about power usage, you can show her the real numbers. 5. Photone app on Android S20 - Knew where my PPFD was for optimal growth control. 6. REX-C100 PID controller for toaster oven - super tight temperature control comes in handy for decarbing as well as toasting oak for moonshine.
Likes
14
Share
the little one is rising quickly this week, I think it will last another week, a week and a half at most, before dedicating itself to full flowering. the seedling entered the pre-flowering phase a few days ago (2/3 days ago)
Likes
7
Share
@Dunk_Junk
Follow
Wow 19cm taller this week! Nice growth so far.
Likes
12
Share
She doing so good after the lst I did earlier this week. Topped her towards the end of week 3.
Likes
2
Share
@Bncgrower
Follow
Final stretch, next week it's time to flush them. The smell is really strong when I open the bedroom door, I believe in an extremely satisfactory result.. ❄️💪🌲 ***The photo of the trichomes ended up getting mixed up, so I'll post photos of all the plants.
Likes
13
Share
Likes
9
Share
Giovedì 17 ottobre switch a 12/12 Prossimamente cambieremo soluzione. Rinnoverò anche tutti i nutrienti con la fase vegetativa e loro continueranno a crescere fino a che iniziamo a vedere i prefiori e cui di ricambierò l'acqua con la soluzione e adatta, al momento tutto apposto! Venerdì 18 ottobre 2024 Svuoto la vasca, cambio soluzione. Partiamo da 75 lt acqua demineralizzata ec 235 ph 9.5 Aggiungo tutti I nutrienti indicati ottenendo ec 1318 ph 6.2
Likes
16
Share
When I got into the room one day before I scheduled the harvest, her branch collapsed under the weight of the buds. Not surprising, the buds were massive and dense! This is one of the best problems to appear during a grow, could never be mad at a plant for lack of strength to support the massive buds. I decided to view it as a sign from the plant, that it's done, it had enough, so the harvest happened a day early. Her buds were too tall for my DIY Cooler and since the buds were so dense, it wasn't easy to get to the stem to cut it and since the buds were covered in trichomes, the gloves were super sticky. The genetics were pretty amazing to grow, super happy plant with amazing growth - thank you, @Exotic_Seed for the seeds! 🙏
Processing
Likes
17
Share
Hey guys idk what’s going on my autos it seems as if the Gelato and Zkittlez has just stop growing completely I mean there’s no change at all the Zkittlez Og is starting to fill in forming nice little buds but my other autos seems like they had stop completely I know the lifespan on the Gelato is 76-80 days from seed to harvest The Zkittlez lifespan said the same 76-80 days from seed to harvest Zkittlez Og lifespan is 80-90 days from seed to harvest And I know I’m for sure March 9th marked the 60th day on all autos and I know I stress the hell out of them overwatered etc but it looks as if I might only have one plant to successfully make it yet this is my first grow and why I choose to do autos first to give me a little insight on what I’m doing but I’m going to let these girls go for a full 90 days before I decide to trash em and focus purely on my clone grows
Likes
5
Share
In dieser Woche hat sich sehr viel getan , die Blüten sind herangereift und haben nochmal etwas an Volumen dazu gewonnen.😍 Der Geruch ist sehr stark und die Terpene intensiver geworden. Es sind vorallem, Benzin und süße Düfte wahr zunehmen 🍬⛽️ Der Runtz Teil überwiegt leicht . Die Skywalker OG Runtz Auto brauch nicht sehr lange um die Blüten auszureifen. Deshalb habe ich hab dieser Woche, begonnen die Pflanze mit Flawless Finisch zu spülen und so auf die Ernte vorzubereiten 🍁🙌🏻
Likes
27
Share
@Herbinski
Follow
Today was the last day of 18/6 hours light schedule!! I just changed the timer to 12/12 I increased the Bilberry lamp from 60 to 70% Power. During this week I really had to increase the amount of both water and nutrients, Just like the breeder said, she starts to eat a LOT already in the vegetative stage so I fed her a lot and even thought I did I noticed small signs of deficiencies on the lower leaves, Mid week I re potted Her to a 25L container and cut out some of the fan leaves just as the breeder recommended. The reason I follow the recommendations is I have grow Sherbinskis line before and the end effect is so much better. Also starting to keep a big temp difference between night and day. As you can see She is growing very fast.
Likes
82
Share
Oh man, she hit a growth spurt this week! Had to seriously move the light up and then she wanted more!! Made it to day 21 and cleaned right on up! Shes lookin purr-ty now boys!!