End of Week 15 (8th week of flower) Still cruising, everything has been running very smoothly and the smell is just undoubtedly off the charts. The ladies are showing off some colour and are fading naturally bringing out hues of orange and purple. I also noticed that the leaves and buds closest to the lights are showing significantly more colour that the ones that are further away. The colas are also getting heavy and there are some side colas that are hanging and needed to be reinforced to keep them upright. (This is a good thing obviously) I know I said I would start the flush (not giving any more nutrients/top-ups) but I decided to give them a small dose of Boom Bloom just to give the ladies that final boost. I boosted them in the middle of the week and the flush has begun after that. Only water from now until harvest. Pest Report: None Smell Report: HEAVEN

Be done very soon

Vale pues hoy empiezo a contar la primera semana de crecimiento, de un total de 4. Estamos a 13/02/23 y llevan 20 días desde la germinación. Hoy he regado ya con abono de crecimiento, en concreto uso el Boom Crecimiento de Boom nutrients y he añadido también CalMag Dentro de dos semanas haremos el trasplante, a ver si aguantan por que a este ritmo se van a salir de las macetas en 1 semana jaja. Os dejo un video también de una visión aérea con mi dron. Hola. Actualización de semana 19/02/23 Efectivamente como dije hace 7 días. Toca trasplante, han crecido muchísimo y es momento de que las raíces sigan creciendo con fuerza así que... trasplante. Entre el día 19/02/23 y el día 20/02/23 termino todo el trasplante, por ahora dejo terminadas 5 de 12 plantas. Especialmente he priorizado las autos ya que no me quiero esperar a trasplantar para que no entren en flora. Por ahora siguen vegetando y trasplantas! ESO ES!

3rd jan 2025 The seeds arrived I right away let it sit in a glass of purified water over night while prepare a soil 4th jan 2025 Put seed in a cup of pre-mixed soil 6th jan 2025 Clearly Germination visible on both At this moment i do not have any gear even a tent or proper grow light and nutrients solution. only with 80w 169led 15*15cm led grow light so i let them grow in a diy modded grow box and purified water

~FastBuds Tropicana Cookies~ This was my first time running this FastBuds strain, along with my first attempt at 'hydroponic' growing using the AirCube Active Oxygen Ebb/Flow System from GrowAce. I cultivated three plants from seed to finish in just over 70 days growing in a 70/30 Coco/Perlite mix coupled with a layer of straight Perlite in the bottom of the fabric pots to ensure drainage and fed Plagron nutrients for the entire run with the exception of a 10 day flush at the end. Among those three cultivars, I had three distinctly different phenotypes. The #1 plant grew short and extremely bushy, with beautiful thick purple flowers, showing more Indica like traits. The #2 plant, which was the only one of the three that was topped, stretched her 'legs' and grew fairly tall in comparison to the #1. She also lacked the deep purple coloration of the #1, having just hints of light lavender in her flowers which were stacked tightly and completely frosted over with glistening trichomes! Lastly, the #3 phenotype grew the tallest of the bunch with wide, 'Sativa-like', node spacing. She was the one that experienced several issues during the grow, but finished out not looking too bad with a super dark purple coloration to her flowers that almost appears black. That dark purple color, coupled with her dark orange pistils give her flowers extra eye appeal! FastBuds Tropicana Cookies Auto was a very easy to cultivate strain and produced really spectacular results all things considered. I'll definitely be looking forward to running this one again in a 100% organic grow and can't wait to the results from that! 😎👍 Now let me move on the the AirCube Active Oxygen Ebb/Flow System from GrowAce. I was sponsored this system in return for my feedback on it shared through my Social Media accounts. On paper, this looks like a really great product, and I'm sure with enough time and experience you could get optimal results from using it, but for me that just was not the case. The initial setup went very smoothly, GrowAce's AirCube System looks to be extremely well made, comes with fairly clear instructions, and went together easily. I did add hose clamps to all the fittings attached to hoses for an extra measure of insurance against leaks (no one needs 20+gallons flooding the grow room!) and also placed the reservoir and 'brain bucket' outside of my 4x4 which allowed me to place all six AirCube pots in the tent, and yes it ended up being a bit too tight for me... it probably would work better with 3 plants or less in a 4x4. So lets get in to my pluses and minuses in my opinion for the GrowAce AirCube Active Oxygen Ebb/Flow System: Positives: • Well made • Easy to assemble • Easy to understand instructions and lots of 'how to' media available • Easily expandable Negatives: • Not for novices, previous hydroponic growing experience needed • No way to control solution temperature in reservoir • Roots growing out of the fabric pots end up dying and rotting which results in a ton of debris in the solution necessitating draining/cleaning/refilling the system every 4-5 days • No way to adjust nutrient levels for individual plants, they all get the same PPM like it or not. • Requires having all plants start together, and finish together as there is no way to flush individual plants. • Lastly, I like to turn my plants, which is impossible and also to photograph them which is difficult with this setup. All in all, I enjoyed the experience of 'hydro' growing, but am ready to get back to what I really LOVE to do which is 100% organic grows... Stay tuned fam!

