Tolle Pflanze die so gut wie keine Probleme gemacht hat. Bei rel. Luftfeuchte von 35-40% unter anderem aus Angst vor Schimmel war auf einigen Sonnensegeln Mehltau zu finden durch regelmäßiges absammeln der Blätter aber kein Problem.

Müsste die 11 Woche sein, denkt ihr hier passiert noch was? Würde zum Wochenende hin ernten oder noch etwas warten ? Die großen Sonnensegel sehen noch so fit aus und generell noch sehr viel xhlorophyl vorhanden, lieber noch eine ganze Woche warten? Gedüngt wird nicht mehr nur ordentlich mit Wasser gespült bis es unten raus läuft

Hello. This is the end of week 9 and the beginning of week 10 of veg. Quite week for the plants and us. It's above freezing now, but it's one storm after another here. The plants are dong well and I'll turn over to flowering next week. I'll make clones at that time. I'm after the best plant so I'll whittle the 14 plants down to 1 or 2 plants when I'm done. But I have to take 3 clones of each to be sure I get 1 to regrow when it's done. So I'll be doing that this week. My next trim/prune will be before the 3 week of flowering, before the resin starts to flow. Through this veg I've been giving a full feeding and then just watering and then a full feeding and then just watering.... You get the idea... I let the pots dry and hopefully water/feed before I get any wilting. We've started a new Freak Bros. book. Comic Book #10 Published in 1987. It's the 3rd in the trilogy. You'll find the first 2 comic books in the story in other diaries. Have a look around in my other diaries and you'll find them. OK. Have fun out there. Chuck

Day 32 she’s exploded and the lady I was most excited to get going. I mean who doesn’t love a Russian 👌🏻 Can’t wait to watch her grow. She took very well to the leaf tucking and loving touches.

This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 19.10.25 VW26 it just became a one plant diary, keeping #5, #6 gets it's own diary for testing nutrients. 20.10.25 VW26(?) Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 25.10.25 VW26 I'll be repoting tomorrow, 26.10.25 VW27 rest in the video📹 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 25.10.25 VW26 – Fed 5l of #1 → 2l runoff 26.10.25 VW27 -- Fed 3l of #1→ 1l runoff 27.10.25 VW27 -- Fed 3l of #1→ 1l runoff 28.10.25 VW27 -- no feed no water 29.10.25 VW27 -- Fed 5l of #1→ 2l runoff 30.10.25 VW27 -- Fed 5l of #1→ 2l runoff 31.10.25 VW27 -- no feed no water 01.11.25 VW27 -- no feed no water (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new batch): 30 → 60 ml = 1.00 → 2.00 ml/L 🍶 Calcium Nitrate (Calcinit): 3 g ≈ 15 ppm N + 10 ppm Ca 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: ≈ 160 ml liquids + 3 g solids per 30 L = ~6.0 ml/L active mix 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

I’m in love with the straw gorilla 😍🤩🍓 All the top buds ready✂️ The colors & the smell pouaaah out of this world !! One more week for the lower buds and finito bye bye

Day 56 - CM is super fat, frosty & extremely dank smelling! The gorilla girl still hasn’t got any bigger but is definitely smelling strong. Very curious to see how they smoke! Make sure to check back for more updates, thanks for following & happy growing friends!🙏🏼🌱✌️🏼

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""

3/18 Week 12 Day 34/Flower Have a Norto virus in the house so being brief All looks good no changes at this time waiting on buds to say when 3/19 Day 35/F Lot happened overnight, looking like end of week for flush. Will continue PK for one more day as time for the last push here now as upped nuets about 200ppm. PK ends Friday, nuets will drop back 200ppm at the same time. Flush begins 3/24 Tuesday... 08:05 PDT ... 😏 3/21 Day 37/F Pics Some foxtailing began today but heat is ok so no worries, its all bud. Stopped the PK booster and reduced nuets to get ready for flush next week. She will go over a few days (46 -42=4) but its all good. 3/22 D38/F Pics Tricones all milky white and full Flush Tuesday Last feed Monday at half strength 3/23 D39/F Last feeding at half strength but tossed in a dose of Recharge just to see if it matters. doubt it would but it needed using as it hitting its effective date. Flush begins tomorrow morning 3/24 D40/F Flushed using 10 gallons PHed tap water and 5ml/gal flushing agent. Pic and vid

