Likes
Comments
Share
A couple days before chopping. Spotted budrot at 2 spots in the New 2. So almost time to cut before it get worse. The rest is doing fine, New 1 and Strawberry are gonna be the first ones to get chopped together,branches are under load and some are bending down
Likes
14
Share
@nonick123
Follow
Día 29 (10/02) Riego con 400 ml H2O RO Detecto una ligera deficiencia de Magnesio. Aplicación foliar de sales de Epsom a 2 g/L Día 30 (11/02) Riego con 400 ml H2O RO Día 31 (12/02) Riego con 400 ml H2O RO Día 32 (13/02) Riego con 500 ml H2O RO Está teniendo un stretch espectacular! Día 33 (14/02) Riego con 500 ml H2O RO Día 34 (15/02) Riego con 500 ml H2O RO Detecto unas ligeras manchas en las hojas de abanico más antiguas que parecen carencia de CalMag Voy a regar durante unos días con mezcla de H2O RO + H2O del grifo (Tap Water) con una resultante EC 0,45 Día 35 (16/02) Riego con 500 ml H2O EC 0,45 Khalifa Genetics - https://khalifagenetics.com/product/lemon-blanco-v3/ 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
4
Share
@Centollo
Follow
Día 15 de flora. Parece que no van a estirar mucho más. Todas sanas y felices. Ahora empieza lo bonito. Felices humos!!
Likes
9
Share
@Chef_LA
Follow
Die Pflanzen wachsen und sehen gut aus. Habe sie heute im unteren Drittel stark entlaubt und LST angewendet. Jetzt dürfen sie sich eine Woche erholen dann leite ich langsam die Blüte ein. Gedüngt wie immer nach Herstellerangabe.
Likes
2
Share
Likes
1
Share
Starting to take shape for the main branches cut at 3 nodes
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
44
Share
@Miketama
Follow
Harvest day! Cut her down at day 73 from seed. 170g wet off one plant, not a heavy yielder, but this particular pheno just grew that way. Buds are super compact, stacked calyxes, minimal sugar leaves, honestly a pleasure to trim. Smell is floral but complex and hard to pin down, not a typical profile. Can’t wait to see what she’s like after cure. ✂️🌸
Likes
13
Share
Struggling with RH, tent is too crowded bc I have lots of negative pressure, tent is bowing in hard. The best I can get down to is 50%RH, however I have tons of circulation. Look at video. I put a dehumidifier in the lung room. Rh drops if I open window, but its raining. Too wet outside rn. It went from blizzard (dry) to rain for 7 days now, maybe thats why Im struggling. Need circulation in lung room too. Vents open, still struggle, tent door open, im fine. And I use blackout curtains so no light penetrates the room. It maintain complete darkness 24/7. Plants sleep when i sleep, so never worried about it. My house was built in 1952 post WWll, so no insulation, just straight brick and a solid slab. That means it will hold moisture. Lung room at 35% RH. Rearranged set up. Trichomes...... 70% clear, 20-25%% cloudy, 5% amber
Likes
7
Share
@PotCasso
Follow
Week 7 Flower Full Bloom Watered in at 700ml Epsom Salt 2tbs to 4l - bought at the local pharmacy.
Likes
11
Share
3 semana ya de este primer sog de disfintas geneticas, creo que han cumplido con las expectativas, cubriendo el espacio y agarrando una buena estructura
Likes
16
Share
Aug 31: Overdose is doing fine and is now five weeks into flowering (or a week behind my two big photoperiods). I broke one of the main stems about a week after topping so it has a weird shape but there are lots of good bud sites so she’ll be fine. Shorter veg time than my two big photoperiod plants and only topped once because I was expecting an auto not a photoperiod plant. If it’s Overdose Fast I’m cool with that as I’ve decided that I prefer fast photos to autos which are more sensitive to setbacks and generally trickier to deal with at large scale. Sep 2: strong plant with lots of buds. Sep 4: adding some potassium silicate every couple days lately while watering.
Likes
47
Share
Going great. Really seeing the p/k boost kicking in. Flowers stacking and growing in girth. This is far more important than length, ask my wife. It’s true. Really. Anyway it’s good.
Processing
Likes
3
Share
@El3vated
Follow
This week I transplanted directly into a 5 gallon pot. It looks like there was a little stress after transplanting. It went from a nice green to a yellowish green. This one also started stretching so I lowered the light. Im going to add aminos this week and hope it can bounce back nicely.