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil to be spread evenly on top of the soil. Day 1 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 2 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 3 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I removed leaves with powdery mildew and treated with Arber. Day 4 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I finally got most of the infected leaves off. I treated with Arber again today. Day 5 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide but it's hasn't had much affect, except on #1. I stripped all the infected leaves. I'll treat these tomorrow with growers ally fungicide. That should clear them up. Day 6 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. Day 7 we had a high temperature of 84°F. We had intermittent storms and showers throughout the day that took care of the watering. This week was a success. The weather has been terrible for cannabis, but these girls are thriving. I had to treat with Arber biofungicide and then Growers Ally fungicide(both organic).It cleared up the powdery mildew and these girls are ripping.

I used half the recommended dose of Indo products for each plant through this grow. The video quality gets better as i upgraded phone sometime soon. The monkey juice is half recommended making it every week rather than full dose every two. The sticky bandit was fed with it every week at half dose till later on.

Through week 2 of the stretch and it’s a bloody mess of super crops with about 8”of headroom to the lights.😂. Bit of a disaster definitely suggests a need to lower the table height slightly. My own errogance wins again. I know better than not to top or fim under these conditions, just figured we’d get better control on an extremely short veg. Cycle. Wayyy off there lol. Still another stretch week to go which means they’ll be more cropping to follow with it as well. Is what it is and we’ll have to make due. No issues with the plants whatsoever yet👍. Background This cycle of clones represents all the potential of this F1 line of WalkerBerry OG. Bred by myself over the last couple of years. This genetic shows excellent hybrid vigour, incredibly stable nutrition requirements to date and an eclectic mix of long and short internodal spacing bu specimen. We know we have indica and sativa dominant traits spread evenly across the 6 available clones. Now it’s just a matter of seeing them run out under controlled and pollen free conditions. We’ve labelled each plant and it’s resulting seed accordingly. Once we get to the F2 run, we’ll hopefully be able to isolate down to 2-3 phenos if the bud is any good. From there, who knows. It’d be great to get to a finished, stable generation that would be fem worthy but that could be a very long way off. For now - we’ll focus on this line and see where it goes🤞🤞.

She started looking good after 3 days of stalled growth. Thanks to the growmieverse for the encouraging words while I worried something wasn't quite right. Still a modest RH concern (high 30s is ok, wishing for 50). Cool mist humidifier may be in order.

15 Day dry then trimmed using the Trim Bin. Curing with Grove bags, first harvest filled 3, 1/4lb grove bags. *Updating with clone pictures of this pheno in late flower labeled in diary as you look through, If I pop a new seed of this strain Ill start another diary

Diesmal habe ich mich dazu entschieden nur die Sonnensegel rauszuschneiden und die Zuckerblätter zum trocken an der Pflanze zu lassen. Vom ersten Eindruck her, ist der grow sehr gut verlaufen. Die Bude sind Fett und mit Trichomen überzogen.. Freue mich schon aufs Trimjail. Nach 14 Tagen Trocknen habe ich mich an den Feinschnitt gewagt. Von den zwei Pflanzen konnte ich 155g feste dicke Buds und 110g Trim ernten. Die Buds sind zum curen in einen Cvault mit einem Boveda Pack (67g 58%) gekommen.

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

What a great strain...definitely surprised me positively. Thank you Exotic Seeds for the opportunity to work with you trying this awsome plant. It has a steady growth, kinda short and bushy like a lot of plants with strong indica traits Very dense buds, big ones, fat and resinous. With a LOT of productions all-over the plant. So much thricome production it sparkles white. Cutes it yesterday (17/12/2023) altough on my opinion it could have 1 more week. Altough because of the huge problem I had to do it. This grow tent (specially the other plant growing side by side) had a mold issue, bud rot spreading fast. I must have lost about 5 65 grams of wet flower total on the Fat Banana. When I cuted it 🍓 Strawberry Cola weighted 829 grams it has a lot of defoliation done alredy but I'll trim it 100% when dry. This is it, thank you all of you growmies for watching this grow. See u guys on the next one.

She has performed very good with the lst method, nice plant, fast growth, quality flowers, it's a very good choice for everyone who's looking for a good quality strain at affordable prices. Very nice genetic, this phenotype concretely has a very sweet and floral terps. You can check the other 2 phenos of ak420 here at my page

Flowering day 44 since time change to 12 / 12 h Hey guys :-) The buds are becoming incredibly beautiful and smelling better and better ☺️. Today there was again the full load of food and will be slowly driven down as soon as it comes to an end :-) Was watered 3 times a week with 1.2 l each (nutrients see table above) Otherwise everything was cleaned. Have fun and stay healthy 💚💚💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

What up grow fam. Week 3 up on these girls. At the moment they're a little upset with me. I went away for a few days so I over watered hoping they'd be alive when I return. They're still alive but sure upset and showing it. I did a defoliation taking the bigger fan leafs off to allow some more light to the lower branches. Also I don't usually put them under full power of my light until about week 5 but I did to see how they'd do and though they're stacking super tight, I think I probably did more harm then good. I'll baby them and see if they'll bounce back. All in all Happy Growing

From the first days of flowering, I immediately saw that this strain had potential in terms of the rapid development of lots of smell trichomes.. ~ Hope better every day ❤️

Last week. Dropping temps and a good drench with plain water. We shall see.