8/17 Watered everything but the 50. Found two leaves with sep markings on the pink kish in the 50. Definitely not using old soil again. I'm pretty sure THIS plant contracted it from the soil and not the way the others did with the lawn mower and birdseed hijinx. It's supposed to rain for the first time basically all summer. It's am 80% chance so I HELD OFF ON PLANT DOCTOR AND DID NOT APPLY as I'm supposed to have a clear day after. I'll apply the plant doctor in the morning. I'm hoping this rain will knock down a bunch of those thrips. They seem to be on a small branch on a plant or two. One or two leaves show damage and I'll pick them off. I figure I'll get them after I apply plant doctor. I'll use either citric acid or just my regular bt-k pillar treatment with Castille or liquid soap. That will kill them as well. I'm on really worried about it. I also might just buy a bunch of lady bugs and unleash them once things get further along. EDIT: TOOK A QUICK VIDEO AND A COUPLE PICS. HOPEFULLY WE GET THIS RAIN. IF NOT IM GOING TO TREAT THE THRIPS THAT ARE ON TWO PLANTS NOW. I THINK IM GOING TO GO WITH BT-K FOR NY PILLARS AND HOPE THAT THE DISH SOAP IN THE MIX KILLS THE THRIPS. I HAVE LOTS OF DIFFERENT OPTIONS SO ILL FIGURE SOMETHING OUT. BUDS SEEM TO BE EXPLODING IN GROWTH. OH AND THANKS TO THE OUTDOOR GROWER THAT MESSAGED OFFERING TO HELP. I APPRECIATE THAT. THANKS. 8/18 We got the rain we were expecting. It was sheet rain for a few hourscand rained during the night. Everything was drenched and it was cold (50°F). I shook off the special kush that's way further in flower. I decided to use the leafblowrr despite the risk of spreading anything. I did it so that it wasn't ever blowing TOWARDS another plant but still. I was hoping it might blast off some thrips that might have survived that torrential rain. We've never had a dry summer like this. I'll moniter things. My water day is tomorrow so I assume that's when the girls will get their plant doctor dose. It's a great time of year for cannabis growers. We get to watch all the hard work we've put in literally pay off. It's very peaceful in the garden. EDIT: Went over at about one to check things out and do some minor defoliation. I checked on the thrip situation and I dont know if I blasted them off with the leafblower or if the rain washed them away bit I doubt it. Ivecmade the decision to treat these little bastards. It's on one plant but it's started to spread to another branch on another plant. I probably just overlooked it but still. Seeing that it rained like he'll and I'm seeing like zero signs of septoria I'm going to treat everything. At least I think I am. I haven't decided what to use. I think I could just use bt and soap and I'd probably be alright. I'd feel better doing that as it's something I'm familiar with. Outdoor growing. It's always something. 8/19 In the 40's last night. Hopefully that will help with the thrips. I was hurried and since today tops at 72° I only watered the 10th planet big mk ultra and the chem dog with preventative plant doctor. I'm not seeing hardly any septoria and if I do itsca random leaf. I mixed up 3tsp of citric acid and some Dawn in a 2 quart hand sprayer and treated the 10th planet that I thought had heat stress and the Pink kush in the ten gal that has the damage. I also treated a branch on my good tenth planet. It was the only branch with markings so I think I've got it early enough. I'm just wondering the best way to tackle this. The pink kush I'm sure, could handle spinosad. That strain is much later flowering. I'll see how the citriccacid works and go from there. If the other girls need water they'll get it when I get home alongcwith plant doctor. I've got some work to do. I'll keep this updated. Opinions are always welcome.

Plant is looking good and healthy, starting to develop good roots rapidly and is now fully in the veg stage, Rhizotonic is working great as far as I can see and Canna start looks the job, I have Canna A&B for later but after studying reviews etc Ice gone for Canna start for the first 3 weeks and then on to the A&B later as it comes into flower, Plant has grown 4 inches or more the last few days and is now 8-9 inch tall with nice lush green leaves, I'm increasing nutes and supplements and have introduced calmag at a 1/7 recommended dosage I don't want to stress the plant at this early stage, I've decreased the reservoir level since last week to about 1.5 inches under the net cup as the roots and hairs are developing well and want to give them some air as they grow further into the reservoir Pump on 24/7 Ph in reservoir is slightly decreased to 6.0-6.1 PPM around 250-300 will increase next week