Likes
1
Share
The tale of one strain but two different grows. Plant a is looking she she is ready to be harvested. I'm going to give her another week or two just to get the tricone a little more amber about less then 5% Plant b is looks healthy and is getting thick I am probably going to give it another 3 week cause alot of tricones are not cloudy about 50 to 60% is cloudy will wait till 90-100% is cloudy
Processing
Likes
23
Share
* ********* Week 11 - June 20 to 26, 2020 - Days 71 to 77 from germination *********** * It is the end of flush week and she went into darkness on Wednesday night, day 75, for two days. Saturday will be harvest day and start and the dry process👍 She has certainly been going through the beautiful stage of senescence and her fade is gorgeous. The purples and yellows coming out are great......covers up the brown spots😂😂 Her buds are densing this week as we work on bring down the humidity. Running in the mid 60’s for humidity late in flower is a different experience and one that takes some getting used to. Bring down further to low 50’s has really helped to bring out her frost as well. Kept the humidity high to form big buds......now lowering to make them more sticky👍👍 I am feeling very strongly that the big part of the pH issues this run was a change in feed water. I have always used bottled RO water for all my grows, except outdoors, but this grow I switched to tap water. Dechlorinated the water with air stone and gave it 24 hours min before using. Wanted to save some money and tired of lugging bottles downstairs a couple of times a week☹️ This is worked out nicely and a lot more convenient. However, the city must be putting some crap in the water that is causing issues in my media and raises the pH after the watering. Out of the tap it is 8.4pH and 275ppm. Since ppm were not too bad in my opinion I moved forward without filtering the water.......oops🤬🤬🤬 Out of options on what is causing the issue, I switched back to RO water late last week........all the girls are happier!!!! F......missed the cause for weeks. Always learning from this plant and my own mistakes to get better every run😉👍 Also wanted to add a little more stress to girl to help push out some increased resin. I drilled a 5/16” hole into the main stem to cause her stress. I did this rather than trying to break a branch and will see how it goes this run. Sterilized a new bit in Alcohol and went for it. They went into darkness about a couple of hours later. Excited to see what happens when she comes out to get chopped😃😃 Little more detail...... June 20/20 - Day 71 - Rezin and Liquid Weight @ 2ml/L = 285ppm and 4.0ph - 8L given to get a good flush - Runoff in pots already were 7.8pH and 485ppm. - after 8L water runoff was 7.0pH and 370ppm. - she is 29” tall and 30” wide. - tricombs still mainly cloudy.....review again in couple of days. June 21/20 - Day 72 - Dry out day - buds are firming up......squeezed a couple🧐 - temps are nice outside so tent able to hold 75 degrees and 51% humidity. June 22/20 - Day 73 - Rezin @ 1ml/L = 120ppm and pH the water to 2.7!!!!!!!!! - Given 2L watering. - No runoff water and I am good with that as I want the low pH water to stay in the medium. - She will be ready soon. Thinking darkness on Wednesday and harvest on Saturday?? June 23/20 - Day 74 - 2L plain water feed - 80ppm and pH to 2.4!!!!!! - not excited about these crazy low pH numbers but doing what we can - her tops are getting really pointy now and her leaves are very yellow. - checking tricombs, I think we are done and tomorrow will be her last day so that I can take down on Saturday. June 24/20 - Day 75 - 2L plain water feed - 80ppm and pH to 3.0 - Going into darkness tonight so this was her last bit of moisture. - drilled a hole into the stem.....was going to do a couple of holes but not trying this method before I decided to leave it with one hole. - into darkness tonight So we finish up the week with her in the dark. Next update will be the harvest!! Thanks very much for taking the time to review my diary!! Sorry for running behind often on this run.........everyone has had a busy life the last couple of months in the world and its been no different here...........a huge Kudos to all the Growmie‘s that are able to keep up with their diaries on daily basis on GrowDiaries.......its a commitment😃👍👍 Mephisto has bread a very nice girl. She is big and sticky and grown very well considering the environment she has been given. Battling the high pH and still turning out as she has is awesome and much respect!!!! Great job Mephisto, can’t wait to run her again.......just so happens I have several more seeds of her😃👍
Likes
8
Share
@Roberts
Follow
Fast version A is doing good. She is vegging nicely. Maturity signs should be showing up soon. Everything is looking good. Thank you Dutch Passion, SSSC, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
3
Share
July 5: Tropicana Cookies FF is very nicely symmetric and fast growing. She’s on schedule and doing great. One more week of veg and then I will start force flowering on July 11. July 7: grew 3+ inches in two days.
Likes
6
Share