🌿 Week 9: The Grand Root Reveal & Bud Sites Popping! 🏺🥦 Strain: Sticky Broccoli Automatic (Zamnesia) Stage: Mid-Flowering / Bud Development Light Cycle: 18/6 📝 The General Vibe: Welcome to Week 9! The stretch has slowed down, and the "Sticky Broccoli" is officially shifting all her energy into flower production. The canopy is an absolute jungle of tops! Those red and green LST clips did exactly what they were supposed to do, breaking the apical dominance and giving us a beautiful, bushy, multi-topped structure. White pistils are shooting out everywhere, and the bud sites are starting to look like perfect little pompoms. 🏺 The "Vase" Experiment Reveal! This is the moment I’ve been waiting for! I finally pulled back the top layer to check on our hidden structure, and the results are amazing. The main stalk is incredibly thick and woody, and you can see the roots actively gripping and growing right over the little blue vase nested in the soil. The experiment is a massive success so far! She is anchored in deep and looking incredibly sturdy. 🍽️ The Menu (Nutrients) - Powered by Plagron, Hesi & BioBizz: Continuing to push the bloom nutrients to help these flowers swell. Plagron Green Sensation: (The secret weapon for heavier yields and resin production) BioBizz Bio-Down: Keeping the pH dialed in around 5.9 - 6.0 for the coco mix. 🌿 Plant Progress & Observations: Structure: Bushy and dense. The internodal spacing is tight, which means these colas are going to stack up nicely. Health Check: I am noticing some slight yellowing/crisping on the very tips and edges of some of the older, mid-tier fan leaves. It looks like a little bit of nutrient burn from pushing the bloom feeds, or a slight pH fluctuation. I'll be keeping a close eye on the runoff and might dial the EC back just a fraction on the next watering so she stays happy. 👽 The Garden Guardian: Our heavily tattooed Kewpie garden manager is still holding it down in the corner of the tent. No pests, no bad vibes, just pure Eternity Cup focus! Let the bud swelling begin! Growers Love! 💚

I started germination of 1 orange sherbert bean on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plug was just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made hole. Than I sowed my bean into the hole. Ripped off a small piece of rockwool and mulched it up. Lightly filled the hole in with the mulched rockwool. Than stuck the plug into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see a sprout. Once I see some cotlydon leaves bursting to the surface. I will get the plug planted into some 1 gallon pots. Plus get this lady situated into her home. Cant wait! Some Background information on history with Orange Sherbert. I have grown orange sherbert out 3 times and all times had the same result. A shorter extremely branchy robust plant. That dominated the room. Loves training and really ups yeilds doing so. She produces an amazing canopy... just a sea of daggers. Her huge chunky colas pack and amazing orange tangy aroma and just taste like heavenly candy! Barneys Farm hit the nail on the head with this variety! She tends to have a little higher demand for potassium mid flower than most varieties. So a bit heavier on the pk booster and she will be mighty happy! Just a fabulous strain to work with.

Another beautiful week with this lovely lady

Started the flush cycle with straight water. Plants are very frosty and leaves still retain a fair amount of the green color.