Week 7, the smell is super strong and the nuggs are hard as rocks, they are not too big they needed more P and i failed to supply it at the right time thats totally my fault but they suerly are more beautiful each day that passes, im glad they are good

Aufgrund ihrer Größe sind sie sehr nah an der lampe dran und haben dementsprechend auch verbrennungen.Ich habe sie nun etwas höher gehangen.P3 hat schon weiße Härchen gezeigt und ich weiß nicht ob sie nun schon beginnt mit Blühen. Ich habe sie heute mal in die sonne gestellt,doch das haben P1 und P4 nicht so gut vertragen.Von P3 ist bereits der Steckling angewurzelt,somit kann ich die Mutterpflanze in den nächsten Tagen in die Blüte schicken.

Hallo zusammen 🤙 Sie wächst sehr schön und macht keine Probleme

2017-09-11. Kl 12.00. Week 3 starts. I have cleaned the whole room for the new week and gave the girls water and nutes. Added videos and pics. Girl is 11 cm high. --------------------------------------------------------------------------------------------------------- 2017-09-12. Kl 10.00. New pics and video. -------------------------------------------------------- 2017-09-13. Kl 22.00. Added new video. ---------------------------------------------------- 2017-09-15. KL 10.00. New pics and video. The girl is 14 cm high. --------------------------------------------------------------------------- 2017-09-16. Kl 10.00. The girl is starting to grow little better now and i hope she is picking up the pace. Added new videos.

Hey Abby and SeedSupreme NYC Diesel Auto W3 10/5-11 Day 17-21 First time adding nutrients to feeding: PH 5.74, PPM 574, EC 1146,Temp 64.2 480 ml plus spray around the rim of the pot to wet the outer soil. Aptus regulator 1.5ml/2.5 gals (10ltr) Aptus Starter Booster 2.5ml/2.5 gals Grow Time 7.5/gal Bloom Time 0/g Recharge 2.5ml/gal Cal Mag 15ml Fox PH Down Thank You @daggaDNA for sharing the Aptus Believers kit and testing my math skills on your birthday. Gotta stay sharp. My birthday is Sunday 12th but I wont put your math skills to test as it requires calculus 😊 Notes on the Hey Abby Grow Box Monday morning, the door to the box would not open. I do not use the child lock so I was confused. I opened the app and the box is offline. I do not know when this happened during the night. That is the reason the door would not open. I had to use the key that I used to open the box initially after shipment. So keep your key. Response time regarding the offline issue was over 5 hours as they are in California.  Resolution was to delete the app and reload. However, it took 3+ days for the resolution. They kept sending me the startup, how to connect by Wi-Fi, Customer support is lacking. The box had been working for 10 days. Fortunately, the app reset with the same data regarding the grow cycle and nothing was lost. Also good thing I checked the settings, I found that switching from germination to autoflower, the light cycle changed from 16/8 to 12/12. I usually run autos on 18/6. I decided to run at 16/8 for now.  The calendar within the app has scheduled daily tasks that indicate what to do when, which includes watering, LST, trimming, adding amendments etc. I created a grow plan based on the scheduled tasks in the calendar. It is downloadable in Excel if you want to create a grow plan for yourself. Note, i easnt able to ioload excel. When you complete them, you check off the calendar. All the highlights in orange are the calendar prompts for tasks.  The blogs indicate the Abby Button should show the environmental stats. Mine does not so I asked if I should get a new button or is my model the basic one without that feature. Mine is the basic version and the button does not show stats. However, if I say Hey Abby it makes a tone as if expecting voice commands. Stay green, growers love 💚🌿 💫Natrona💫

Some of the leaves are still showing problems but I'm confident that the plants will do just fine as they haven't stopped growing new growth. I'm working on setting up another tent so I can give the girls some more room to gro properly as I'm seeing a lot of crouding in their current home.

Started the week out with a mini flush and nutrient change. Plants are looking healthy and seem to be slowing down on the stretch and beginning to form some beautiful bud sights. I defoliated the main plants in the beginning of the week for the last time and will let them finish out their grow without anymore haircuts lol. The BW clones both have stretched pretty tall so far for being a clone going straight to 12/12. The CW clone is doing well and filling out already. So far so good on the grow.