Flowering day 22 since time change to 12/12 h. Hey guys :-) Another great week that is over. They all develop exactly as it should be 💚. Since the last leaf and substrate application against tripse, I finally haven't seen any of the little biters 👍. Watering was done twice this week with 1.3 l each time (see table above for nutrients). The lowest shoots were removed so that the energy is not wasted in the lower part :-) . Otherwise, as always, everything was cleaned and checked. Fresh osmosis water was filled with stale tap water in a 100 L tank for the coming week 👍. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Bon voila ! les larves de chrysopes sont arrivées, je les aime bien car après avoir mangé les thrips sous toutes leurs formes, les chrysopes adultes restent dans la tente, très utile en cas de nouvelle invasion de thrips... en seulement 2 jours on voit que les feuilles des plantes ne s'abîment plus et redeviennent bien verte, c'est plutôt bon signe... ma petite bouture acid dough entame donc son reveging, les fleurs qui restaient s'allongent et des nouvelles feuilles à 1 pale sont apparues, pour le moment elle fait un peu mutante mais je ne m'inquiète pas, affaire à suivre, en attendant arrosage à l'eau, et je prévois un TCO la semaine prochaine.

Wish I could have vegged the clones another couple of weeks but the Zkitzo was just growing to fast. In hindsight shouldn’t have put a plant from seed in with the clones. Seeds always grow like mad in NFT and clones are more manageable as they don’t have a tap root. Still got some absolutely beautiful looking and smelling bud from the Zkitzo so can’t really regret it. The Gelatos are rock solid right through and look absolutely beautiful. Used rainwater right the way through on this so should smoke nice to. Better pictures as it dries.

First official week of flowering and I can’t be any more exited for these bad girls. I switched their nutrient intake for flowering aswell as their light cycle. One of the autos seems to be showing a minor deficiency hoping to fix it this week as for everyone happy growing😃.

Hab unglaublich viele Blätter entfernt. Wird den Buds gut tun.

ALRIGHTY THEN REMINDER I DO 2 UPDATES PER WEEK 👉WEEKLYROUNDUP👈👉MIDWEEKLY UPDATE👈 At this very moment , hint of Grape Crush Soda smells 😛 Which is awsome We just hit week 8 and all is well , for the most part , had some Cal/Mag issue early week 5 but hopfully with some adjustments ive made I got it under control 😃 ....... Her little sister was also showing Cal/Mag problem but like her big sister I have made adjustments and hope that works 😲 They are so quick 👈 Baby Sister Plant #2 Is 6 weeks 42 days from seed rain water to be used entire growth👍 Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉IF ANYONE IS LOOKING FOR A PLACE TO HANGOUT VIA GROWDIARIES AND TALK GROWING AND JUST CHILL AND WHATEVER .....👈 👉I CREATED GROWDIARIES DISCORD SERVER !!!!!!!!!!!👈 LINK IS 👉 https://discord.gg/zQmTHkbejs AND SEE HOW IT PLAYS OUT !!!!!!!

