Processing
Likes
Comments
Share
@PoppaMac
Follow
This week has been pretty good. Humidifier died on Sunday, picked up a new one and the temp rose to 79. Plant wilted for the first 8 hours or so and then settled into her new environment. She is sitting in a RDWC with a Liberty Haze that needed to get more nutes, so I bumped the nutes up to 600 ppm. She hasn’t missed a beat. So far this strain hasn’t given me any problems whatsoever. Knock on wood it stays that way! Slight smell coming off of her, no particular notes, just a plant smell. 4 nodes in and the 5th is sprouting. I’ll be topping and training soon!
Likes
37
Share
@MG2009
Follow
Happy gardening. 07/21/2018 Wow unseasonably cold last night got down to 48° brrrr. No signs that the cold bothered the girls posting photos in a min.. And video. Phew took me awhile to upload. 07/24/2018 Mid week update Back to hot and, steamy summer weather. #1, tops are just about 39.5", going to try to get all super cropped to about 30", I expect that they will be double their size at harvest.👍. On a side note hours of light will soon be at 14.5 hope they initiate flowering,as it will give me almost 3 months of flower!👊 #2 is 43.5" looking like a Christmas tree,still some supercropping to spread out the lower layers. #3, is 35.5" And no training just picking her dead,yellowing leaves #4, is 41.5" also no training #5, is 30" , and still stinkiest 😎 of all gonna take a clone today.
Likes
14
Share
@Chubbs
Follow
This week has been wild. I had to cut the sides of the greenhouse as the plants had it bursting at the seams. These girls are all flowering beautifully and starting to frost up. Happy Growing.
Likes
24
Share
@Seedler
Follow
i used a low dose because for my plants even half strength is often too much, this saves nutrients tho. Around 825ppm, 18 DLI, Ph 6-6,25 thanks to FastBuds and Terra Power!
Likes
9
Share
It starts to be pretty and frosty One is beautiful, 2 are nice and one looks tired :(
Likes
27
Share
@Salokin
Follow
First off, this is my first time trying cuttings. I read an article about monster cropping and decided to give it a try. The cuttings were taken roughly 3-4 weeks ago from the Glookies in my other diary. Strangely enough all of them made it and even after giving some away, I ended up with six. I decided to transplant 3 of them onto bigger cubes and will choose which one will make it into the flower tent in 2-3 weeks. The other three I will try to turn into little bonsai glookies and tack them separately. The two plants on the very right have already been topped, as I didn't like the growth (they started to stretch weirdly), however all 3 of them should end up with 6-8 main colas if I don't top any further. I plan to scrooge the winner at around 30 cm when put into the big tent. my last one stretched around 25 cm when I flipped her so this time I should be able to even the canopy a bit better. Stay tuned :)
Likes
26
Share
https://youtu.be/YrTZFTFr3tw Grow went well with no hiccups I took some clones and will definitely growing these strains again as I feel I can push them a lil bit more
Processing
Likes
8
Share
Impresionante, mirad que flores se están formando aquí , Zambezaseeds si a echo un buen trabajo con estas candy caramelo version fast flowering. 6 semanas de floración y ya no queda casi para cosechar, Añadi esta semana overdrive y retire big bud de advanced nutrients. Las flores no son muy grandes pero si se ven flores muy compactas y con mucha resina. Ph controlado 6.2 , humedad entorno al 50% y temperatura media de 26.5 grados, que cara al verano no está mal. Todas estas flores fueron logradas gracias a una buena iluminación (ts-600 mars hydro) y vaya resultados. Estas semanas sigo actualizándoos todo , sin más novedades me despido, un saludo fumetillas y buenos humazooos 💨💨💨
Likes
7
Share
Hello everyone. Another week passed, gave her water and some enzimes on day 33, I noticed some leaf intervenal discoloration, not too concerning in my opinion. Maybe the enzimes were too much or some nutrient lock out due to a somewhat excessive fertilization. Any opinion on this issue? I think will go on with plain water to the end I think, hoping the problem will sort out itself. What do you think? Other then that I think buds oare forming fast and fine, she's putting out a little resin and smell now. Ciao 😊
Likes
9
Share
@710Lino
Follow
DONT MIND THE COMMENTARY THIS WAS A SNAP CHAT VIDEO I REPOSTED 😆😆😆😆😆
Likes
3
Share
@Xabii
Follow
Bulking is in progress, nothing else to report, just waiting. Values are average of the day. DATE - EC(µS/cm) 20250419 1894 20250420 1894 20250421 1911 20250422 1942 20250423 1967 20250424 1979 20250425 2022 DATE - PH 20250419 6.16 20250420 6.13 20250421 6.12 20250422 6.12 20250423 6.12 20250424 6.14 20250425 6.13 DATE - ORP (mV) 20250419 74 20250420 70 20250421 66 20250422 63 20250423 65 20250424 64 20250425 59 DATE - °C - RH% (Tent Temp/RH) 20250419 23.6 49 20250420 24.2 53 20250421 23.6 52 20250422 23.9 52 20250423 23.8 52 20250424 23.1 52 20250425 22.4 53 DATE - °C (Reservoir) 20250419 20.7 20250420 21.2 20250421 21.0 20250422 21.0 20250423 20.9 20250424 20.8 20250425 20.6 DATE - CF 20250419 18.94 20250420 18.94 20250421 19.11 20250422 19.42 20250423 19.67 20250424 19.79 20250425 20.25
Likes
55
Share
2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.