Wedding Cake was pretty easy and fast to trim. ! bud weight = dry after 2 weeks

**** Week 12 growth - February 27 to March 5, 2021 - Week 4 Flower ***** These two girls are getting frosty and pheno 1 stacking up beautifully. The second pheno does a funny thing with growing horizontal leaves when happy and not point way up😃 Light intensity increased this week. Pushed up to 525 watts and then to 550 watts at the end of the week. This got the a little hot by the end of the week though. Working with a new light and finding the sweet spots takes a run or two. Learning how the girls grow anyway so the whole run is a lot of learning......its all good😀 Nutrients were pushed a little at the end of last week and the start of this week so backing off a bit more again. Given that they were pushed with light intensity they started showing some signs of nutrient issues. It’s good though as there is reaction time and back off to plain water feed for a couple of days at the end of the week and into week 5. Week 5 is going to be the start of the last stage of flower feed and work with that for two weeks, then stop feeding at the end of week 6........the plan so far anyway. Mimosa is longer strain though so they may get another week.👍 Little more detail....... Feb 27/21 - Day 22 - big feed day - all IPP line plus silica @ 1ml, CalMag @ 1ml, Rezin @ 1.5ml, enzymes @ 1.5ml - 1650ppm and 6.1pH - 4L for MM1 and 3L for MM2 - MM2 grows some horizontal leaves at the top. - MM1 is swelling and getting frost now!!💪😎 Feb 28/21 - Day23 - Microbe day but also added some CalMag - 3L for MM1 and 2L for MM2 - Natures Candy @ 1.5ml, Recharge @ 1/2 tsp/gal, Magnifical @ 1.5ml, Micro @ 1ml, Bloom 1.5ml, Terpinator @ 2ml - 950 ppm and 6.0pH - leaf colour almost looks light today. Mar 1/21 - Day 24 - dry out day. Mar 2/21 - Day 25 - plain water - 300ppm and 6.1 pH - 4L in MM1 and 3L in MM2 - light power pushed up to 550 watts today. - (too much from 16” to 20”........note!!) Mar 3/21 - Day 26 - plain water with two suppliiments - 4L for MM2 and 2.5L for MM2. - Terpinator @ 3ml, Rezin @ 2ml. - 525ppm & 6.0pH - stripped some leaves today......sticky in the middle😃😃👍👍 Mar 4/21 - Day 27 - no water added today - light power reduced today 450 watts. - been going too hard with intensity. Seeing leaf curl on other girls in the tent. - MM2 is showing light stress or Potassium deficiency.....related to CalMag?? - joys of diagnosing cannabis😂 - starting with backing off light and reduce ppm going in but not the ml👍 Mar 5/21 - Day 28 - hit with microbes again to help with stresses. - recharge @ 1 tsp/gal, Nature’s Candy @ 1.5ml - 375ppm and 6.0pH - 3L for MM1 and 2.5L for MM2 Moving right along we are through 4 weeks now and moving past the middle of flower.

It’s the 1st week of flower I flipped the plants to 12/12 a few days ago. There is a lot going on and a lot of cool and amazing things coming in the near future. Make sure to check out my YouTube page. I bought me a DJI gimbal this week. Might be my new favorite toy. The temps are starting to break for the summer. I don’t see it being very long until winter is here and it’s time to use a heater and not an ac unit. All of the plants are healthy. The plants have all grown so well I turned down the light intensity a bit today the plants didn’t seem like they was starting to strech very much. Hopefully the lower light intensity will make them strech out just a bit