Week 8 Flower (Day 85-91 | Flower Day 50-56) Day 85 - Feb 19 (Flower Day 50) 00:10 pre top-off: pH 5.95 / EC 1.674 Post top-off: pH 5.88 / EC 1.658 Noticed again that the real bulking seems to be happening under the very top tips. Pistils lower down are still white. This matters more than the “top of the tops” look. Day 86 - Feb 20 (Flower Day 51) 00:10 pre top-off: pH 5.92 / EC 1.804 15 min post top-off: pH 5.95 / EC 1.720 EC had crept up. Top-off brought it back down. Plant posture looks good (praying, not tacoing). Still feels like she’s in “steady stacking” mode. Day 87 - Feb 21 (Flower Day 52) Reservoir change at 01:00 New res: pH 5.78 / EC 1.752 Fed ½ dose of what Advanced Nutrients recommended. Reset felt worth it because I couldn’t find any res changes after Feb 6 in my notes, and I didn’t want to gamble this late in flower. Day 88 - Feb 22 (Flower Day 53) 00:10 pre top-off: pH 6.0 / EC 1.780 ~1 L consumed Post top-off: pH 6.0 / EC 1.894 (first reading likely off - meter acting a bit wonky again) PPFD noted around 790. Also: smell is getting more funky (in the good way). And importantly: she’s not “scarred” anymore - almost all previously damaged leaves have been trimmed away by now. Day 89 - Feb 23 (Flower Day 54) 00:10 pre top-off: pH 5.0 / EC 1.852 15 min post top-off: pH 5.58 / EC 1.724 pH came in low and got corrected with the top-off. Plant looks fine. No sign of new damage spreading. The trend stays: tops look “older,” but the mid/lower stacking is active. Day 90 - Feb 24 (Flower Day 55) 00:10 pre top-off: pH 5.56 / EC 1.874 ~1 L consumed 15 min post top-off: pH 5.67 / EC 1.724 Leaves praying. No taco. Everything feels stable and predictable right now - exactly what I want after the January chaos. Day 91 - Feb 25 (Flower Day 56) 00:10 pre top-off: pH 5.73 / EC 1.872 15 min post top-off: pH 5.80 / EC 1.786 Still holding that same EC band after top-offs. Some tip burn / slight leaf edge crisping visible on a few leaves, but nothing that’s escalating fast. Focus remains on bulking and resin rather than chasing white pistils on the very top tips. Thricomes look mostly clear with a few cloudy and no amber. Week 8 Notes / Takeaways Res change happened Feb 21 @ 01:00 (pH 5.78 / EC 1.752, ½ AN dose). EC after top-offs mostly sits ~1.7-1.8, which is consistent given ~800 EC tap water baseline. Smell turning stronger + funkier in a good way. Canopy damage from the old incident is largely a non-factor now - most of those leaves are gone. The “action” is in the mid/lower stacking and healthy sugar leaf resin production. I'm hoping for another 3 weeks of flower before harvest.

Great week all seemed to recover from transplant and lst! With new growth coming in No more signs of any knats either wich is awesome hopefully thats gone. Trying to keeping main branches at 10inches so i just lst them as needed DDS are way more resilient when it comes to training choco i dint have ti adjust much or many

well we are through the stretch and fully into the flower now. They look really nice, I hope I have enough P and K in the soil, I may need a Banana tea halfway through but only time will tell.

Hello Diary. The second week of flowering is behind us. I did a little defoliation this week, I honestly didn’t dare remove more leaves and branches, I didn’t know how they would react to it. Maybe I needed more? The temperature is still high, sometimes rising to 29, 30 degrees, but mostly around 28. Humidity in the air is an average of about 55% but sometimes rises to 60%. The problem is frequent rains this summer which creates high humidity in the air and this affects the humidity in the box as well. The flowers are developing nicely, and they have started to smell as well, but let the pictures speak for themselves. The plants are big for my conditions, the 120 x 60 box size is perhaps too small for three plants (two Hulkberries and one Green Gelato), so the real jungle is in the box. It’s already a challenge to take them out every week for a photo shoot, but I try to be as careful with them as possible. The Hulkberry has reached a height of 113 cm which is on the verge of acceptability. If it continues another ten cm, I’ll be in trouble because the lights can’t lift more than this. 18/07/2020. - Day 30. Defoliation. I removed the leaves at the very bottom of the plant to make it easier for me to water them, after that I watered the plants but this time I didn’t put BioBizz, I just watered them with clean water. 21/07/2020. - Day 33. Watering. This time I gave them BioBizz, on schedule for the second week of flowering. I also added CalMag 1.5ml / L, preventively. While they don’t show they’re missing anything, I’ll keep adding CalMag. 23/07/2020. - Day 35. Photography and height measurement. Hulkberry Auto # 1 - Day 35. - 97cm Hulkberry Auto # 2 - Day 35. - 113cm That’s all for this week, see you soon.