Likes
46
Share
Hello growers and tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 It's my first harvest on this community and I'm loving it. Everyone always ready to help each other and have great feedback. Tracking my grow on here has made it way easier. There were times that I misplaced notes or forgot what I did or when with a certain strain and all I had to do was come on here and check it. Also motivated me take more pictures and do more logs. All out great site. Don't know how I haven't found it earlier. HIGHLY recommend for all growers. The grow cycle went pretty smooth. She's easy to grow and flowers early so you can't do much training. That being said it's great for beginners. 👌 Had no problems with pests on these, while on the other plants (none cannabis) in the balcony I had issues with spider mites. They grew better than expected given the few hours of direct sunlight they received. Results were good, I was expecting 10-15 grams per plant and ended up with a tad bit more. Drying went a bit fast because there were few buds. I probably could have took it down a few degrees as well.. my fault on that part. They dried in 4 days, they've been curing for 10 days. I normally test them after 15 days but they smelled so good I had to try them. Smell: Lovely earthy, woody, slightly like diesel. Quite pungent for being autos. Taste: Just as it smells.. leaving a nice after taste of diesel. Touch: Very sticky, dense buds. They break down finely in the grinder. Cleaned the grinder before testing and after 4 joints ( 2 grams or so) I already have a good amount of kief collected in the bottom. (Check photo) Might grow this one again just to make some bubble hash. The high is awesome nice uplifting, long lasting energetic but without a heavy euphoric rush. Reminds me of a smooth haze high, although if you smoke a lot even being an experienced smoker, she'll get to you. Only down side is dry mouth, very dry mouth! Have some water on hand because your mouth will transform into a desert. 😂 Great strain to kick start the day. Beginner smokers take it easy with this one. She hits hard! 👊
Likes
6
Share
Flowering day 42 since time change to 12/12 h . Hey guys :-) A lot happened this week :-). The buds develop really nicely . The scent wafts through the whole room when I open the tent 💚. This week was poured 3 times with 1 l each (nutrients see table above) This week there was the maximum amount of fertilizer, which will be slowly reduced from next week :-) . Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Strain at https://pcg.international/shop/pcg-int/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
7
Share
Still feeding nutes plant decided it wants to extract stored energy from fan leafs that's fine that why I left some. I won't be doing a full flush. Amber trichomes are appearing on oldest trichome locations so one more week and that's it.
Likes
117
Share
Hello everyone. sisters and brothers gardeners! You missed me? here I am for you in a new explosion of colors in my contents .... I hope you like them holy god .... how much glue I see on those fantastic shoots feel free to leave any comments or questions. the best harvests at all
Likes
12
Share
Off to the races after the first week of veg. And the girls are looking good. They had about 24-48 hours of transplant shock but have since turned over and look perky. They never fully transitioned and all of em look like they’re turning back around. Definitely starting to see some pheno variation on one of the indicas (F6) - trademark from the Skywalker 100%. A light bluish/purpleish hue on the fan leaves. We’ll see what happens over the next week then probably just pick a day and flip. We don’t need em huge - just big enough to show off dem buds. On the hardware side of this grow, the mods to the dutchy system look to be working well. It just makes plant management easier with a full trough drain as opposed to individual drainage holes. Really, the system isn’t a concern for the most part. It’s proven time and time again how manageable a recirc system can truly be. Scaling down to smaller pots and more plants has also been a revelation of sorts around here. We used to grow monsters and now the aim is strictly proportional yields across a wider array of genetics. Been a great trip so far🤟. Couple more boring weeks of veg. And as soon as the breeding tent is cleaned up and pollen free - it’s go for blast-off👍. Background This cycle of clones represents all the potential of this F1 line of WalkerBerry OG. Bred by myself over the last couple of years. This genetic shows excellent hybrid vigour, incredibly stable nutrition requirements to date and an eclectic mix of long and short internodal spacing bu specimen. We know we have indica and sativa dominant traits spread evenly across the 6 available clones. Now it’s just a matter of seeing them run out under controlled and pollen free conditions. We’ve labelled each plant and it’s resulting seed accordingly. Once we get to the F2 run, we’ll hopefully be able to isolate down to 2-3 phenos if the bud is any good. From there, who knows. It’d be great to get to a finished, stable generation that would be fem worthy but that could be a very long way off. For now - we’ll focus on this line and see where it goes🤞🤞.
Processing
Likes
16
Share
Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Finally got that transpant done. Added a bit of root juice to help out the transplant. Won't be adding nutes until next week, directly bloom nutes.. Took waaaay to long to transplant. They didn't get any growth becuase of the bad weather these past weeks. Very bummed out about that. Two of the are already in prefower.. the tiniest i hope grows a bit more.. can't really ask for much more given the bad weather and that they're autos.. I'll for sure be doing a re run with this strain with better stable conditions. Take care out there! One love!