Hello friends! Here’s the skinny on my grow “First Mainline Attempt!”. I’m going to split this up a bit so it’s easier to follow, this will be a long one :) ~ Progress Day 56 ~ There’s been a lot of growth happening since I got this new light from KINGLED, genuinely surprised. I could notice the difference within hours that my little ones where love’n the light! Compared to last week the difference is huge (to me). I was using a Bestva LED light for my grows up to this point. I read reviews and thought that would be the best light (Bestva) within my current budget. But my plants didn’t seem happy, or growing at an expected rate, I thought I was doing something wrong. Well long story short the KINGLED has made a impact on my plants, I can’t believe all I needed was more light. I will post the light specs below if you’re interested. Now i’m gonna jump right into this weeks growth. I’ll separate each plant below and provide details on height and structure. ~ Individual Progress Notes ~ [CBD Blueberry] Height: 6.0" Tops: 8 Notes: Smallest of the mothers, and she has a weird asymmetrical growth pattern, the nodes don’t match evenly, not sure what mutation this is. It could be that this strain doesn’t like being mainlined.. If this negatively impacts the overall yield and quality I will kill off this mother plant and clones. I have 2 more seeds to germ so it’s not a total loss. [Mazar] Height: 8.0" Tops: 8 Notes: This girl is responding the best to the mainline experiment, I’m excited to clone her off later. Nice symmetrical growth :) [White Widow] Height: 6.1" Tops: 8 Notes: I honestly thought she would be the runt, guess not! Though not the biggest she has the phatest leaves and thickest canopy. I can only wonder what the next few weeks will be like. Must clone! [Super Silver Haze] Height: 7.2" Tops: 8 Notes: Another that’s responding well to the treatment. I’d like to clone her of as well as soon as there is enough growth for me to collect samples. I’ve only had this strain once so I’m hoping this will be as good or better, who knows :) [Purple Urkle #1] Height: 8.0 Tops: 8 Notes: I lost the clone to this girl, I'll need a replacement(s) to test before I flower, more stretch than the others, hmm (both 1 & 2 need to be tested via clones) [Purple Urkle #2] Height: 9.0 Tops: 8 Notes: This girl is very stretchy and her clone is insane! Thickest stalk out of any of my girls? I don't know why but she is phat, love it. Check out my diary "A Few Clones" if you're interested in this possible monster of a plant :) ~ Concerns ~ My only real concern at this point is mite and insect control. This grow is in the garage so that’s not especially easy to avoid. Staying vigilant and nuke’n everything that moves (without harming my plants) is working so far. Those pesky mites and other fan favorite insects! I swear I’ll get my revenge >:( ~ Final Thoughts ~ Other than the local mite population making claims to my property, I’m very satisfied with this weeks progress. Installing the ducting and fans was the hardest chore I had to do, and now that’s taken care of. Before I finish up I want to apologize for not being as detailed and thorough these past few weeks. Now this is a bit personal but I’m willing to share it with ya’ll. My mother has stage 4 cancer, yeah… It hasn’t hit me like a train yet, but I’m still suffering. I’m trying to prepare myself in the event she doesn't make it through chemo and that’s a tough pill to swallow friends. Hopefully I can produce some cbd medicine for her to ease her pain, and help to improve her quality of life. I’m going to close this weeks update by saying thank you to all of you wonderful people, the support and comments make my day, I appreciate em all. Much love, Meus [Light Specs] Brand: KINGLED Series: King Plus Model: 3000 watt Replacement: 2000 watt Avg Power Draw: 615 watt Input Voltage(AC): 85-265 Volts Frequency: 50-60 Hz Lifespan: 50,000 hours Total LEDs: 300 Core Coverage Area at 24": 7.8' x 7.5' PAR at 18": 760 μmol/m2s Lumens: 23454.6 Weight: 15.8 lbs

Really started to fill out now most branches are supported with fishing line cant wait to see wat comes off it defo one of my new fav strains

The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. Week #1 All seeds have germinated in 48 hours after soaking in water. The germ has grown in wet cotton for 24 hours and has grown 1 cm long. All the seedlings popped out from the soil the 02/12/19 after 48 hours in the cups. Making the germination ratio at 100%. I was a bit worried to use the Mars-Hydro SP250 on seedlings, but at 75cm following manufacturer recommendations everything looks perfect. Environment is under control, light, humidity, temperature, and airflow. Seedlings are not going looney and stretching for the light . Using only pH’d water with some RootBooster at this stage to enhance roots development. (I’m looking for a job in the cannabis industry as Master Grower, Mineralogist, Quality Control)

Some mild defoliation this week. Budding up nicely and starting to frost. This girl was having a foliar feed of algae last week but this week she's getting light foliar sprays of the Lacalva stress treatment from madame grow on top of her other feed. I'll do this every 2/3 mornings and I'll only lightly mist the top. I'll concentrate most of my foliar feed on the lower growth and undersides, away from the buds. This is the main reason I kept so many lower fan leaves this time.

..somit geht die 4 Blütewoche zuende. Langsam wirds frostig ?

Pretty nice buds coming in

week 7 first flowering week when I finally discovered my princess was actually a prince. 12/12 flowermind ferts (6ml + 0.5g) LST + defoliation started seeing some thrips again, but just a few, nothing to worry so, the plant stayed for 4 weeks in the tent, under COB LED 200W.

After two years of cultivation we wanted to re-propose one of our favorite strains 🤩 The first time we debuted we did it with her and we hit the box office by winning the first place in the competition .... LET'S SEE IF WE CAN REPROPOSE US BY IMPROVING CULTURE APPROACHES ! I hope you enjoy the content and I leave it up to you to judge the progress of my growing experience

Stretch 8cm Jour63 arrosage avec deux litres d'eau ph6.6 Jour66 grosse defolliation et arrosage avec de l'eau ph6.3 à laquelle j'ajoute un gramme par litre d'eau de feeding enhancer greenhouse