Shooting powder added to the tank and buds still swelling nicely. Looks like a great yield for under a weeks veg.

Fast Buds Run Lights at 50% and will start to increase intensity gradually this week until we reach 75% by the end of this week. Reverse Osmosis water with Base nutrients & additives will also be started this week,starting at half doses and increasing if need be. Bud Labs Advanced recipe from Advanced Nutrients will be used. 03/04/24 - 1L RO Water with nutes per plant. 05/04/24 - 1L RO Water with 1ml/L Cal-Mag Xtra per plant. 07/04/24 - 1L RO Water with nutes per plant. NOTES : 05/04/24 - Started some light LST on the main branch in preparation of using the scrog net in the coming weeks. 07/04/24 - Plants overall look happy and it seems that they have reacted well to the LST.

Day 67: My leaves are getting very crispy so i increased the watering of the garden today and hopefully that fixes the problem. Also the girls are still healing from not having cal mag for 2 weeks. Other than that they are growing well and as always if you have any tips or tricks please feel free to share. Thank you for looking and happy growing. 😀

The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had a high temperature of 85°F with sunny skies. I watered 3-5 gallons from the hose. Day 2 we had high temperature of 87°F with partly cloudy to cloudy skies. I watered 3-4 gallons from the hose. I added 100 ml of blood meal spread evenly across the top of the soil. Day 3 We had a high temperature of 85°F. It rained the previous night and intermittently raining and thunderstorms today. I did get these trained a little this morning. It's not the prettiest but I took some foliage off and opened them up by tying the branches to stakes arranged on the outside of the pots. I added 50ml plant tone and 50ml feather meal in top of the soil. The rain is watering today. Day 4 we had a high temperature of 73°F and all day rain. The rain was what remained of hurricane Beryl. There was a lot of wind up to 20 miles per hour. These girls handled it and loved the rain. Day 5 we had clear sunny skies and a high temperature of 85°F. I fed 150 ml feather meal and 45 ml Coop Poop. I watered 3-5 gallons from the water hose. Day 6 we had a high temperature of 86°F and partly cloudy skies. Plants #1 and #3 developed powdery mildew on their lower leaves. The #2 plant is showing immunity. I'm going to treat for the next 5 days with Arber organic biofungicide. I ran the fertilizer a little hot the girls are clawing and super dark green this evening. Day 7 we had a high temperature of 85 with partly cloudy skies. This week was a success. The girls added height and began flower. The powdery mildew that developed on #3 and #1 is minimal and only on the lower leaves. I'll remove these and try to get them a little more air flow. The girls have been so hungry now that they've gotten some size. The soil I used was recycled organic and had a lot of built up phosphorus from on my previous runs, which meant I couldn't add anything with phos as it would push them to lockout. It's finally playing out and I'm barely keeping these girls fed with enough nitrogen. The nitrogen I added actually had the leaves clawing about 6 hours after I added it. It wasn't bad and you can see on day 7, the girls were already back to business as usual. I finished topping these pots off with soil. The Sun plays a big part in my plants growth. There is very limited room with lots of morning and evening shade. That's why some of these were growing more on one side than the other. It's now changed direction and I've moved the plants to their permanent spot in the garden.

veg7 at 9/1/21

Going to pull her out of the light tonight and put her into darkness. Very happy with the way she turned out!!

Have to harvest in a few days. One of them doesn't smell like Runtz, but rather like lemon herbs and gout yogurt... I only know this from some Afghani landraces. Maybe it has something to do with the ruderalis part. 2nd and photoperis are runtzy🤤

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

3 Headies haben angefangen zu Schimmeln, ich hab sie dann sofort entfernt. Schade, aber ist ja noch n Haufen dran. Dann Daumen drücken und hoffen das die Pflanze die paar Tage noch übersteht. Ich habe den Luftentfeuchter aufgestellt!